SPEC NO: DSAG4989 REV NO: V.10A DATE: APR/07/2013 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1361000051
SURFACE MOUNT DISPLAY
Part Number: ACPSA04-41SEKWA
Super Bright Orange
Features
z0.4 inch character height.
zLow current operation.
zHigh contrast and light output.
zCategorized for luminous intensity.
zMechanically rugged.
zGray face,white segment.
zPackage : 400pcs / reel.
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG4989 REV NO: V.10A DATE: APR/07/2013 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1361000051
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Orange 601 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA
C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA
IR Reverse Current Super Bright Orange 10 uA VR=5V
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Super Bright Orange (AlGaInP) White Diffused
21000 44000 Common Anode, Rt.
Hand Decimal.
*5600 *13000
ACPSA04-41SEKWA
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAG4989 REV NO: V.10A DATE: APR/07/2013 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1361000051
Super Bright Orange ACPSA04-41SEKWA
SPEC NO: DSAG4989 REV NO: V.10A DATE: APR/07/2013 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1361000051
ACPSA04-41SEKWA
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG4989 REV NO: V.10A DATE: APR/07/2013 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1361000051
PACKING & LABEL SPECIFICATIONS ACPSA04-41SEKWA
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes