A019505 - Apem - Datasheet.Live

G-2 APEM www.apem.com

A1-A01-A02-A03 series

Industrial controls

Distinctive features

The A01 and A02 series offer ranges of :

- pushbutton switches, illuminated or not

- indicators

- 2 or 3 position keylock switches

- 2 or 3 position rotary lever switches

with rectangular, square or round operators.

❑ Environmental protection : IP65

❑ Modular construction

❑ Electrical life : 50.000 cycles min.

❑ Screen engraving or insertable legends on request

❑ Approvals (for switch blocks only)

UL 1054 BS RIA 20 Shock & Vibration

EN 61058-1

A01 - A1 - A03 series

• Panel cut-out :

Ø 16 mm (.630), except :

- flush mount round : Ø 22 mm (.866)

- flush mount rectangular : 20.60 x 26.70 mm

- flush mount square : 20.60 x 20.60 mm

- A1 series : Ø 22 mm (.866)

- A03 series : round or square Ø 22 (.866)

flush mount : Ø 30 mm (1.378)

• 1, 2, 3 and 4 poles

• Solder lug/quick-connect terminals

• Contacts : silver, gold plated

• Current/voltage rating :

6A 250VAC max. - 10mA 5VAC min.

These values are applicable for all components, accessories

and lamps, unless otherwise specified in the following pages.

• Lamp : filament, neon or LED

A02 series

• Panel cut-out :

- round or square : Ø 22 mm (.866)

- rectangular : 29,5 x 21,5 mm (1.160x.846)

- flush mount : Ø 30 mm (1.378)

• 1 and 2 poles

• Screw terminals (optional : quick-connect term.)

• Contacts : silver

• Current/voltage rating : 12A 380VAC

16A 250VAC max. - 25mA 5VAC min.

These values are applicable for all components, accessories

and lamps, unless otherwise specified in the following pages.

• Lamp : filament, neon, LED

or special multi-LED array

Option : end cap terminal guard. Order separately (see

end of A02 series).

Each sub-assembly has

to be ordered separately.

Packaging unit :

A1 : 25 pieces - A01 : 20 pieces (except pushbuttons: 25 pieces) - A02 : 25 pieces - A03 : 10 pieces.

Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.

The company reserves the right to change specifications without notice.

UG1410A-R1

APEM www.apem.com G-3

A1-A01-A02-A03 series

Industrial controls

Specifications for pushbutton, keylock and rotary switches

ELECTRICAL SPECIFICATIONS

A01 - A1 - A03 A02

• Function :

Momentary Momentary

or maintained action or maintained action

• Current/voltage rating : 10mA 5VAC min. 25mA 5VAC min.

6A 250VAC max. - 6A 12VDC max.

12A 380VAC - 16A 250VAC max.

12A 12VDC max.

• Contact gap > 1 mm (.039)

Double break 2 x 1,5 mm (.059)

• Initial contact resistance : 10mΩ max. at 1A 4VDC 10mΩ max. at 1A 4VDC

• Insulation resistance : 50 MΩ min. 50 MΩ min.

• Dielectric strength : 750V between open contacts 2KV between open contacts

5KV live to accessible 4KV live to accessible

• Electrical life (resistive load) : 50.000 cycles 50.000 cycles

• Insulation : Class 2 Class 2

• Lamp life :

LED : 60.000 h min. to 75% relative LED : 60.000 h min. to 75 % relative

luminosity - Filament : approx. 5.000 h luminosity - Filament : approx. 5.000 h

Neon : approx. 10.000 h Neon : approx. 10.000 h

• Lamp circuit diagrams

GENERAL SPECIFICATIONS

A01 - A1 - A03 A02

• Min. mechanical life :

Pushb. momentary : 1 million cycles Pushb. momentary: 1 million cycles

Pushb. maintained : 100.000 cycles Pushb. maintained : 100.000 cycles

Keylock and rotary : 100.000 cycles Keylock and rotary : 100.000 cycles

• Panel thickness 8 mm (.315) max. 8 mm (.315) max.

• Operating temperature : -20°C to +55°C -20°C to +85°C

• Solder heat resistance : 350°C, 5 sec. 350°C, 5 sec.

(IEC 68-2-20Tb, method 2)

• Degree of environmental IP 65 front of panel IP 65 front of panel

protection (IEC 529 ) IP 40 back of panel IP 40 back of panel

• Lamps : Midget Grooved T13/4, Midget Grooved T13/4,

filament, LED or neon filament, LED or neon

Special multi-LED array

• Switch terminals :

Solder/quick-connect 2,8 mm (.110) M3 screws - wire 2 x 0,75 mm2 max.

• Lamp terminals :

Solder/quick-connect 2,8 mm (.110) M3 screws

Flexible wire 2 x 2,5 mm2 max.

Rigid wire 4 mm2 max.

For screen engraving or film legends, contact APEM.

A B

G-4 APEM www.apem.com

A1 series

Engraved aluminium flush mounting pushbuttons and indicators

Panel cut-out Ø 22 (.866)

42.05

(1.655)

8.5

(.335)

18.00

(.709)

18.00

(.709)

14.5

(.571)

Ø25.00

(9.85 DIA)

2.8

(.110)

12.00

(.472)

7.65

(.301)

15.3

(.602)

0.5

(.020)

A pushbutton assembly requires :

engraved screen + lamp (if illuminated) + operator + switch block + flush mount bezel.

To order these elements, select desired model numbers from the table below.

Example : pushbutton, round, illuminated, sealed to IP65, latching, single pole with “start”

engraving, 24V blue LED and flush mounting bezel = A1PCA1X103K403.

01 - Front Fog Lights

02 - Rear Fog Lights

03 - ‘Start’

04 - Interior Light

05 - Boot Release

06 - Hazard Warning

07 - Lights

08 - Heating & Ventilation

09 - Map Lights

10 - Side Lights

11 - ‘Lock’

12 - ‘Unlock’

13 - Rear Window Heating

14 - Cooling

15 - Wipers

16 - Washers

17 - Fan

18 - Horn

19 - Air recirculation

20 - Blank

Engraved Screen Options

Switch Type

P - pushbutton

I - indicator

Accessories

03 - flushmount

Bezel

C - round

Illumination

A - illuminated

B - non-illum.

Sealing

0 - unsealed

1 - sealed IP65

Function

0 - indicator

X - latching

Y - momentary

Switch block

0 - indicator

1 - single pole

2 - double pole

5 - three pole

3 - four pole

Bulb

A1 - filament 6.3V

B1 - filament 14V

C1 - filament 28V

D1 - filament 36V

E1 - filament 48V

F1 - filament 60V

G1 - Neon 110V

H1 - Neon 220V

I1 - Led 6V red

I2 - Led 6V green

I3 - Led 6V amber

J1 - Led 12V red

J2 - Led 12V green

J3 - Led 12V amber

J4 - Led 12V blue

J5 - Led 12V white

K1 - Led 24V red

K2 - Led 24V green

K3 - Led 24V amber

K4 - Led 24V blue

K5 - Led 24V white

L1 - Led 48V red

L2 - Led 48V green

L3 - Led 48V amber

OTHER SCREEN ENGRAVING OPTIONS :

contact APEM.

APEM www.apem.com G-5

A01 series

Illuminated or non-illuminated pushbutton switches

Panel cut-out Ø 16 (.630)

6.1( )

93.(

(.020)

(.709)

(.110)

(.709)

)

(

)

(

)

)AID 907.(

(.709)

(.236)

(.472)

)

533

(

00.

100

0.81x0

81 0

42Ø 0

12.00

6.00

18.00

0.50

18.00

2.80

18.00

)

(04.

(1.209)

1.1(

(.945)

(.236)

6.00

24.00

30.70

1 2 3

321

1 2 3

CD EFC D

)

(.236)

6.00

)

.( 0

16.25

(.640)



9.00

(.354)

9.00

(.354)

A pushbutton assembly requires :

screen + lamp (if illuminated) + operator + switch block.

To order these elements, select desired model numbers from tables below.

Example : IP65 rectangular pushbutton, single pole, maintained, red screen and 12V red LED =

A0161B, A0142M1, A0101X and A0151B.

Screen Lamp Operator Switch block

SCREEN ENGRAVING/INSERTABLE LEGENDS : contact APEM

Bezel: rectangular, square, round, ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated

❶❷❸❹

UNSEALED SWITCHES (IP40) :

add “01” to end of operator

model number.

BI-COLOUR LED’s optional.

Bezel Colour Part No

black A0161A

red A0161B

amber A0161C

yellow A0161D

green A0161E

blue A0161F

clear A0161G

white A0161J

black A0162A

red A0162B

amber A0162C

yellow A0162D

green A0162E

blue A0162F

clear A0162G

white A0162J

black A0163A

red A0163B

amber A0163C

yellow A0163D

green A0163E

blue A0163F

clear A0163G

white A0163J

Pole Bezel Description Part No

1 or 2 Illum, momentary A0101Y

1 or 2 Illum, maintained A0101X

1 or 2 Non-illum, momentary A0102Y

1 or 2 Non-illum, maintained A0102X

3 or 4 Illum, momentary A0103Y

3 or 4 Illum, maintained A0103X

3 or 4 Non-illum, momentary A0104Y

3 or 4 Non-illum, maintained A0104X

1 or 2 Illum, momentary A0105Y

1 or 2 Illum, maintained A0105X

1 or 2 Non-illum, momentary A0106Y

1 or 2 Non-illum, maintained A0106X

3 or 4 Illum, momentary A0107Y

3 or 4 Illum, maintained A0107X

3 or 4 Non-illum, momentary A0108Y

3 or 4 Non-illum, maintained A0108X

1 or 2 Illum, momentary A0109Y

1 or 2 Illum, maintained A0109X

1 or 2 Non-illum, momentary A0110Y

1 or 2 Non-illum, maintained A0110X

3 or 4 Illum, momentary A0111Y

3 or 4 Illum, maintained A0111X

3 or 4 Non-illum, momentary A0112Y

3 or 4 Non-illum, maintained A0112X

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

No of poles Part No

Single pole A0151B

Double pole A0152B

Three pole A0155B

Four pole A0153B

G-6 APEM www.apem.com

A01 series

Indicators

Panel cut-out Ø 16 (.630)

An indicator assembly requires :

screen + lamp + operator.

To order these elements, select desired model numbers from tables below.

Example : IP65 rectangular indicator with red screen and 12V red LED = A0161B, A0142M1

and

A0171.

(.945) (.709) (.709 DIA)

(.709)

18.00

24.00 Ø18.00

18.00

(1.654) (.394)

(.020) (.110)

(.335)

(.330)

10.0042.00

8.40

0.50

8.50

2.80

Screen Lamp Operator

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM

Bezel: rectangular, square, round

❶❷❸

UNSEALED INDICATORS (IP40) :

add “01” to end of operator model

number.

Bezel Colour Part No

black A0161A

red A0161B

amber A0161C

yellow A0161D

green A0161E

blue A0161F

clear A0161G

white A0161J

black A0162A

red A0162B

amber A0162C

yellow A0162D

green A0162E

blue A0162F

clear A0162G

white A0162J

black A0163A

red A0163B

amber A0163C

yellow A0163D

green A0163E

blue A0163F

clear A0163G

white A0163J

Bezel Description Part No

Indicator A0171

Indicator A0172

Indicator A0173

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

APEM www.apem.com G-7

A01 series

Rotary lever switches

Panel cut-out Ø 16 (.630)

(1.654) (.394)

(.020)

(.709)

(.110)

(.709)

(.301)

(.945)

(.709 SQ)

(.709 DIA)

(.709)

(1.209)

(1.122)

(.945)

(.236)

(.472)

10.0042.00

7.65

28.50

18.00x18.00

24.00

Ø18.00

12.00

6.00

18.00

24.00

0.50

18.00

2.80

18.00 30.70

(.330)

8.40

1 2 3

321

1 2 3

321

1 2 3

CDEF

A rotary lever switch assembly requires :

operator + switch block.

To order these elements, select desired model numbers from tables below.

Example : IP65 rectangular rotary switch with long lever, clockwise rotation, single pole,

2 positions, maintained

= A019109 and A0151B.

• Lever Rotation - 2 position switches

The model numbers shown are for switches

with clockwise lever rotation.

For anticlockwise rotation, replace :

09 with 01

10 with 02

11 with 03

12 with 04

at the end of the model number.

Lever Positions

Operator Switch block

Bezel: rectangular, square, round, ‘pos’ - position, ‘mainL’ - maintained left, ‘momR’ - momentary right, etc

❶❷

See above photo left.

To order, add “WL” to the end of the operator

part No.

Example : A019609WL..

Optional Engraving on

Lever end

Pole Bezel Description Short lever Long lever

1 or 2 2 pos. maintained A019209 A019109•

1 or 2 2 pos. momentary A019210 A019110•

3 or 4 2 pos. maintained A019211 A019111•

3 or 4 2 pos. momentary A019212 A019112•

1 or 2 3 pos. maintained A019205 A019105

1 or 2 3 pos. momentary A019206 A019106

1 or 2 3 pos. mainL, momR A019207 A019107

1 or 2 3 pos. momL, mainR A019208 A019108

1 or 2 2 pos. maintained A019409 A019309•

1 or 2 2 pos. momentary A019410 A019310•

3 or 4 2 pos. maintained A019411 A019311•

3 or 4 2 pos. momentary A019412 A019312•

1 or 2 3 pos. maintained A019405 A019305

1 or 2 3 pos. momentary A019406 A019306

1 or 2 3 pos. mainL, momR A019407 A019307

1 or 2 3 pos. momL, mainR A019408 A019308

1 or 2 2 pos. maintained A019609 A019509•

1 or 2 2 pos. momentary A019610 A019510•

3 or 4 2 pos. maintained A019611 A019511•

3 or 4 2 pos. momentary A019612 A019512•

1 or 2 3 pos. maintained A019605 A019505

1 or 2 3 pos. momentary A019606 A019506

1 or 2 3 pos. mainL, momR A019607 A019507

1 or 2 3 pos. momL, mainR A019608 A019508

No of poles Part No

Single pole A0151B

Double pole A0152B

Three pole A0155B

Four pole A0153B

G-8 APEM www.apem.com

A01 series

Keylock switches

Panel cut-out Ø 16 (.630)

Bezel: rectangular, square, round, ‘pos’ - position, ‘mainL’ - maintained left, ‘momR’ - momentary right, etc

(1.654) (1.496)

(.020)

(.709)

(.110)

(.709)

(.301)

(.945)

(.709 SQ)

(.709 DIA)

(.709)

(.945)

(.236)

(.472)

38.0042.00

7.65

18.00x18.00

24.00

Ø18.00

12.00

6.00

18.00

24.00

0.50

18.00

2.80

18.00

(.330)

8.40

(1.209)

(1.122)

28.50

30.70

1 2 3

321

1 2 3

321

1 2 3

CD EF

A keylock switch assembly requires :

operator + switch block.

To order these elements, select desired model numbers from tables below.

Example : IP65 rectangular keyswitch, clockwise rotation, single pole, 2 positions, maintained

= A018125 and A0151B

• Key Rotation - 2 position switches

The model numbers shown are for switches

with clockwise key rotation.

For anticlockwise rotation, replace :

25 with 01

24 with 02

27 with 03

28 with 04

at the end of the model number.

2 standard keys are supplied.

20 key barrel types available.

Operator Switch block

Key Positions

❶❷

NON-REMOVABLE KEY POSITIONS / ON-ON-ON FUNCTION : contact APEM.

Pole Bezel Description Part No Key removable

1 or 2 2 pos. maintained A018123 A

1 or 2 2 pos. maintained A018125• A-B

1 or 2 2 pos. momentary A018124• A

3 or 4 2 pos. maintained A018127• A-B

3 or 4 2 pos. momentary A018128• A

1 or 2 3 pos. maintained A018105 A-B-C

1 or 2 3 pos. momentary A018106 A

1 or 2 3 pos. mainL, momR A018107 A-B

1 or 2 3 pos. momL, mainR A018108 A-C

1 or 2 2 pos. maintained A018223 A

1 or 2 2 pos. maintained A018225• A-B

1 or 2 2 pos. momentary A018224• A

3 or 4 2 pos. maintained A018227• A-B

3 or 4 2 pos. momentary A018228• A

1 or 2 3 pos. maintained A018205 A-B-C

1 or 2 3 pos. momentary A018206 A

1 or 2 3 pos. mainL, momR A018207 A-B

1 or 2 3 pos. momL, mainR A018208 A-C

1 or 2 2 pos. maintained A018323 A

1 or 2 2 pos. maintained A018325• A-B

1 or 2 2 pos. momentary A018324• A

3 or 4 2 pos. maintained A018327• A-B

3 or 4 2 pos. momentary A018328• A

1 or 2 3 pos. maintained A018305 A-B-C

1 or 2 3 pos. momentary A018306 A

1 or 2 3 pos. mainL, momR A018307 A-B

1 or 2 3 pos. momL, mainR A018308 A-C

No of poles Part No

Single pole A0151B

Double pole A0152B

Three pole A0155B

Four pole A0153B

APEM www.apem.com G-9

A01 series

Mushroom head pushbutton switches

Panel cut-out Ø 16 (.630)

• Prominent 24 mm (.944) dia. or optional 40 mm (1.575) dia. mushroom actuators

• Momentary and maintained functions

Momentary function versions are unmarked.

Maintained function versions are twist release (arrows indicate direction of twist)

• Various coloured mushroom actuators are available.

(1.654) (1.047)

(.020)

(.709)

(.110)

(.709)

19.0042.00

(.945DIA)

Ø24.00

0.50

18.00

2.80

18.00

(.330)

8.40

Ø40.00

(1.575 DIA)

OPTION : SP3 VERSION

Option : SP3 version

❶❷

Operator Switch block

No of poles Part No

Single pole A0151B

Double pole A0152B

Three pole A0155B

Four pole A0153B

Actuator Description Part No

24mmØ Black momentary A01MMA

24mmØ Red momentary A01MMB

24mmØ Yellow momentary A01MMD

24mmØ Green momentary A01MME

24mmØ Blue momentary A01MMF

24mmØ Black maintained A01MXA

24mmØ Red maintained A01MXB

24mmØ Yellow maintained A01MXD

24mmØ Green maintained A01MXE

24mmØ Blue maintained A01MXF

40mmØ Black momentary A01MMA SP3

40mmØ Red momentary A01MMB SP3

40mmØ Yellow momentary A01MMD SP3

40mmØ Green momentary A01MME SP3

40mmØ Blue momentary A01MMF SP3

40mmØ Black maintained A01MXA SP3

40mmØ Red maintained A01MXB SP3

40mmØ Yellow maintained A01MXD SP3

40mmØ Green maintained A01MXE SP3

40mmØ Blue maintained A01MXF SP3

G-10 APEM www.apem.com

A1-A01 series

Industrial controls

Accessories

FLAPGUARDS

FLUSH MOUNTING BEZELS Dark grey plastic material - supplied with sealing washer

Rectangular A01FG1

Rectangular A01FM1 Square A01FM Round A01FM2

Square/round A01FG2

(.537)

13.65

24.00

(.945)

12.00

(.472) 13.50

(.531)

24.00

(.945)

(.531)

(.537)

13.65

(.945)

24.00

(.354)

9.00 13.50

(.708)

18.00

12.00

(.472)

20.60

(.811 )

+0.20

0.00

.000

+.008

(1.051 )

26.70

(1.173)

29.80

+0.20

0.00

.000

+.008

20.40

(.712)

18.10

(.803)

(.630DIA)

Ø16.00

23.80

(.937)

FLUSH MOUNTING BEZELS Metal versions

Round, anodised aluminium A01FMM

Round, matt black A01FMMG

+.008

(.874 )

22.20

11.00

(.433)

(.715)

18.15

(.866 DIA)

Ø22.00

0.00

.000

+0.20

(.630DIA)

Ø16.00

(.984 DIA)

Ø25.00

+.008

(.811 )

.000

20.60 0.00

+0.20

(.472)

12.00 (.937)

23.80

20.40

(.712)

18.10

(.803)

(.937)

23.80

(.630DIA)

Ø16.00

+.008

(.874 )

22.20

11.00

(.433)

(.715)

18.15

(.866 DIA)

Ø22.00

0.00

.000

+0.20

(.630DIA)

Ø16.00

(.984 DIA)

Ø25.00

5.00

(.196)

10.25

(.403)

18.40

(.724)

7.65

(.301)

7.65

(.301)

1.10

(.043)

4.25

(.167)

4.25

(.167)

0.80

(.031)

6.00

(.236)

18.25

(.719)

6.00

(.236)

Single pole, non illuminated A01PC1

Double pole, non illuminated A01PC2

Single pole, illuminated A01PC3

Double pole, illuminated A01PC4

Indicator A01PC5

Single pole, E-stop A01PC6

Double pole, E-stop A01PC7

PCB SOCKET

APEM www.apem.com G-11

A1-A01 series

Industrial controls

Accessories

Ø16.00

(.629DIA)

18.00

(.708)

2.00

(.078)

18.00

(.708)

14.75

(.580)

ANTI ROTATION RING Recommended to prevent product rotation

Resistor assembly - 2 stage illumination

A01LW

METAL GUARDS ➞Slot as alternative to Ø 2 mm hole - Material : 1 mm thick aluminium.

Rectangular A01MG1 Square A01MG Round, natural A01MG2

Matt black A01MG2G

(.630DIA)

Ø16.00

(.944)

24.00

(.399)

10.15

Ø2.00

(.078DIA)

(.708)

18.00

(.472)

12.00

SWITCHBLOCK TERMINAL GUARDS

2 way A01RTC2 8 way A01RTC8

18.00

(.717)

18.20

(.630DIA)

Ø16.00

(.708) 12.00

(.472)

(.712 DIA)

Ø18.10

Ø16.05

(.350)

8.90

9.80

(.385)

Ø19.60

(.771 DIA)

(.631DIA)

(.289)

(.413)

10.50

(.393)

10.00

20.75

(.816)

14.85

(.584)

7.35

(.236)

20.75

(.393)(.413)

(.816)

10.50

20.75

(.816)

7.45

10.00

8.50

(.334)

(.293)

6.00

Ø18.0

(.709 DIA) 18.0

(.709)

18.0

(.709)

18.0

(.709)

24.0

(.946)

BLANKING PLUGS

Round A0133 Square A0132 Rectangular A0131

RESISTOR ASSEMBLY

A0152B + RISSP

(DIM) normally closed (BRIGHT) normally open

G-12 APEM www.apem.com

A1-A01 series

Industrial controls

Installation - tools

Modular construction / panel mounting

SWITCH BLOCK

FIXING

NUT

PANEL

BULB

REFLECTOR

LOCATING

SLOT

LEGEND

SCREEN

EMERGENCY

STOP

ROTARY

LEVER SWITCHES

KEYLOCK

SWITCHES

PUSHBUTTONS

& INDICATORS

LATCH

OPERATOR

(.157 MAX)

4.00 Maxi

SEAL

POLARISING

DOT

PANEL CUT-OUT

Round & square operators only

Rectangular operators only

Max. panel thickness : 8 mm (.315)

PANEL MOUNTING ASSEMBLY

• Drill/punch hole shaped as above.

• Assemble front operator through hole, fit fixing nut and

tighten to a maximum torque of 0,8Nm using tool

No 30-0001.

• Wire chosen switch block as required and slide onto

operator until latch engages.

• Fit bulb if required using tool No 30-0002.

• Snap screen onto reflector assembly with legend in

between if required and snap onto front operator TAKING

CARE TO LINE UP THE LOCATING SLOT WITH THE

POLARISING DOT, and not to damage the seal.

TO REMOVE BULB

Remove reflector/screen assembly. Use the bulb extractor

30-0002 to remove the bulb.

SWITCH BLOCK

To assemble switch block to front operator, TAKE CARE

TO LINE UP SWITCH BLOCK WITH FRONT OPERATOR.

Once in position, slide on to front operator. NB. : Ensure

latch is fully engaged correctly onto the switch block.

To remove switch block, depress the latch and slide the

switch block off the operator.

(.059)

(

(.285)

1.50

Ø16.00

.000/+.011

0.00/+0.30

(.629 DIA )

7.25

)

(.413)

(

(.078 DIA)

Ø2.00

10.50

)

(.629 DIA )

0.00/+0.30

.000/+.011

Ø16.00

FIXING NUT KEY

30-0001

BULB REMOVER

30-0002

APEM www.apem.com G-15

A02 series

Illuminated or non-illuminated pushbutton switches

Panel cut-out Ø 22 (.866) or 29,5 x 21,5 (1.160x.846)

(.394)(2.185)

(1.319) (.827)

(.394)

(2.520)(1.062)

(2.520) (.394)

(.827)

(1.142)

(1.319)

(1.417)

(1.142 SQ)

(1.142 DIA)

(.945)

10.0055.50

24.00

10.00

64.0027.00

29.00x29.00

Ø29.00

64.00 10.00

29.00

36.00

33.50 21.00

21.00

33.50

A pushbutton assembly requires :

screen + lamp (if illuminated) + operator + one or two switch blocks.

To order these elements, select desired model numbers from tables below.

Example : IP65 illuminated rectangular maintained pushbutton, switch block with 2 N.O. contacts,

red screen and 12V red LED = A0261B, A0142M1, A0201X and A02503.

N.C.

N.O. N.O./N.C.

Screen Lamp Operator Switch block

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM.

Bezel: rectangular, square, round, ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated

Second switch block

UNSEALED SWITCHES (IP40) :

add “01” to end of operator model number.

To achieve 3 or 4 pole switching,

add second switch block, from

above table.

❶❷❸❹

Bezel Colour Part No

black A0261A

red A0261B

amber A0261C

yellow A0261D

green A0261E

blue A0261F

clear A0261G

white A0261J

black A0262A

red A0262B

amber A0262C

yellow A0262D

green A0262E

blue A0262F

clear A0262G

white A0262J

black A0263A

red A0263B

amber A0263C

yellow A0263D

green A0263E

blue A0263F

clear A0263G

white A0263J

LampVoltagePart No

Filament 6.3VA0141A

Filament 14VA0141B

Filament 28VA0141C

Filament 36VA0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED6V green A0142L2

LED 6V amber A0142L3

LED12V red A0142M1

LED12V green A0142M2

LED12V amber A0142M3

LED12V blueA0142M4

LED12V white A0142M5

LED24V red A0142N1

LED24V green A0142N2

LED24V amber A0142N3

LED24V blueA0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

Bezel Description Lamp type Part No

Illum, momentary Lamp/LED A0201Y

Illum, maintained Lamp/LED A0201X

Non-illum, maintained A0203X

Non-illum, momentary A0203Y

Illum, momentary Lamp/LED A0204Y

Illum, maintained Lamp/LED A0204X

Non-illum, momentary A0206Y

Non-illum, maintained A0206X

Illum, momentary Lamp/LED A0207Y

Illum, maintained Lamp/LED A0207X

Non-illum, momentary A0209Y

Non-Illum, maintained A0209X

The company reserves the right to change specifications without notice.

UG1410A-R1

G-16 APEM www.apem.com

A02 series

Metal bezel pushbutton switches and indicators

Panel cut-out Ø 22 (.866)

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM.

Bezel: rectangular, square, round, ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated

A pushbutton assembly requires :

screen + lamp (if illuminated) + operator + one or two switch blocks.

An indicator assembly requires : screen + lamp + operator

To order these elements, select desired model numbers from tables below.

Example : IP65 illuminated metal bezel maintained pushbutton, switch block with 2 N.O. contacts,

red screen and 12V red LED = A0263B, A0142M1, A0211X and A02503.

N.C.

N.O. N.O./N.C.

❶❷❸❹

Screen Lamp Operator Switch block

Second switch block

To achieve 3 or 4 pole switching,

add second switch block, from

above table.

Std bezel material : nickel plated brass.

For optional black finish, add “G” to the end of

operator model number.

UNSEALED SWITCHES (IP40) :

add “01” to end of operator model number.

(.452)

11.50

(2.952)

75.00

(1.791)

45.50

(1.142DIA)

Ø29.00

(1.338)

34.00 (.826)

21.00

(1.142DIA)

Ø29.00

Bezel Colour Part No

black A0263A

red A0263B

amber A0263C

yellow A0263D

green A0263E

blue A0263F

clear A0263G

white A0263J

Bezel Description Lamp type Part No

Illum, momentary Lamp/LED A0210Y

Illum, maintained Lamp/LED A0210X

Non-illum, momentary A0212Y

Non-illum, maintained A0212X

Illum, indicator Lamp/LED A0277

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

APEM www.apem.com G-17

A02 series

Flush mounting pushbutton switches and indicators

Panel cut-out Ø 30 (1.181)

A pushbutton assembly requires :

screen + lamp (if illuminated) + operator + one or two switch blocks.

An indicator assembly requires : screen + lamp + operator

To order these elements, select desired model numbers from tables below.

Example : IP65

illum. flush mounting maintained pushbutton, switch block with 2 N.O. contacts

red screen and 12V red LED = A0263B,

A0142M1

, A0213X and A02503.

N.C.

N.O. N.O./N.C.

❶❷❸❹

Screen Lamp Operator Switch block

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM.

Bezel: rectangular, square, round, ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated

Second switch block

To achieve 3 or 4 pole switching,

add second switch block, from

above table.

Std bezel material : silver anodised aluminium.

For optional black anodised aluminium, add “G”

to end of operator model number.

UNSEALED SWITCHES (IP40) :

add “01” to end of operator model number.

(1.338) (.826) (1.181)

(.078)

2.00

(2.874)

73.00

34.00 21.00

(1.811)

46.00

(1.378DIA)

Ø35.00

30.00

DECOUPE DU PANNEAU

(1.378DIA)

Ø35.00

PANEL CUT-OUT

Bezel Colour Part No

black A0263A

red A0263B

amber A0263C

yellow A0263D

green A0263E

blue A0263F

clear A0263G

white A0263J

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

Bezel Description Lamp type Part No

Illum, momentary Lamp/LED A0214Y

Illum, maintained Lamp/LED A0214X

Non-illum, momentary A0215Y

Non-illum, maintained A0215X

Illum, indicator Lamp/LED A02791

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

G-18 APEM www.apem.com

A02 series

Indicators

Panel cut-out Ø 22 (.866) or 29,5 x 21,5 (1.160x.846)

An indicator assembly requires :

Screen + lamp, LED or LED assembly + operator.

To order these elements, select desired model numbers from tables below.

Example : IP65 rectangular indicator with red screen and 12V red LED = A0261B,

A0142M1

and A0272.

(1.142)

(1.417)

(1.142 SQ)

(1.142 DIA)

(.945)

24.00

29.00x29.00

Ø29.00

29.00

36.00

33.50

(1.319)

33.50

(1.319)

(.827)

21.00

(.827)

21.00

10.00

(.394)

10.00

(.394) (1.142)

29.00

37.50

(1.476)

Screen Lamp Operator

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM.

Bezel: rectangular, square, round,

❶❷❸

UNSEALED INDICATORS (IP40) :

add “01” to end of operator model number.

Bezel Description Lamp type Part No

Indicator Lamp/LED A0271

Indicator Lamp/LED A0273

Indicator Lamp/LED A0275

Bezel Colour Part No

black A0261A

red A0261B

amber A0261C

yellow A0261D

green A0261E

blue A0261F

clear A0261G

white A0261J

black A0262A

red A0262B

amber A0262C

yellow A0262D

green A0262E

blue A0262F

clear A0262G

white A0262J

black A0263A

red A0263B

amber A0263C

yellow A0263D

green A0263E

blue A0263F

clear A0263G

white A0263J

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

APEM www.apem.com G-19

A02 series

Rotary switches

Panel cut-out Ø 22 (.866)

(.827)

(2.520)(1.062)

(2.520)

(1.142)

(1.319)

64.0027.00

64.00

29.00

21.00

33.50

20.00

(.787)

29.00x29.00

(1.142 SQ)

Ø29.00

(1.142 DIA)

22.00

(.866)

22.00

(.866)

A rotary lever assembly requires :

operator + one or two switch blocks.

To order these elements, select desired model numbers from tables below.

Example : IP65 square 2 position maintained rotary switch with long lever, clockwise rotation,

switch block with 2 N.O. contacts = A029107 and A02503.

N.C.

N.O. N.O./N.C.

❶❷

• Lever Rotation - 2 position switches

The model numbers shown are for switches

with clockwise lever rotation.

For anticlockwise rotation, replace :

07 with 01

08 with 02

at the end of the model number.

To order, add “WL” to the end of the part No.

Example : A029407WL.

Operator Switch block

Bezel: square, round,

Lever positions

Optional engraving

on lever end

Second switch block

To achieve 3 or 4 pole switching,

add second switch block, from

above table.

OPTION

To specify flush mounting (Ø 30 mm) option,

add “FM” to the end of the part number (for

round operators only).

Example : A029407FM.

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Bezel Description Short lever Long lever

2 pos. maintained A029207 A029107•

2 pos. momentary A029208 A029108•

3 pos. maintained A029203 A029103

3 pos. momentary A029204 A029104

3 pos. mainL, momR A029205 A029105

3 pos. momL, mainR A029206 A029106

2 pos. maintained A029407 A029307•

2 pos. momentary A029408 A029308•

3 pos. maintained A029403 A029303

3 pos. momentary A029404 A029304

3 pos. mainL, momR A029405 A029305

3 pos. momL, mainR A029406 A029306

G-20 APEM www.apem.com

A02 series

Keylock switches

Panel cut-out Ø 22 or 29,5 x 21,5

(.827)

(2.520)(1.062)

(1.142)

(1.319)

64.0027.00

29.00

21.00

33.50

29.00x29.00

(1.142 SQ)

Ø29.00

(1.142 DIA)

33.50

(1.319) 21.00

(.827)

34.50

(1.358)

(1.496)

38.00

55.50

(2.185)

24.00

(.945)

36.00

(1.417)

A keyswitch assembly requires :

operator + one or two switch blocks.

To order these elements, select desired model numbers from tables below.

Example : IP65 square 2 position keyswitch, clockwise rotation, switch block with 2 N.O.

contacts = A028220 and A02503.

N.C.

N.O. N.O./N.C.

• Key Rotation - 2 position switches

The model numbers shown are for switches

with clockwise key rotation.

For anticlockwise rotation, replace:

20 with 01

19 with 02

at the end of the model number

• 2 standard keys are supplied.

• 20 key barrel types available.

Non-removable key positions : contact

APEM.

Operator Switch block

Bezel: rectangular, square, round,

Second switch block

To achieve 3 or 4 pole switching,

add second switch block, from

above table

Key positions

❷

OPTION

To specify flush mounting (Ø 30 mm) option,

add “FM” to the end of the part number (for

round operators only). Example : A028320FM.

Bezel Description Part No Key removable

in positions

2 pos. maintained A028120• A-B

2 pos. momentary A028119• A

3 pos. maintained A028105 A-B-C

3 pos. momentary A028106 A

3 pos. mainL, momR A028107 A-B

3 pos. momL, mainR A028108 A-C

2 pos. maintained A028220• A-B

2 pos. momentary A028219• A

3 pos. maintained A028205 A-B-C

3 pos. momentary A028206 A

3 pos. mainL, momR A028207 A-B

3 pos. momL, mainR A028208 A-C

2 pos. maintained A028320• A-B

2 pos. momentary A028319• A

3 pos. maintained A028305 A-B-C

3 pos. momentary A028306 A

3 pos. mainL, momR A028307 A-B

3 pos. momL, mainR A028308 A-C

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

APEM www.apem.com G-21

A02 series

Mushroom head pushbutton switches

Panel cut-out Ø 22 (.866)

• Prominent 40 mm (1.575) dia. mushroom actuator or optional 26 mm (1.024) actuator

• Momentary and maintained functions

Momentary function versions are unmarked

Maintained function versions are twist to release (arrows indicate direction of twist)

• Various coloured mushroom actuators are available

N.C.

N.O. N.O./N.C.

(.827)

(2.520)

(1.142)

64.00

29.00

21.00

(.827)

Ø40.00

(1.575 DIA)

Operator Switch block

❶❷

Bezel Description Part No

Black momentary A02MMA

Red momentary A02MMB

Yellow momentary A02MMD

Green momentary A02MME

Blue momentary A02MMF

Black maintained A02MXA

Red maintained A02MXB

Yellow maintained A02MXD

Green maintained A02MXE

Blue maintained A02MXF

Contacts Part No

1 N.O. A02501

1 N.C. A02502

2 N.O. A02503

2 N.C. A02504

1 N.O./1 N.C. A02505

Second switch block

Contacts Part No

1 N.O. A02506

1 N.C. A02507

2 N.O. A02508

2 N.C. A02509

1 N.O./1 N.C. A02510

To achieve 3 or 4 pole switching,

add second switch block, from

above table

OPTION

For optional reduced (Ø 26 mm) mushroom

head operators : contact APEM.

Bezel: round

G-22 APEM www.apem.com

A02 series

Industrial controls

Installation

Modular construction / panel mounting

PANEL CLAMP

END CAP

SWITCH BLOCK

ADAPTOR BLOCK

OPERATOR

FIXING

NUT

(.236 MAX)

6.00 Maxi

PANEL

SEAL

BULB

POLARISING

DOT

REFLECTOR

LEGEND

LOCATING

SLOT

SCREEN

FIXING SCREW

EMERGENCY

STOP

ROTARY

LEVERS SWITCHES

KEYLOCK

SWITCHES

PUSHBUTTONS & INDICATORS

PANEL CUT-OUT

Round & square operators

Rectangular operators

Max. panel thickness : 8 mm (.315)

PANEL MOUNTING ASSEMBLY

• Drill/punch hole in panel as shaped above.

• Assemble front operator through hole and :

a/ Round & square types : tighten nut to a maximum

torque of 0,8Nm using tool No 30-0001. Snap on

adaptor block

b/ Rectangular types : tighten two panel fixing screws in

front to a maximum torque of 0,06Nm.

• Wire chosen switch block as required and snap onto

front operator.

• Snap end cap onto switch block.

• Fit bulb if required using tool No 30-0002.

• Snap screen onto reflector assembly with legend in

between if required ans snap into front operator TAKING

CARE TO LINE UP THE LOCATING SLOT WITH THE

POLARISING DOT, and not to damage the seal.

TO REMOVE BULB

Remove reflector/screen assembly. Use the bulb extractor

30-0002 to remove the bulb.

TO REMOVE SWITCH BLOCK

Lever out latches using small screwdriver taking care not to

overbend, and pull off the block from the front operator.

CA02PE

Ech:0.35

14-03-96

(.511)

(.118)

13.00

3.00

0.00/+0.50

Ø22.00

(.866 DIA )

.000/+.019

(1.161 )

29.50 0.00/+0.50

(.846 )

21.50 0.00/+0.50

.000/+.019

CA02PE

Ech:0.35

14-03-96

(.511)

(.118)

13.00

3.00

0.00/+0.50

Ø22.00

(.866 DIA )

.000/+.019

(1.161 )

29.50 0.00/+0.50

(.846 )

21.50 0.00/+0.50

.000/+.019

A02 Accessories

Part No : 14-0005

End cap terminal guard offering unique terminal protection.

6.35 mm push on tab terminals.

Specify “SP” to the end of the switchblock and operator P/N.

Example : A02503SP.

APEM www.apem.com G-23

A03 series

Illuminated or non-illuminated pushbutton switches and indicators

Panel cut-out Ø 22 (.866) or 30 (1.181) - Plastic or metal flush mounting bezel

A pushbutton assembly requires :

screen + lamp (if illuminated) + operator + switch block.

To order these elements, select desired model numbers from tables below.

Example : IP65 flush mounting round pushbutton, maintained function, red screen, 12V red LED

and single pole switch block = A0314X, A0263B, A0142M1 and A0151B.

Ø29.00

(1.143 DIA)

10.00

(.394)

26.00

(1.024)

49.00

(1.931)

59.00

(2.325)

6.00

(.236)

6.00

(.236)

7.65

(.301)

18.00

(.709)

18.00

(.709)

0.50

Ø35.00

(1.379 DIA)

2.00

(.079)

59.50

(2.344)

1.0 to 6.0

Panel Thickness

Screen Lamp Operator Switch block

❶❷❸❹

Bezel Colour Part No

black A0263A

red A0263B

amber A0263C

yellow A0263D

green A0263E

blue A0263F

clear A0263G

white A0263J

Lamp Voltage Part No

Filament 6.3V A0141A

Filament 14V A0141B

Filament 28V A0141C

Filament 36V A0141D

Filament 48V A0141E

Filament 60V A0141F

Neon 110V A0143G

Neon 220V A0143H

LED 6V red A0142L1

LED 6V green A0142L2

LED 6V amber A0142L3

LED 12V red A0142M1

LED 12V green A0142M2

LED 12V amber A0142M3

LED 12V blue A0142M4

LED 12V white A0142M5

LED 24V red A0142N1

LED 24V green A0142N2

LED 24V amber A0142N3

LED 24V blue A0142N4

LED 24V white A0142N5

LED 48V red A0142P1

LED 48V green A0142P2

LED 48V amber A0142P3

No of poles Part No

Single pole A0151B

Double pole A0152B

Three pole A0155B

Four pole A0153B

Bezel Description Lamp type Part No

Plastic illum, momentary Lamp/LED bulb A0307Y

Plastic illum, maintained Lamp/LED bulb A0307X

Plastic non-illum, momentary A0309Y

Plastic non-illum, maintained A0309X

Metal illum, momentary Lamp/LED bulb A0310Y

Metal illum, maintained Lamp/LED bulb A0310X

Metal non-illum, momentary A0312Y

Metal non-illum, maintained A0312X

F/mount illum, momentary Lamp/LED bulb A0314Y

F/mount illum, maintained Lamp/LED bulb A0314X

F/mount non-illum, momentary A0315Y

F/mount non-illum, maintained A0315X

Plastic indicator A0375

Metal indicator A0377

F/mount indicator A03791

UNSEALED SWITCHES (IP40) :

add “01” to end of operator model number.

SCREEN ENGRAVING / INSERTABLE LEGENDS : contact APEM.

Bezel: round. ‘Illum’ - illuminated, ‘Non-illum’ - non illuminated

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 Apem:   
  A0141A  A01FM1  A01YL1  A0152B  A0150B  A0151B  A0154B  A0155B  A0153B  A0143G  A0141C  A0172  A0171
  A01ES  A02503  A0162B  A0162J  A0162F  A0162C  A0162E  A0101Y  A0101X  A0263B  A0244J1  A0142N1 
A0142N5  A0142M1  A01PEESSP34L  A0210X  A0211X  A0161E  A0161B  A01ESSP3  A018323  A1PCA1Y220J403
  A01FM2  A0102X  A0102Y  A0104Y  A0106X  A0106Y  A0107X  A0107Y  A0108X  A0108Y  A0109Y  A0111X 
A0111Y  A0112X  A0112Y  A0141B  A0141D  A0141E  A0141F  A0142L1  A0142L2  A0142L3  A0142M2  A0142M3 
A0142M4  A0142M5  A0142N2  A0142N3  A0142N4  A0142P1  A0142P2  A0143H  A0161A  A0161C  A0161D 
A0161F  A0161G  A0161J  A0162A  A0162D  A0162G  A0163A  A0163B  A0163C  A0163D  A0163E  A0163F 
A0163G  A0163J  A0173  A018107  A019105  A019205  A019301  A019306  A019501  A019505  A019506  A019508 
A019601  A019605  A019606  A01FG1  A01FG2  A01FM