CUSTOMER DRAWING
TITLE: SEALING CAPS
Unless otherwise specified dimensions are in
millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
DOCUMENT NO.: D-436-0184/-0186
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV: D DATE:
September 20, 2011
PREPARED BY:
UNGUYEN CAGE CODE:
06090 ECO NUMBER:
ECO-11-019172 SCALE: NTS SIZE:
A SHEET: 1 of 1
© 1998-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Note A: This end of sleeve may have a 1.20mm (0.50) opening as received. Upon heating, sealing material will flow
sufficiently to close end.
Note B: D-436-0186 has a blue color code dot
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SEALING LINER: Fluorocarbon-based thermoplastic. Color: clear.
APPLICATION
1. These parts are designed for use with Raychem parallel crimp splices to make environment-resistant stub splices in two wires
having a combined insulation diameter less than the “as received” I.D. of the sleeve, and rated for at least +125C.
2. Temperature range: -55C to +150C.
Parts may be installed by convection heating.
I.D. of Liner Insulation Sleeve Product Dimensions
Product
Name Received
Min Recovered
Max Weight
Grams
Max
Recovered
I.D.
Max
Recovered
Wall
Min
L
max E
min
D-436-0184 2.15
(0.085) 0.0
(0.00) 0.3 1.37
(0.055) 0.30
(0.012) 21.3
(0.840) 13.0
(0.510)
D-436-0185 4.8
(0.188) 0.0
(0.00) 0.5 2.41
(0.095) 0.33
(0.013) 21.7
(0.855) 13.0
(0.510)
D-436-0186
(Note B) 3.05
(0.120) 0.0
(0.00) 0.4 1.37
(0.055) 0.30
(0.012) 21.3
(0.8.40) 15.25
(0.600)
