MCS7780 USB to IrDa Port Features Applications * Single 3.3V - 5.0V operation * Low power * Full compliance with the USB V1.1 specification and IrDa 1.3 * IrDa data rates from 2.4Kbps to 4 Mbps * Uses standard IrDa Transceivers * Microsoft compatible * Internal power-on reset * On-chip oscillator * Available in 28-pin SSOP package * High-speed IrDa Communications * Cell phone interface cable General Description Ordering Information The MCS7780 controller provides bridging between the Universal Serial Bus (USB) input and an IrDa wireless data communication port. This device contains all the necessary logic to communicate with the host computer via the USB bus. In addition, the MCS7780 contains a 3.3V regulator and operates in bus-powered mode. The MCS7780 has a reduced frequency (12MHz) crystal oscillator. This combination of features allows significant cost savings in system design along with straight forward implementation of IrDa port functionality into PC peripherals using the host's USB port. Page 2-16 Application Note * AN-7780 Evaluation Board * MCS7780-EVB Commercial Grade ( 0 C to +70 C ) MCS7780CS MCS7780CS-GR 28-SSOP 28-SSOP Standard RoHS MCS7780 USB to IrDa Port MCS7780 Pin assignment 1 28 N.C. TXDIODE 2 27 N.C. N.C. 3 26 XTAL2 N.C. 4 25 XTAL1 RXFAST 5 24 DGND TX 6 RXSLOW 7 SD/MODE 8 DGND 9 3.3V 10 AGND 11 MCS7780CS TXDIODEG 23 nRESET 22 N.C. 21 N.C. 20 N.C. 19 N.C. 18 3.3VA DM 12 17 DP N.C. 13 16 N.C. N.C. 14 15 N.C. Page 2-17