www.osram-os.com Produktdatenblatt | Version 1.1 SFH 4546 SFH 4546 Radial T1 3/4 High Power Infrared Emitter (940 nm) Applications ----Electronic Equipment ----Safety systems and CCTV ----Industrial Automation (Machine controls, Light barriers, Vision controls) ----Smoke Detectors Features: ----Package: black epoxy ----ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ----High Power Infrared LED ----Short switching times Ordering Information Type Radiant intensity 1) IF = 100 mA; tp = 20 ms Ie SFH 4546 SFH 4546-AWBW 1 Version 1.4 | 2018-06-21 Radiant intensity 1) typ. IF = 100 mA; tp = 20 ms Ie Ordering Code 63 ... 320 mW/sr 130 mW/sr Q65110A8096 100 ... 320 mW/sr 130 mW/sr Q65110A9615 SFH 4546 Maximum Ratings TA = 25 C Parameter Symbol Operating temperature Top min. max. -40 C 100 C Storage temperature Tstg min. max. -40 C 100 C Reverse voltage 2) VR max. 12 V Forward current IF max. 100 mA Surge current tp 100 s; D = 0 IFSM max. 1A Power consumption Ptot max. 180 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.4 | 2018-06-21 Values SFH 4546 Characteristics IF = 100 mA; tp = 20 ms; TA = 25 C Parameter Symbol Peak wavelength peak typ. 950 nm Centroid wavelength centroid typ. 940 nm Spectral bandwidth at 50% Irel,max typ. 42 nm Half angle typ. 20 Dimensions of active chip area LxW typ. 0.3 x 0.3 mm x mm Rise time (10% / 90%) IF = 100 mA; RL = 50 tr typ. 12 ns Fall time (10% / 90%) IF = 100 mA; RL = 50 tf typ. 12 ns Forward voltage VF typ. max. 1.5 V 1.8 V Forward voltage IF = 1 A; tp = 100 s VF typ. max. 2.3 V 3V Reverse current 2) VR = 5 V IR max. typ. 10 A 0.01 A Total radiant flux 3) e typ. 55 mW Radiant intensity 1) IF = 1 A; tp = 25 s Ie typ. 1000 mW/sr Temperature coefficient of brightness TCI typ. -0.5 % / K Temperature coefficient of voltage TCV typ. -1.3 mV / K TC typ. 0.3 nm / K RthJA max. 450 K / W Temperature coefficient of wavelength Thermal resistance junction ambient real 3 Version 1.4 | 2018-06-21 4) Values SFH 4546 Brightness Groups TA = 25 C Group V Radiant intensity IF = 100 mA; tp = 20 ms min. Ie Radiant intensity IF = 100 mA; tp = 20 ms max. Ie 63 mW/sr 125 mW/sr AW 100 mW/sr 200 mW/sr BW 160 mW/sr 320 mW/sr Only one group in one packing unit (variation lower 2:1). Relative Spectral Emission 5), 6) Irel = f (); IF = 100 mA; tp = 20 ms OHF04134 100 I rel % 80 60 40 20 0 800 850 900 950 nm 1025 4 Version 1.4 | 2018-06-21 SFH 4546 Radiation Characteristics 5), 6) Irel = f () 40 30 20 10 0 OHL03921 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 Forward current 0.8 0.6 0 20 60 80 100 120 5), 6) Ie/Ie(100mA) = f (IF); single pulse; tp = 25 s OHF03822 100 A OHF03821 101 Ie I e (100 mA) 10-1 5 100 5 10-2 10-1 5 5 10-3 10-2 5 5 10-4 40 Relative Radiant Intensity 5), 6) IF = f (VF); single pulse; tp = 100 s IF 0.4 0 0.5 1 1.5 2 V 2.5 VF 5 Version 1.4 | 2018-06-21 10-3 0 10 5 10 1 5 10 2 mA 10 3 IF SFH 4546 Max. Permissible Forward Current Permissible Pulse Handling Capability IF,max = f (TA); RthJA = 450 K / W IF = f (tp); duty cycle D = parameter; TA = 25C OHR00880 125 IF F mA 1.2 A 1.0 100 75 0.6 50 0.4 25 0 20 40 60 80 C 100 T IF = f (tp); duty cycle D = parameter; TA = 85C OHF05587 t D = TP 0.7 0.6 0.5 0.4 0.3 0.2 IF T 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.2 Permissible Pulse Handling Capability 0.9 A IF 0.8 t D = TP D= 0.8 0 OHF05438 tP tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 6 Version 1.4 | 2018-06-21 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp SFH 4546 Dimensional Drawing 7) Approximate Weight: 298.0 mg Package marking: Cathode 7 Version 1.4 | 2018-06-21 SFH 4546 Recommended Solder Pad Pad 1: cathode 8 Version 1.4 | 2018-06-21 7) SFH 4546 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.4 | 2018-06-21 SFH 4546 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Packing information is available on the internet (online product catalog). For further application related informations please visit www.osram-os.com/appnotes 10 Version 1.4 | 2018-06-21 SFH 4546 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the OSRAM OS Webside. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer - or Customer supplied by Buyer- considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.4 | 2018-06-21 SFH 4546 Glossary 1) Radiant intensity: Measured at a solid angle of = 0.01 sr 2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Total radiant flux: Measured with integrating sphere. 4) Thermal resistance: junction ambient, mounted on PCboard (FR4), padsize 16 mm each 5) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Testing temperature: TA = 25C 7) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 12 Version 1.4 | 2018-06-21 SFH 4546 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 13 Version 1.4 | 2018-06-21