THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 162
HMC535LP4 / 535LP4E
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
v01.1009
General Description
Features
Functional Diagram
The HMC535LP4 & HMC535LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC PLOs.
The PLO’s phase noise performance is excellent
over temperature, shock, and process due to the
oscillator’s monolithic structure. Power output is
+9 dBm typical from a +5V supply voltage. All fun-
ctions (VCO, Op-Amp, PFD, Prescaler) are fully
integrated while providing allowances for off-chip
customer speci c loop components. The PLO MMIC
accepts a single-ended or a differential reference
oscillator input signal in the range of 230 to 240 MHz,
and a digital Lock Detector (LD) output is provided
to con rm the status of the loop. The phase-locked
oscillator is packaged in a leadless QFN 4 x 4 mm
surface mount package.
Pout: +9 dBm
Phase Noise: -110 dBc/Hz @100 KHz Typ.
Single Supply: +5V @ 340 mA
+12V @ 28 mA
24 Lead 4x4mm QFN Package: 9 mm
Typical Applications
Phase-Locked Oscillator for:
• VSAT Radio
• Point-to-Point & Point-to-Multi-Point Radio
• Test Equipment & Industrial Controls
• Military End-Use
Electrical Speci cations, TA = +25° C
Parameter Min. Typ. Max. Units
Power Supplies:
VCO Voltage
VCO Current
Op-Amp Voltage
Op-Amp Current
Digital Voltage
Digital Current
Vcc1
Icc1
Vcc2
Icc2
Vcc3
Icc3
—
—
—
—
—
—
5
172
12
28
5
168
—
—
—
—
—
—
V
mA
V
mA
V
mA
PLO Characteristics:
RF Operating Freq.
RF Power
Reference Input Freq.
Reference Input Power
RF Phase Noise
Locking Time
Lock Detect Output
Locked
Unlocked
100 KHz offset
Loop BW = 1 MHz
14.7
6
229.69
0
—
—
—
0.7
—
9
—
5
-110
20
0.3
1.0
15.4
—
240.62
10
—
—
0.5
—
GHz
dBm
MHz
dBm
dBc/Hz
µs
Vave
Vave
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 163
Parameter Min. Typ. Max. Units
VCO Characteristics:
RF Operating Freq.
RF Power
RF Tuning Sensitivity
Tuning Voltage Leakage Current
RF Phase Noise
RF Harmonics
RF Pushing
RF Pulling
RF Drift Rate
3 dB Modulator Bandwidth
Vtune +2 to +9.5 V
Vtune 0 to +2 V
Vtune +9.5 to +12 V
Vtune +2 to +9.5 V
100 kHz offset
1/2 FOP
3/2 FOP
4/2 FOP
5/2 FOP
VSWR 2:1 any phase
VTVCO input
14.7
6
—
—
50
—
—
—
—
—
—
—
—
—
30
—
9
160
—
—
—
-108
—
—
—
—
—
—
—
—
15.4
—
—
590
—
25
—
-20
-35
-8
-25
-125
10
20
—
GHz
dBm
MHz/V
MHz/V
MHz/V
µA
dBc/Hz
dBc
dBc
dBc
dBc
MHz/V
MHz
MHz/ °C
MHz
Phase Frequency Detector:
REF Input Capacitance
REF Input Resistance
REF Input VSWR
Output High Voltage
Output Low Voltage
Phase Noise
Referenced to 50 Ohms
—
—
—
—
Vcc3 -1.9
—
—
50
—
Vcc3
Vcc3 -1.95
-150
10
—
2:1
—
Vcc3 -2
—
pF
Ohm
V
V
dBc/Hz
Op-Amp Characteristics:
Input Offset Voltage
Input bias Current
Large-Signal Voltage Gain
Common Mode Rejection Ratio
Input Common Mode Range
Power Supply Rejection Ratio
Output Voltage Swing Low
Output Voltage Swing High
Gain Bandwidth Product
Slew Rate
Phase Margin
Input Voltage Noise
VCM = 2.5V, 5.2V
VCM = 2.5V, 5.2V
Open Loop, No Load
VCM = 2.5V
Frequency = 1 MHz
VCM = 2.5V
Frequency = 1 MHz
No Load,
ISINK = 5 mA
No Load
ISOURCE = 5 mA
Frequency = 6 MHz
AV = 10, No Load
VO = 10V
Open Loop
Frequency = 10 kHz
—
—
—
—
2.5
—
—
—
10
10
—
—
—
—
1
5
69
104
—
63
0.8
0.81
10.5
10.2
400
146
110
1.6
—
—
—
—
5.2
—
1.2
1.2
—
—
—
—
—
—
mV
µA
dB
dB
V
dB
V
V
V
V
MHz
V/µs
Deg
nV / sqrt (Hz)
Prescaler (Divider) Characteristics:
Prescaler Division
Phase Noise
—
—
64
-156
—
—dBc/Hz
Electrical Speci cations, (Continued)
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 164
Frequency vs. Tuning Voltage, T = 25°C Frequency vs. Tuning Voltage, Vcc1 = +5V
13.8
14.3
14.8
15.3
15.8
024681012
Vcc= 4.75V
Vcc= 5.00V
Vcc= 5.25V
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (VOLTS)
13.8
14.3
14.8
15.3
15.8
024681012
+25 C
+85 C
-40 C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (VOLTS)
VCO Performance Plots
15 GHz Locked RF Signal
BW = 1 MHz, Ref. Frequency = 234 MHz
Reference Spurs @ 15 GHz
BW = 1 MHz, Ref. Frequency = 234 MHz
PLO Performance Plots
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
10
14.7 14.8 14.9 15 15.1 15.2 15.3
OUTPUT POWER (dB)
FREQUENCY (GHz)
234 MHz
Center = 15 GHz
Span = 600 MHz
Res. Bandwidth = 100 kHz
Video Bandwidth = 1 kHz -75 dBc
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
10
14.975 14.985 14.995 15.005 15.015 15.025
OUTPUT POWER (dB)
FREQUENCY (GHz)
Center = 15 GHz
Span = 50 MHz
Res. Bandwidth = 300 kHz
Video Bandwidth = 300 kHz
-170
-150
-130
-110
-90
-70
-50
-30
-10
102103104105106107108
+25 C
+85 C
-40 C
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
Fref. = 234 MHz
RF = 15 GHz
Pref. = 5 dBm
Phase Noise Performance
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 165
Output Power
vs. Tuning Voltage, Vcc1 = +5V
SSB Phase Noise @ Vtune = +5VSSB Phase Noise vs. Tuning Voltage
Sensitivity vs. Tuning Voltage, Vcc1 = +5V
0
3
6
9
12
15
024681012
+25 C
+85 C
-40 C
OUTPUT POWER (dBm)
TUNING VOLTAGE (VOLTS)
0
100
200
300
400
500
600
024681012
+25 C
+85 C
-40 C
SENSITIVITY (MHz/VOLT)
TUNING VOLTAGE (VOLTS)
-160
-140
-120
-100
-80
-60
-40
-20
0
103104105106107
+25 C
+85 C
-40 C
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-120
-110
-100
-90
-80
-70
-60
1357911
10 kHz offset
100 kHz offset
SSB PHASE NOISE (dBc/Hz)
TUNING VOLTAGE (VOLTS)
Phase-Frequency Detector Performance Plots
SSB Phase Noise Performance
Pin = 0 dBm, T = 25°C
Error Voltage vs. Temperature
Pin = 0 dBm, Fin = 235 MHz
-1.2
-0.8
-0.4
0
0.4
0.8
1.2
-p -p/2 0 p/2 p
+25 C
+85 C
-40 C
ERROR VOLTAGE (Vdc)
PHASE DIFFERENCE (rad)
-180
-160
-140
-120
-100
-80
-60
-40
-20
0
102103104105106
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
VCO Performance Plots (continued)
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 166
Absolute Maximum Ratings
Outline Drawing
Vcc1 +5.5 Vdc
Vcc2 +13 Vdc
Vcc3 +5.5 Vdc
Reference Input Power +13 dBm
Vtune 0 to +13V
Channel Temperature 135 °C
Continuous Pdiss (T = 85°C)
(derate 47 mW/°C above 85°C) 2.35 W
Storage Temperature -55 to +125 °C
Operating Temperature -40 to +85 °C
Typical Supply Currents vs.
Voltages @ 15 GHz Output
Vcc1 (V) Icc1 (mA)
4.75 156
5.0 172
5.25 185
Vcc2 (V) Icc2 (mA)
11.5 26
12 28
12.5 30
Vcc3 (V) Icc3 (mA)
4.75 158
5168
5.25 180
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC535LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H535
XXXX
HMC535LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H535
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 167
Pin Number Function Description Interface Schematic
1-3, 5, 6,
21-24 N/C No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4 Vtune VCO control voltage input.
7, 9 GND This pin must be connected to RF / DC ground.
8 RFOUT RF output (AC coupled).
10 Vcc1 VCO Supply Voltage, +5V.
11 OP-AMP OUT Op-Amp output voltage.
12 Vcc2 Op-amp Supply Voltage, +12V.
13 IN- Op-amp negative input voltage.
14 IN+ Op-amp positive input voltage.
Pin Descriptions
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 168
Pin Number Function Description Interface Schematic
15 REF PFD reference input.
(This pin must be DC blocked externally)
16 NREF PFD reference input compliment.
(This pin must be DC blocked externally)
17 NU PFD not up output.
18 ND PFD not down output.
19 LD PFD lock detector output.
20 Vcc3 Digital circuitry supply voltage, +5V.
Package
Base GND Package bottom has an exposed metal paddle that
must be connected to RF / DC ground.
Pin Descriptions (Continued)
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 169
Application Circuit
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 170
Evaluation PCB
The circuit board used in the nal application should use RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads and backside ground paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top
and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation
circuit board shown is available from Hittite upon request.
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
PLOS - SMT
12
12 - 171
List of Materials for Evaluation PCB 109293 [1]
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 DC Pin
C1, C4, C14, C16 4.7 µF Tantalum Capacitor
C2, C3, C5, C15 1,000 pF Capacitor, 0603 Pkg.
C6, C11 0.01 µF Capacitor, 0402 Pkg.
C7, C8 33 pF Capacitor, 0402 Pkg.
C9, C10 0.01 µF Capacitor, 0603 Pkg.
C12 18 pF Capacitor, 0402 Pkg.
C13 0.1 µF Capacitor, 0402 Pkg.
C17 22 pF Capacitor, 0402 Pkg.
R1, R4 432 Ohm Resistor, 0402 Pkg.
R2, R3 4.02 k Ohm Resistor, 0402 Pkg.
R5, R6 232 Ohm Resistor, 0402 Pkg.
R7, R9 1k Ohm Resistor, 0402 Pkg.
R8 620 Ohm Resistor, 0402 Pkg.
R10 0 Ohm Resistor, 0402 Pkg.
R11 4.42 k Ohm Resistor, 0402 Pkg.
R12 549 Ohm Resistor, 0402 Pkg.
R13 10 k Ohm Resistor, 0402 Pkg.
R14 51 k Ohm Resistor, 0402 Pkg.
R15 634 Ohm Resistor, 0402 Pkg.
D1 Green LED, 0603 Pkg.
Q1 MMBT3904, SOT26 Pkg.
U1 HMC535LP4 / HMC535LP4E PLO
U2 LM2903MX
PCB [2] 109291 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC535LP4 / 535LP4E
v01.1009
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
