tyco Specification Electronics Control Drawing Raychem a) Part as supplied. 202K1**12-01 t 4 H DIA - - - + J DIA a b) Part after unrestricted recovery. |- Pp a a RR JW H DIA - - - Th J DIA +S JO e_ 2.0mm DIA HOLE (See note 2 regarding eyelet feature) c a DIMENSIONS in millimetres {in inches, for reference} H J P R 5 T U JO HW JW Part No. Min Max Min Max = 10% -10% = 410% 410% 410% = 410% = 420% = 420% Q b Q b b b b b b b b b 24 10.4 12 5.6 26 3 3.0 1.0 8.5 1.6 0.5 202K 121-12-01 {0.94} {0.41} {0.47} {0.22} {1.02} {0.35} {0.12} {0.04} @ {0.33} {0. 06} {0.02} 202K132-12-01 30 14.2 14 5.9 43 20 3.0 1.0 11.5 1.8 1.0 1.18) {0.56) (0.55) (0.23) 1.69) (0.79) {0.12} {0.04) (0.45) {0.07} {0.04) 202K142-12-01 31 18.0 15 7.1 47 15 3.0 1.0 @ 17.0 1.8 1.0 (1,22) {0.71} (0.59) (0.28) (1.85) (0.59) {0.12} 0.04) (0.67) {0.07} {0.04} 36 22.4 18 8.4 60 22 3.0 1.0 @ 19.5 2.0 1.0 202KT53-12-01 449) (0.88) (0.71) (0.33) 12.36) (0.87) (0.12) (0.04) (0.77) (0.08) (0.04) 42 28.2 21 3.9 73 41 3.0 1.7 20 21.0 2.2 1.0 202K 1683-12-01 (1.65) {1.11} {0.83) {0.39} {3.11} (1.61 (0.12) (0.07) {0.79} {0.83} {0.09} (0.04) 60 35.1 35 15.7 110 52 3.0 1.7 20 39.0 3.2 1.5 202K174-12-01 in 3g) 7,38) 17.38) (0.62) (4.33) 2.05) (0.12) (0.07) 10.79) (1.54) (0.13) (0. 08) 49 66 44.5 38 16.8 150 70 3.0 2.0 20 51.5 3.8 2.0 202K185- 12-01 {2,60} {1. 75) {1.50} {0.66} {5.91} {2, 76} {0.12} {0. 08} {0.79} {2.03} {O. 15) {0. 08} # # This is a trimmed variant Modified dimensions are shown thus:- # Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 3 Date September 2006Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale mo Design MKTG. Q.A. Page 1 of 2 202K1XX-12-01 Part Number Specification Raychem Control Drawing ZO2ZK1**-12O1 _ Issue 3 E.C.R. No. Iss. Date Details of Change 2 |September 2001] CRO1-HM-0018| R dimension changed 3 |September 2006] CROG-HM-011 Eyelet note added to page 17 3 |September 2006| CRO&-DM-104 Material description name changed (Ordering Information) 202K 1 k 1 2-0] /X*-O | saneeive Slash Number Cif required see compatibility chart) Modification number Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number| Material Description SPEC Number Coating Slash Number NOTES GQ) Dimension U does not apply on sizes 202K121 thru 202K153. @) Part is supplied without eyelet feature as standard If eyelet feature is required, add C5-1863 to description:- 202K 132-12-01-CS-1836-0 If eyelet feature and clip is required, add C5-1858 to description:- 202K 132-12-01-CS-1858-0 GB) As suppLied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 934025 EngLand USA Telephone: (01793) 328171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code KI010 Cage Code 060390 Page 2 of 2