BURNDY Grounding TYPE YGHA HYLUGTM Heavy Duty Irreversible Compression Terminals Heavy duty HYLUGTM irreversible compression terminals designed not only to carry short circuit load, but to also withstand high mechanical stress. Each conductor element has an inspection probe hole to insure proper cable insertion. UL467 Listed. Acceptable for direct burial in earth or concrete. UL486A D-14 Listed. Prefilled with PENETROXTM compound and strip sealed. CATALOG NUMBER YGHA2C-2N YGHA25-2N YGHA26-2N YGHA27-2N YGHA28-2N YGHA29-2N YGHA31-2N YGHA34-2N MEETS ALL IEEE 837 REQUIREMENTS COPPER CONDUCTOR SIZE INSTALLATION TOOLS, DIE SET CAT. NO., AND (NUMBER OF CRIMPS) HYPRESSTM Y35/Y39/Y45 /Y46 /Y750 B C L T 2 str. 1/0 str. 2/0 str. 3/0 str. 4/0 str. 250 kcmil 350 kcmil 500 kcmil U1CRT (1) U27RT (1) U28RT (1) U29RT (1) U30RT (2) U31RT (2) U34RT (2) U36RT (3) .75 .83 .83 1.18 1.18 1.18 1.18 1.48 .97 .91 .97 1.08 1.22 1.28 1.62 1.72 4.21 4.60 4.38 4.94 4.94 4.94 5.00 5.42 .26 .19 .26 .29 .30 .34 .43 .40 Where a "U" or "PU" die is recommended with the Y45 HYPRESSTM, a PT6515 adapter must be used. Where a "U" or "PU" die is recommended with the Y46 HYPRESSTM, a PUADP-1 adapter must be used. TYPE YGHS HYLINKTM Heavy Duty Irreversible Compression Terminals Heavy duty HYLINKTM ground splice designed not only to carry short circuit load, but to also withstand high mechanical stress. Each conductor element has an inspection probe hole and a center stop to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial in earth or concrete. UL486A Listed. Prefilled with PENETROXTM compound and strip sealed. CATALOG NUMBER YGHS2C YGHS25 YGHS26 YGHS27 YGHS28 YGHS29 YGHS31 YGHS34 KNURLED RINGS INSPECTION PROBE HOLES FOR CABLE STOP MEETS ALL IEEE 837 REQUIREMENTS COPPER CONDUCTOR SIZE INSTALLATION TOOLS, DIE SET CAT. NO., AND (NUMBER OF CRIMPS) HYPRESSTM Y35/Y39/Y45 /Y46 /Y750 B L 2 str. 1/0 str. 2/0 str. 3/0 str. 4/0 str. 250 kcmil 350 kcmil 500 kcmil U1CRT (1) U27RT (1) U28RT (1) U29RT (1) U30RT (2) U31RT (2) U34RT (2) U36RT (3) .75 .83 .83 1.18 1.18 1.18 1.18 1.48 1.73 1.89 1.89 2.59 2.59 2.59 2.59 3.19 Where a "U" or "PU" die is recommended with the Y45 HYPRESSTM, a PT6515 adapter must be used. Where a "U" or "PU" die is recommended with the Y46 HYPRESSTM, a PUADP-1 adapter must be used.