PB6B2FM2M1CAL07 - TE CONNECTIVITY

Sealed Pushbutton Switches

Document #: 0-2329328-1

Version Date: 03-2018

Dimensions in

millimetres (inches)

unless otherwise

specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

Key Features

• IP68 Rated

(1Meter, 60

Minutes)

• Normally Open

and Normally

Closed Versions

• Various Cap

Options

• LED illuminated

flat cap versions

• Various cap and

color

illuminations

• Leaded options

for ease of

installation

• LED illumination

technology for

long-term

reliability

IP68 Sub-Miniature Pushbutton Switches

TE Connectivity’s Sub-Miniature Pushbutton range is a portfolio of high

quality,IP68 rated switches that comprises various cap styles and LED

illumination options.

These Pushbutton Switches are offered in High Cap, Round Cap, Flat Cap, and

LED Flat Cap actuators. For ease of installation without the need of soldering,

they are also available with 500mm leaded options.

As they are available in 5 different cap colors, including black, Red, Yellow,

Green, and Blue as well as multi-color LED options for the flat cap, these

switches can be used in a wide variety of applications.

Applications

• Industrial Equipment

• Instrumentation

• Communication Equipment

• Control Equipment

NO.

POLES

MODEL

NO.

SWITCH FUNCTION

SCHEMATIC

POS. 1

POS. 2

POS. 1

POS. 2

SP

PB6

OFF

MOM(ON)

OPEN

CLOSE

SP

PB7

ON

MOM(OFF)

CLOSE

OPEN

MOM = MOMENTARY

Switch Function / Schematic

Benefits

• Ease of installation with

available solderable or

500mm leaded terminations

• Various colored caps for easy

visibility

Sealed Pushbutton Switches

Document #: 0-2329328-1

Version Date: 03-2018

Dimensions in

millimetres (inches)

unless otherwise

specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

MAX. CURRENT/VOLTAGE

RATING WITH RESISTIVE

LOAD:

400 mA 32 VAC – 200 mA 50 VDC – 125 mA 125 VAC

INITIAL CONTACT

RESISTANCE:

Without leads: 50mΩmax.

Leaded: 100mΩmax. * Resistance of the wire not included

INSULATION RESISTANCE:

1GΩmin.at 500 VDC

DIELECTRIC STRENGTH:

1,500 VAC RMS

ELECTRICAL LIFE AT FULL

LOAD:

500,000 cycles

OPERATING

TEMPERATURE:

-30°C to 85°C

PANEL THICKNESS:

1.5 (.059) to 4 (.157)

TOTAL TRAVEL:

1.5 (.059)

OPERATING FORCE:

3 to 6N

CONTACT BOUNCE:

10 ms.

MECHANICAL LIFE:

1,000,000 cycles

TORQUE:

0.5 Nm max. applied to nut

DEGREE OF PROTECTION:

IP68

MANUAL SOLDERING:

Use soldering iron of 30 watts, controlled at 350°C

approximately 5 seconds while applying solder

WAVE SOLDERING:

Recommended Soldering Temperature:260 + 5°C

*Ambient temperature of the soldered surface

of PC board. 110°C Max.

Duration of solder Immersion: Max 5 sec (PCB is 1.6mm)

Materials

CAP: Polyamide 6/6

PLUNGER: PB6:PC / PB7: Polyamide 6/6

RUBBER: Silicone

BUSHING: POLYAMIDE 6/6

CASE: Diallyl phthalate (DAP)(UL94V-0)

TERMINAL/CONTACT: Copper Alloy, Gold over

Silver plated

Lock Washer

M12 Nut

O-Ring

Specifications

Hardware

Ø13.50

(ø.532)

1.20

(.047)

Ø15.90

(ø.625)

1.0 THK

(.039)

16.00

(.630)

2.50

(.098)

14.00

(.551)

Sealed Pushbutton Switches

Document #: 0-2329328-1

Version Date: 03-2018

Dimensions in

millimetres (inches)

unless otherwise

specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

Bushing Type

Cap Options

Termination Options

B2

Flat

Round without LED

High without LED

M1 Solder Lug (PB6)

M1 Solder Lug (PB7)

M1 Solder Lug (PB6, with LED)

M2 Solder Lug (PB6)

M3 Solder Lug (PB6)

M4 PC Thru-hole (PB6)

7.30

(.287)

Ø 17.50

(.689)

5.00

(.197)

1.20

(.047)

10.70

(.421)

Ø 13.60

(.534

+0.00

-0.10

+.000

-.004

12.90

(.508

+0.05

-0.03

+.002

-.001

Ø 12.00

(.472)

2.0

(.078)

Ø 12.00

(.472)

Ø 12.00

(.472)

4.7

(.185)

2.80

(.110)

3.50

(.138)

0.40

(.016)

5.08

(.200)

3.40

(.134)

2.80

(.110)

5.08

(.200)

0.40

(.016)

3.40

(.134)

0.40

(.016)

5.00

(.197)

2.80

(.110)

0.50

(.020)

0.20

(.008)

0.40

(.016)

5.08

(.200)

5.50

(.217)

2.80

(.110)

5.08

(.200)

0.40

(.016)

8.20

(.323)

2.80

(.110)

5.08

(.200)

0.40

(.016)

3.50

(.138)

1.00

(.039)

5.08

(.200)

0.40

(.016)

2.59

(.102)

)

Panel Cut-Out

THICKNESS 1.5 to 4.0mm

Sealed Pushbutton Switches

Document #: 0-2329328-1

Version Date: 03-2018

Dimensions in

millimetres (inches)

unless otherwise

specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

Wire Option

S500 500mm Lead

Y500 500mm Lead with Heat Shrink

Code

DIM “L”

S500

500+10 (19.7 + .394)

Y100

500+10 (19.7 + .394)

Wire Length

12.70

(.500)

Ø 10.50

(.413)

10.0

(.394)

Ø 17.50

(.689)

5.00

(.197)

5.08

(.200)

0.40

(.016)

10.70

(.421)

2.0

(.078)

Ø 12.00

(.472)

1.20

(.047)

2.80

(.110)

3.50

(.138)

12.90

(.508)

Ø 17.50

(.689)

Ø 12.00

(.472)

1.20

(.047)

2.0

(.078)

13.40

(.527)

5.00

(.197)

3.40

(.134)

2.80

(.110)

5.08

(.200)

0.40

(.016)

10.70

(.421)

Ø 17.50

(.689)

Ø 12.00

(.472)

1.20

(.047)

2.0

(.078)

5.00

(.197)

15.10

(.595)

3.40

(.134)

0.40

(.016)

5.00

(.197)

5.08

(.200)

0.40

(.016)

10.70

(.421)

.

WIRE LENGTH

Code

DIM ''L"

S500

500+10 (19.7+ .394)

Y500

500+10 (19.7+ .394)

NON - LED

DESCRIPTION

WIRE COLOR

TERMINAL 1

BLACK

TERMINAL 2

BLACK

WITH LED

DESCRIPTION

WIRE COLOR

TERMINAL 1

BLACK

TERMINAL 2

BLACK

LED+

RED

LED-

GREEN

*Multi-wire lead AWG20, section 0.6mm , UL approved

0.50

(.020)

2.80

(.110)

PB6 M1

PB7 M1

PB6 M1 with LED

Sealed Pushbutton Switches

Document #: 0-2329328-1

Version Date: 03-2018

Dimensions in

millimetres (inches)

unless otherwise

specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

How To Order

Wire

Model NO.

Bushing

Cap Shape

Cap

Color

LED Color

Termination

Contact

Material

Seal

Model NO.

PB6 OFF-MOM (ON)

PB7 ON -MON(OFF)

Bushing

B2 Threaded bushing

Cap Shape & Appearance

FM Flat Cap Matte (with and without LED)

RS Round Cap Shiny (without LED)

HS High Cap Shiny (without LED)

*Only flat cap available with LED

Cap Color

2 Black

3 Red

5 Yellow

6 Green

7 Blue

Termination

M1 3.50 High, Solder Lug (PB6 only, Non-LED)

3.40 High, Solder Lug (with LED and PB7 Non-LED)

M2 5.50 High, Solder Lug, (PB6 only, Non-LED)

M3 8.20 High, Solder Lug, (PB6 only, Non-LED)

M4 3.50 High, PC Thru-Hole, (PB6 only, Non-LED)

Contact Material

& Finish

C Gold Over , Gold over Silver

Seal

A Sealed

LED Color

L00 Without LED

L01 White

L03 Red

L05 Yellow

L06 Green

L07 Blue

*Only flat cap available with LED

Wire

S500 500mm Lead

Y500 500mm Heat Shrink Lead