Micro-D Plastic Shell .050 Contact Spacing MD** Microminiature Rectangular Connectors with MICRO- PIN Contacts on .050 (1.27) centers. ICRO-D micreminiature rack/ panel connectors are used applications requiring highly reliable, extremely small, lightweight connectors. These connectors are available in 2 insulator materials, 2 mounting variations, 7 shell sizes accommodating fram 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applica- tions required by industry. ITT Cannon can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high density arrangements. MICRO-D connectors can also be custom harnessed to meet any customer requirement of single or multiple connectors. Pigtail tead and harness description must he given by the customer. A typical description would be: .5 #25 AWG, gold plated copper leads or 18 of #26 yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination. Consult the factory for any routine or complex harnessing of MICRO-D connec- tors. Glass-filled dially! phthalatea thermoset material used in high termperature applications that is immune to cleaning solvents. {t also has excellent dielectric prop- erties. Temperature range: 65F to +300F (55C to +149C). Glass-filled polyester -a thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties. Temperature range: 55F to +257F (65C to + 125C}. How to Order PCB ordering information - page 242 SERIES-INSULATOR STYLE-MATERIAL MO Clip mountingDiallyl phthalate MDB = Screw mountingDiallyl phthalate MDV = - Clip mountingPolyester 6 MDVB Screw mountingPolyester o CONTACT SPACING ] - .050 (1.27) centers CONTACT ARRANGEMENT 9-15-21-25-31*-37-51. See page 233. CONTACT TYPE P ~ Pin 5 - Socket MO* f- S39 P H O01 P SERIES - INSULATOR STYLE - MATERIAL ____| | CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE TERMINATION TYPE LOCKING HARDWARE (SCREW MOUNTING ONLY) H Insulated solid or stranded wire P Jackpost L Uninsulated solid wire K Jackscrew-standard $ - Solder pot to accept #26 AWG max. lL Jackscrew-low profile harness wire. F Float mount TERMINATION CODE** M - vant specification hardware, see page (H} 001 - 18, 7/34 strand, #26 AWG, on . MILW-16878/4, Type E Teflon, yel. Oot dat} toe ante - standard mounting low. : . (H} 003 - 18", 7/34. strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2 uninsulated solid #25 AWG gold plated copper. (L) 2 - 1 uninsulated solid #25 AWG gold plated copper. *Not available in clip mounting. ** See table below for additional codes. Standard Wire Termination Codes For lengths not shown, consult factory for proper modification code. All wire lengths are minimum. Harness Type (H) #26 AWG per MIL-W-16878 Type E Teflon, stranded. Solid Uninsulated Type (L) #25 AWG Gold Plated Copper Length All Yellow Color Coded* Termination Code Length 3 (76.2) HO20 HO27 L61 125 (3.18) 6 (152.4) HO19 HO16 156 -150 (3.81) 8 (203.2) HO26 H034 L57 .190 (4.83) 10 (254.0) H029 H025 139 250 (6.35) 12 (304.8) H028 HO02 158 375 (9.52) 18 (457.2) H001 H003 ut 500 (12.70) 20 (508.0) H038 H023 Li4 750 (19.05) 24 (609.6) H009 H004 L2 1.000 (25.40) 30 (762.0) HO10 HO05 L7 1,500 (38.10) 36 (914.4) HO11 HO06 L6 2.000 (50.80) 48 (1219.2) HO13 H048 LI6 2.500 (63.50) 72 (1828.8) HO17 HO46 L10 3.000 (76.20) 120 (3048.0) H042 H041 *Cavity #1 black ITT Cannon Dimensions are shown in inches (millimeters). Dimensions subject to change. BR For technical assistance, price or delivery information, call your local technical sales office or distributor. 9005 424 0000332 155 Microminiature Connectors 247Micro-D PCB .050 Contact Spacing MDM-PCB MDM-PCB connectors are designed for use with MDM-PCB connectors are available in 8 shell sizes flex circuitry, flat cable and printed circuit boards or with 9 to 100 contacts. Terminations may b multi-layer boards. They use the standard MDM straight (BS) or at 90 (BR, CBR) board wickae metal shell and provide high density and high Jackpost mounting for use with locking hardware | reliability tn board-to-board, board-to-cable and also available. cable-to-cable applications. How to Order ~ MDM-PCB Series MDM * - 25 P BS P - 7 139 At74 SERIES | ; INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE SHELL FINISH MODIFICATION CODES Sio}2@uU0) ain ELNWOTW SERIES MOUNTING HARDWARE FOR PCB MDM - Micro D Metal Sheil T Threaded Insert #2-56 Thd for Shell Sizes 9 thru 51 INSULATOR MATERIAL #4-40 Thd for Shell Size 100 No Letter Diallyl Phthalate No letter none V Polyester (Valox) @ TERMINATION TAIL LENGTH MODIFICATION CODE CONTACT ARRANGEMENT None .109 (2.77) + .015 (0.38) Standard 9, 15, 21, 25, 31, 37, 51 and 100 L61 - .125 (3.18) Size 100 not available in BR L56 ~ .150 (3.81) L57 .190 (4.83) eee el 139 .250 (6.35) ~ Pin (Plug) L58 .375 (9.52) 5 Socket (Receptacle) SHELL FINISH MODIFICATION CODES TERMINATION TYPE . . BS Straight PCB Termination None Yellow Chromate/ Cadmium over Nickel an Ai74 Electroless Nickel BR 90 PCB Termination . CBR 90 N Profile PCB Terminati A172 Gold over Nickel ~ ie Marrow Profle Pp lerminations A141 Irridite /Alodine | MOUNTING HARDWARE (Shell Flange) A30 Black Anodize P = Jackposts (For special modification codes, consult factory.) M7 Jackposts M83513/5-07 (Sizes 9-51) M17 Jackposts M83513/5-17 (Size 100) No letter none NOTE: Back molding material - Epoxy Hysol #MG8F-0134 949 ITT Cannon ma 9 oO oO S 4 2 4 Oo O Oo o 3 2 7 a gq q ma For technical assistance, price or delivery information, call yaur local technical sales office or distributor.Micro-D Metal Shell .050 Contact Spacing MDM Standard Wire Termination Codes Cannon Modification Code (Not MS) The following termination codes are listed for your information. For lengths not shown, consult factory for proper modification code. All wire lengths are minimum. Harness Type (H) #26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. Solid Uninsulated Type (L) #25 AWG gold plated copper. Length All Yellow Color Coded* Termination Code Length 3 (76.2) H020 HO27 161 125 (3.18) 6 (152.4} HO19 HO16 L56 150 (3.81) 8 (203.2) H026 H034 L5?7 .190 (4.83) 10 (254.0) HO29 H025 139 250 (6.35) 12 (304.8) HO028 H002 L58 375 (9.52) 18 (457.2) HOO1 HO03 ul 500 (12.70) 20 (508.0) H038 H023 Li4 750 (19.05) 24 (609.6} HOOg HO04 L2 1.000 (25.40} 30 (762.0) 4010 HO05 L7 1.500 (38.10) 2 } 36 (914.4) HO11 HO06 L6 2.000 (50.80) a 48 (1219.2) HO13 H048 L16 2.500 (63.50) e 2 72 (1828.8) HO17 H046 110 3.000 (76.20) 120 (3048.0) H042 H041 Millimeters are in parentheses. = *Cavity #1 black Contact Arrangements (Face View of Pin insert - Use Reverse Order for Socket Side) Standard e 3 i {82.70) 2: 043 TP. (18.92) : Ao Re SE $12.34 8.6. 768 Loe Ba SOT BO a7 abs a 4013 32 send $5 : 2131818161716 192028 9 Contacts 15 Contacts ee 24 Contacts. 1234 Fe 7S stones 14 sacs $7 @ 9 r0r erates 16 pt PELL EEL PVP Peer COs este cee utetratsts se eeeecserererses ttt Perit rt tty $1516 47. 18 {9202122232425 EVAR 19 202122 23924 25:262728 293035 208122 2324282627 2829396 3132.993435. 36.37 > 25 Contacts 31 Contacts oa 37 Contacts : 2 6 F088 90 12 A848 36 WF ae! J 20 at ae BH 24 2596 ie 32{33 faa Las} te 147/38] I0Lab Pat fan lad lag fas tae faz lad lag 15015; 4 e1e;6 pededeedace , Lo B :? 3 e.- alelriletr ie efi : Sab sl " ef a e fale eae 6 a7 [68] Bul FOL 71 L721 rat 26 asl oeay PE TPB BO 8182.89, Ba B86 BP. BE AG: OH -Gt 99590 -94"OR ge By ae "BO: 108 51 100 Contacts Contact identification numbers are for reference only and do not appear on insulator or connector body. Coaxial 744, (18.14} 007 Size 25 Shell Size 51 Shell (0.18) @ 5 Micro: Contact 20: Micro Contacts 2 Coax or 2 Power 4 Coax-or 4 Power {Net MS} Dimensions are shown in inches (millimeters). ITT Cannon mst Dimensions subject to change. 933 | | 5005 yeu Oog 0318 6&b BEBE technical assistance, price or delivery information, call your local technical sales office or distributor.b | Micro-D Metal Shell .050 Contact Spacing MDM Mounting Hardware Views (sizes 9 51) @: hardware is factory installed. 735 (18.67} MATING 014 = 004 yf FRE CoOWTon we. {0.36 0.10) ALLOWABLE _ AEE. ONLY DIAMETRAL FLOAT 150-+.003 490 -020 (0-51) MAX: ALLOWABLE (3:814::076) | (12,45) MAX. AXIAL FLOAT } a) " | | 185.(4:70) 2 : ; MAX. 093 4 2 5 {2:36} iG - | REF. 4 2090 +0035 (2.29- 6.038) 014 f 031 + .003 2-56 PART HAS A 040 (1.02) (0:79: 0.68) manne UNC-28 ~ MAX. AXIAL FLOAT FAC! Float Mount~ (F} dackscrew- (K)- Standard Shown here is a cutaway view of the float mount for the MD connector. The basic shell dimensions are the same for the float mount and the screw e"" hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. epair kit availableconsult factory. CONNECTOR HEX HEAD SHOWN. FOR 050 (1.27) ACROSS FLATS REF..ONLY 050 (1.27) DEEP {REF} 155 (3.94) MAX - Serta MATING PART HAS A 040 (1 02) FACE MAX, AXIAL FLOAT 42-56 UNE-2A dackserew- (L} Low Profile *NOQTE: Torque values are as follows: Low Profile Jackscrew (L)2.5 in/Ibs Standard Jackscrew (K)2.5 in/Ibs Mounting Hardware to Military Specification (for sizes 9 100) per MIL-C-83513/5 This hardware supplied in kits unassembled (2 pieces of each item). PLUG (REF) WITH : .092 (2:34) DIA: Fea ae MOUNTING HOLES : #2-56 UNC-2A PLUG (REF) WITH THREAD TYP. : ; 062 (1.57) 092 (2.34) DIA. HEX. (REF) 5 MOUNTING HOLES 361 (9.47) MAX | @ 390 8.91) MAX. ==; + im SIZE 400 ONLY | f 010 (0.25) TH'K (REF) | Allen Head B68 (22.05) MAX. 010 (025) ne Optional Head Contiguration 902 (22.91) MAX. POTTING WELL THK (REF, Plug and Receptacle ' REE ) POTTING WELL (REF} Low and High Profile (REF) Figure 1, Jackstrew ~ Low profile : Size 9-51 " Slotted Head Size 100* (same dimensions) Size 9-51 Size 108* #2-56-UNC.-28 THREAD #440 UNC -2A THREAD \, .1901:185 (4.85/4,70) eee Oe IGE {4 70/4 4a) -125 3.18) HEX. Figure 2. Jackscrew ~ High Profile Slotted Head Size 5-51 Size 100* To order hardware kits separately, order either by M83513/5-** or by 320-950X-XXX. Size 9-51 Size 100* ATS + 025 Description Mod Code Part Number x Mod Code Part Number ae 1 | Soe Too Sane Slotted Head Jackscrew Assy Low Profile (Figure 1) M5 320-9508-025 05 M15 320-9508-021 15 Slotted Head Jackscrew Assy High Profile (Figure 2) M6 320-9508-027 06 M16 320-9508-023 16 LOCKWASHER . Allen Head Jackscrew Assy Low Profile (Figure 1} M2 320-9508-026 02 M12 320-9508-022 12 RETAINING NUT | 082.010 Allen Head Jackscrew Assy High Profile (Figure 2) M3 320-9508-028 03 M13 320-9508-024 13 154 (3,91) HEX, 157 40.28) 7 187 G78) HEX. IZE 100 SAME Jackpost Assy (Figure 3) M7 320-9505-033 07 M17 320-9505-030 7 Figure 3. Jackpost Assembly Size 9-51 Size 100* ITT Cannon *Size 100 requires B1 size mounting holes. Dimensions are shown in inches (millimeters). Dimensions subject to change. | q 0 os 4 2 y oO Oo O 0 3 2 2 2 Q 2 = For technical assistance, price or delivery information, call your lacal technical sales office or distributor. Microminiature Connectors 237syojoauuo) aINjeIUIWOADIWY 248 Micro-D Plastic Shell .050 Contact Spacing MD/MDV Performance and Material Specifications MATERIALS AND FINISHES Sheil Insulator (One Piece) MD/MDB: Glass-filled ther- moset plastic MDV/MDVB: Thermoplastic ELECTRICAL DATA No. of Contacts - 9 to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only) Contacts Copper alloy, gold plate Coaxial Cable ~ RG-178/U (Not available for MO clip mount) Wire Size #24 thru #32 AWG Contact Termination Crime stationary MECHANICAL FEATURES Size or Length -7 sizes Coupling Friction /jackscrews Polarization Keystone-shaped shells Contact Spacing Centers -.050 (1.27mm) Shell Styles ~ Plug and receptacle Consult factory for availability. With Clip Mounting Slots Plug MD Glass-filled Diallyl Phthatate Plastic Insulator MDV Glass-filled Polyester Plastic Insulator 3066 4.85) Ee MAX: Receptacle A B C D E Avg. Weight*** Part Number by Shell Size Max. Max. Max. Max. Max. 5% (02.)/5% (gm) M01-9P** MOV1-9P** 512 (13.00) .292 (7.42) 405 (10.29) 170 (4.32) .215 (5.46) 026 (0.73) MD1-9S** MDV1-9S** 512 (13.00) .376 (9.55) 405 (10.29) 170 (4.32) 215 (5.46) 026 (0.73) MD1-15P** MDV1-15P#* .662 {16.81} AA? (11.23) 555 (14.10) 170 (4.32) 215 (5.46) 038 (1.10) MD1-15S** MOV1-15S** .662 {16.81} 526 (13.36) 555 (14.10) 170 (4.32) 215 (5.46) 035 {1.00} MD1-21P** MDV1-21P** 812 (20.62) 592 (15.04) 705 (17.91) 170 (4.32) .215 (5.46) 053 (1.50) MD1-215** MDV1-21S** 812 (20.62) 676 (17.17) 705 (17.91) 170 (4.32) .215 (5.46) .050 (1.40) MD1-25P** MDV1-25P** 912 {23.16} 692 (17.58) 805 (20.45) 170 (4.32) 215 (5.46) .063 (1.80) MD1-25S** MDV1-25S** 912 {23.16} 776 (19.71) 805 (20.45) 170 (4.32) 215 (5.46) 056 (1.60} M01-37P** MODV1-37P** 1.212 (30.78) 992 (25.20) 1.105 (28.07) 170 {4.32} 215 (5.46) 086 (2.45) MD1-37S** MDV1-378** 1.212 (30.78) 1.076 (27.33) 1.105 (28.07) 170 {4.32} 215 (5.46) .076 (2.15) MD1-51P** MDV1-51P** 1.162 (29.51) 942 (23.93) 1.055 (26.80) 213 (5.41) .258 (6.55} .109 (3.10) MD1-518** MDV1-51S** 1.162 (29.51) 1.026 (26.06) 1.055 (26.80) 213 (5.41) .258 (6.55) **Add lead type and length, see Part Number Explanation. *kWeight given is with 1/2, uninsulated solid #25 AWG gold plated copper pigtails. ITT Cannon 093 (2.65) ) Dimensions are shown in inches (millimeters). ma 9 Qa Qo 5 4 2 4 o o Oo o 3 | 3 o g 2 ma For technica! assistance, price or delivery information, call your local technical sales office or distributor. Dimensions subject to change.Micro-D Plastic Shell .050 Contact Spacing MD** Panel Mounting Hardware eo" Mounting Illustrated is the recommended method of front mounting with metal panel mounting keys. Panel mounting keys are available with or without coupling retention clips. For front mounting, place the rear of the connector thru the panel cutout. With the mounting flange against the panel, fully insert the panel mounting keys thru the slots Coupling Retention Clip Mounting Screw Brackets in the flange and thru the panel cutout. Retaining the (see Figure 2) (see Figures 1 and 3} keys in this position, bend them outward against the rear of the panel. When mating a front mounted connector with an unmounted connector, a coupling retention clip assembly may be used to securely lock the two together. Mounting screw brackets are available and may be used instead of the panel mounting keys. Description Part Number Panel Mounting Key 201-9100-000 Mounting Key and Coupling Clip Assembly 294-9100-000 2 Mounting Screw Bracket 015-9100-000 Edgehoard Mounted Panel = *Edgeboard Mounting Bracket 015-5009-D00 (see Figure 4) Mounting Key 8 ~ **Edgeboard Mounting Bracket and E = Coupling Clip Assembly MD51428-1 aS *Must be ordered separately: specify left and right hand for complete = assembly. ** Must be ordered separately; assembly contains a set of left and right hand types. Dimensions (Clip Mounting Only} T 330% 005. 200+ -005 (5.68 0. 18} : u O80. : : 8.38 0.13 Speecbee : ( ) oe 266% 005 (6.73 0.13) at Plag and Receptacle : : Plug and Receptacle : Plug Front Mounted oo Rear Mounted = "> : Front Mounted | : Receptacle Rear Mounted Panel Cutouts : A B c D 5 | ae : : Shell Cutout +.004 (0.10) + 004 (0.10) + 004 (0.10) + 005 (0.13) Be A A . s . le A is fo : AT Size Figure .000 (0.00) .000 (0.00) = .000 (0,00) 000 (0.00) > 8 To eR : Ce | 408 (10.36) 172 (4.37) 650 (16.51) 089 (2.26) of beh mal gts 0.88 R 0150.38) R: ah FULLR. (TYP) Max. ye WAC EET 2 408 (10.36) 172 (4.37) _ _ @ Figure 1 Figure 2 9 3378 ( 9.60) 207 (5.51) 650 (16.51) 089 2.26) : Front. Mounting ee . 4 400 (10.16) 091 (2.31) - _ : a (oes 018-4 002 ~000-- 005 (0.13) MAX, ] 588 (14.94) 172 (4.37) 195 (20.19) 089 (2.26) oo Aiay O08 =e (0.46 +.0.05 0.00) RTYP) 2 588 (14.94) 172 (4.37) = t re A I ti : i * o LL 15 3 528 (13.28) 247 (5.51) 795 (20.19) 089 (2.26) TH pe Be : et oe = 000. 4 550 (13.97) 091 (2.31) = = Ly aera typ 020-19 = 0.00) 1 738 (18.75) 172 (4.37) 945 (24.00) 089 (2.26) FULLER. (TYP) ot: 26 27 TYP. PANEL REF. Figure 3 Figure 4 2 738 (18.75) 172 {4.37} = = Rear Mounting Edgeboard Mounting 21 3 678 (17.27) 217 (5.51} 945 (24.00) 089 (2.26) : 4 700 (17.78) 091 (2.31) = = 1. A panel thickness of 1/8 (3.17mm) maximum is recommended for ease of tab bending 1 838 (21.29) 172 (4.37) 1.045 (26.54) 089 (2.26) when a panel mounting key & clip assembly or edgeboard mounting brackets are used. 2 838 (21.29) 172 (4.37) _ _ 2 Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for 25 3 778 (19.76) 217 (5.51) 1.045 (26.54) 089 (2.26) 3. Figure 4 is for edgeboard mounting bracket or edgeboard clip assembly. The .184 + 002 4 800 (20.32) 091 (2.31) = = (2.67 = 0.05) dimension locates the MD socket insulator flush with the end of the board. | 1.138 (28.91) 172 {4.37} 1.345 (34.16) 089 (2.26) 4. Screw brackets (015-9100-000) will accommodate #2-56 screws. 3 1.138 (28.91 172 (437 5. Front mounting (Fig. 1) and rear mounting (Fig. 3) accommodate #2-56 screws when 138 (28.91) - (4.37) jackscrews are used. See detail on page 24 when jackposts are used. 3 3 1.078 (27.38) 217 (5.51) 1.345 (34.16) 089 (2.26) 4 1.100 (27.94) 091 (2.31) = 1 1.088 (27.64) 215 (5.46) 4.295 (32.89) 089 (2.26) @ 2 1,088 (27.64) .215 (5.46) = = 41 3 1,028 (26.11) .260 (6.60) 1.295 (32.89) 089 (2.26) 4 1.050 (26.67) 091 (2.31) _ _ Dimensions are shown in inches (millimeters). ITT Cannon . Dimensions subject ta change. 249 For technical assistance, price or delivery information, call your local technical sales office or distributor. mm 9005424 9000334 TclMicro-D Plastic Shell - .050 Contact Spacing MDB/MDVB With Screw Mounting Holes (Conforms to MIL-C-83513) Pi Glass-filled Diallyl Phthalate Glass-filled Polyester "s MDB Plastic Insulator MOVB Plastic Insulator -_RWO.MIG: HOLES .091-+ 003 2312008 900 (2:54) Receptacle MAX a cops : ee ee ee SolderPot are oe gn es a Le sg = \ b oe fee, m oo Lay LE mage 1 re de 100 (2.54) &oe MAX. MO & Solder Put az os , 2 o a6 =. @ 8 = Weight*** 3 i A B c D E F 5% (02.) a H Part Number by Shell Size Max. Max. Max. Max. Max. 005 +5% (gm.) MDB1-9P** MDVB1-9P** .788 (20.02) .292 (7.42) A08 (10.36) 173 (4.39) 218 (5.54) 565 (14.35} 026 (0.73) MDB1-9$** MDVB1-9S** 788 (20.02) .380 (9.65) 408 (10.36) -173 (4.39) 218 (5,54) 565 {14.35} 025 (0.70) MDBI-15P** MDVB1-15P** .938 {23.82} 442 (11.23) 588 (14.17) 173 (4.39) 218 (5.54) 715 (18.16) 038 (1.10) MDB1-15S** MDVB1-158** 938 (23.82) 530 (13.46) -588 (14.17) 173 {4.39} 218 (5.54) 715 (18.16) 035 (1.00) MDB1-21P* MDVB1-21P** 1,088 (27.64) 592 (15.04) 108 (17.98) .173 (4.39) 218 (5.54) 865 (21.97) .053 (1.50) MDB1-21S** MDVB1-21** 1.088 (27.64) 680 (17.27} 708 (17.98) 173 (4.39) 218 (5.54) 865 (21.97) 050 (1.40) MDB1-25P** MDVB1-25P** 1.188 (30.18) .692 (17.58) 808 (20.56) 173 (4.39) 218 (5.54) 965 (24.51) .063 (1.80) MDB1-25S** MDVB1-25S** 1.188 (30.18) 780 (19.81} 808 (20.56) 173 (4.39) 218 (5.54) 965 (24.51) 056 (1.60) MDB1-31P#* MDVB1-31P** 1,338 (33.98) 842 (21.39) 958 (24.33) AT3 (4.39) 218 (5.54) 1.115 (28.32) 080 (2.30) MDB1-318** MDVB1-318** 1.338 (33.98) .930 (23.62) .958 (24.33) 173 (4.39) 218 (5.54) 1.115 (28.32) 073 (2.10) MDB1-37P** MDVB1-37P** 1.488 (37.80) 992 (25.20) 1.108 (28.14) 173 (4.39} 218 (5.54) 1.265 (32.13) 086 (2.45) MDB1-37S** MDVB1-378** 1,488 (37.80) 1.080 (27.43) 1.108 (28.14) .173 (4.39) 218 (5.54) 1,265 (32.13) 076 (2.15) MDB1-51P** MDVB1-51P** 1.438 (36.52) 942 (23.93) 1.008 (26.87) 220 (5.59) .260 (6.60) 1.215 (30.86) 109 (3.10) MDB1-51$** MDVB1-515** 1.438 (36.52) 1.030 (26.16) 1,058 (26.87) 220 (5.59) .260 (6.60) 1.215 (30.86) 093 (2.64) **Add lead type and length, see Part Number Explanation. *eWeight given is with 1/2, uninsulated solid #25 AWG gold plated copper pigtails. Di i h in inch illimeters). 950 ITT Cannon eo a ona int) For technical assistance, price or delivery information, call your local technical sales office or distributor. M 9005424 0000335 965 a