T-21 21mm Carbon Potentiometer FEATURES - Carbon resistive element. - High mechanical endurance. - Upon request: Detents. Stereo matching. Switch. Nut & washer. Custom assemblies with wires and connectors. ELECTRICAL SPECIFICATIONS - Range of values* MECHANICAL SPECIFICATIONS - Standard tolerance*: - Mechanical rotation angle: 310 5 - Electrical rotation angle: 290 20 - Torque: 0.5 to 1.5 Ncm. (0.7 to 2.1 in-oz) - Stop torque: > 80 Ncm. ( > 112 in-oz) 20% 30% - Max. Voltage: 250 VDC (lin) 150 VDC (no lin) - Nominal Power 50C (122F) (see power rating curve) 0.25 W (lin) 0.12 W (no lin) Lin ; Log; Alog. - Taper* (Log. & Alog. only Rn > 1K) - Residual resistance*: - Equivalent Noise Resistance: * Others upon request. ** Up to 85C depending on application. - Operating temperature**: -25C + 70C (-13F + 158F) HOW TO ORDER STANDARD T-21 A Series C M06 07 Models Metal shaft Plastic shaft A X D W T Y S Z A Code Shaft OA Bushing O B Length C Shafts Metal M06 M07 M08 M11 223 Bushings Terminals C= Solder Lugs H= Horiz. PCB L= Horiz. in Line PCB V= Vert. PCB T-21 OPTIONAL EXTRAS Plastic P01 P12 07 08 09 6 6 6 M10 x 0.75 M10 x 0.75 M10 x 0.75 9 12 19 11 12 6 "U" 6 "U" 3/8" x 32 h. 3/8" x 32 h. 9 12 13 6.35 "U" 3/8" x 32 h. 9 14 9 00 6.35 M10 x 0.75 2020 0 Taper Shafts spec. length A= linear B= Log. C= Alog. (See note 6) XX.X (See note 8) 01P= 1 detent 11P= 11 detents 41P= 41 " Value Nut & washer (See note 7) Switch Tolerance F01 = Mod. F1 112 = Mod. F2 "" "" 744 = Mod. F2 1010= 10% 2020= 20% 3030= 30% (See note 3) M16 (See note 2) (See note 4) NOTES: 3D = 3dB 4D = 4dB 6D = 6dB Detents (See note 10) Other tapers on request For models pot. X,W, S (See note 1) Stereo matching -TA = Loose nut & washer MTA= Assembled nut & washer MT- = Assembled nut -T- = Loose nut (See note 9) (See note 5) (1) MODELS : Models D y T are not available with "V" terminals. (2) SHAFTS: The codes indicate diameter and length. M08: Code for the double potentiometer. (3) BUSHINGS ; The codes types 11, 12 and 13 have an antirotation lug (at 90CW). Plastic shaft and double model are only available with O6 bushing. (4) VALUE: Code: 10 1 Number of zeros 2 first digits of the value. In models "D" and "T" with different values, order under special drawing number. (5) Tolerance (special), upon request. Example : +7% -5% Code : 07 05 (6) Shafts special length: Only for special length and plain shafts (not knurled). Example: Shaft O6 L= 24.5 Flatted and slotted shafts, etc. will need drawing. Shaft M08 (T-21D) with other length, order under special drawing number. Recomendation : Shaft L > 60 ..... bushing C = 19 (7) DETENTS : - Not available in models with plastic shaft X, W, Y, Z. - Detents and switch are not compatible. (8) Stereo matching: Only available in tandem models and upon request. (9) SWITCHES : Two types of switches are offered: F1 and F2. F1 = The code is "F01" Plastic shafts are only available if they are code P10, P11 or P12 F2 = (Only with metal shaft) Indicate the corresponding I-21 switch code. (10) Switch option not available with antilog taper. www.piher.net 80 negative tolerance positive tolerance M06 ....... 24.5 special length shafts HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS Shaft length .................................. 0 standard Detents ......................................... Without Stereo matching ............................ Only for model "T" and upon request Switch ............................................ No switch Nut & washer ................................ Without nut and washer T-21 A C + DRAWING NUMBER (Max. 16 digits) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. MODELS WITH METALIC SHAFTS S 10 T-21 T A 7 E 7 T-21 A M 10 x 0.75 26 6 6 2.5 26 M 10 x 0.75 9 9 60 + 0.5 A = Initial S = Wiper E = Final 21.5 10 21.5 20 4 T-21 S 7 7 T-21 D 60 + 0.5 PI H NA 8 6 26 26 2.5 4 4 6 M 10 x 0.75 50 + 0.5 21.5 10 60 + 0.5 5 P ES 0.7 60 + 0.5 20 A ER 9 22.5 9 MODELS WITH PLASTIC SHAFTS 7 9 + 0.1 T-21 W L + 0.5 0.1 T-21 Y L + 0.5 9 P ES 0.7 K 22.5 A 4.6 5 22.5 NA NA A ER 0.7 9 26 1.2 6 7.5 5 K P ES PI H PI H ER 4 26 1.2 7 6 4 0.1 1 1.5 7 1 T-21 X 22.5 7 7 T-21 Z M 10 x 0.75 K 9 L 26 1.2 2.5 0.1 6 26 6 2.5 0.1 1.2 M 10 x 0.75 K + 0.5 21.5 10 9 L 10 + 0.5 21.5 TERMINALS 2 5 10 T-21 H 5 + 0.1 2.5 1.3 1 10 16 4 22.3 2.5 + 0.1 2.5 1.3 10 T-21 C 5 5 21.5 T-21 V + 0.1 1.3 5 4 2.5 5 + 0.1 1 5 4 2.5 5 10 T-21 L 2.5 20 10 5 5 5 5 13.5 16 10 16 + 0.1 1.3 + 0.1 10.1 www.piher.net 81 PLASTIC SHAFTS T-21YT-21 w/Sw F01 Y C / I F01 T-21 X / Y S/ I T-21 X/Y without Switch Knurling length T-21 X Knurling length T-21 Y CODE T-21 Y K= 5 L = 16 CODE P10 K= 0 L= 2 / P01 K = 14.6 L = 25 P11 K=6 L = 10 / P02 K = 35 L = 46 P12 K = 12 L = 16 L = 15 P03 K = 12 L = 26 L = 25 P04 K = 12 L = 36 L = 35 P05 L = 46 L = 45 K = 35 T-21 W/Z without Switch Knurling length P06 T-21 W T-21 Z K = 12 L = 26 L= 26 L= CODE P07 K = 12 L = 36 L= 2636 P08 K = 12 L = 46 L= 46 L= P09 METALIC SHAFTS L 4 40 M04 6 60 M06 6.35 60 M07 4/6 50/60 M08 L A L 15 2 6 7 M11 A 20 2 10 11 M12 25 4 12 14 M13 30 4 12 14 M14 35 4 12 14 M15 40 4 12 14 M16 1 O6 B C A 90 O + 5 O FLATTED SHAFT B C L CODE + 0.5 SLOTTED SHAFT +5O 18 tooth CODE 0O KNURLED SHAFT UNDER DRAWING A + 0.5 A L A PLAIN SHAFT L + 0.5 BUSHINGS NON ROTARY PAWL 10.1 C CODE A C 21.5 10 07 6 M10 x 0.75 9 08 6 M10 x 0.75 12 09 6 M10 x 0.75 19 14 6.35 M10 x 0.75 9 4 C 10.7 21.5 9.5 CODE A B C 11 6 3/8" x 32 h. 9 12 6 3/8" x 32 h. 12 13 6.35 3/8" x 32 h. 9 TAPERS 7 DETENTS POWER RATING CURVE W (%) 100 M 10 x 0.75 100 % 80 26 2.5 6 % Rn C A: Lin. B: Log. C: Alog. 60 A 40 40 % B 20 9 60 + 0.5 13.5 A 0 21.5 25 50 ELECTRICAL LIFE MECHANICAL LIFE* : TEMPERATURE COEFFICIENT THERMAL CYCLING DAMP HEAT VIBRATION (for each plane X,Y,Z) 75 E 100 C 50 70 % Mechanical rotation TESTS TYPICAL VARIATIONS 1.000 h. 50C; 0.25 W 25.000 (10-15 CPM) -25C; +70C 16 h. @ 85C; 2h. @ -25C 500 h. 40C 95% HR 2 h. @ 10 Hz - 55 Hz. NOTE: Out of range values may not comply these results. (*) only applicable to values 1K. For lower values please consult. PACKAGING Boxes of 150 / 200 pieces (160 x 110 x 85 mm.) www.piher.net + 0.1 3 B 2 A A 2.5 B (Thread) B (Thread) STANDARD 82 5 % 3 % (Rn < 1 M) 300 ppm (Rn < 100 K) 2.5 % 5 % 2 % SWITCH F1 22 MECHANICAL & ELECTRICAL SPECIFICATIONS 11.4 5.9 F1 OPERATING ANGLE OPERATING TORQUE MAXIMUM AXIAL CHARGE NOMINAL CURRENT CONTACT RESISTANCE TEST VOLTAGE (DIELECTRIC STRENGTH) 50 5 3 -7 Ncm (4.2- 9.8 in-oz) 80 N; 17 pounds 1A; 250 VAC 25m 2000 V (50 Hz) 16.5 SWITCH F2 F2 2 or 4A; 250 VAC 25 m 2000 V 100 M ELECTRICAL SPECIFICATIONS SWITCH RATING CONTACT RESISTANCE DIELECTRIC STRENGTH INSULATION RESISTANCE MECHANICAL MECHANICALSPECIFICATIONS SPECIFICATIONS F2 35 5 4 mm. 2.5 mm. 2 to 9 Ncm. (2.8 to 12.7oz/in) 4 to 7 N (14 to 27 oz) 10.000 cycles > 100 Ncm. (142 oz/in) OPERATING ANGLE (ROTARY) PUSH / PUSH OPERATING TRAVEL PUSH / PULL OPERATING TRAVEL OPERATING TORQUE (ROTARY) OPERATING FORCE (Push/Push ; Push/Pull) MECHANICAL LIFE STOP TORQUE R O T A R Y 2.5 T-21 ... F2 13.5 P U S H 5 2.5 T- 21 ... F2 12.5 + 0.1 5 5 1 7 E S A 17.5 4.5 21.5 2.5 5 5 2 3 Terminals pot. 1 2 3 5 6 4 5 6 17.5 2 16 O1.5 5 12.5 2.5 12.5 Terminals switch 5 2.5 5 6 2 3 Terminals pot. www.piher.net 2.5 5 Cod.: 732 734 632 634 Cod.: 542 544 Cod.: 532 534 5 2 12.5 6 3 DPST 5 2 4 6 1 3 DPDT 83 1 3 O1.5 SPDT 2.5 4 5 6 1 2 3 O1.5 2.5 5 5 Cod.: 722 724 2 622 624 SPST 3 5 5 1 2 3 2.5 O1.5 O1.5 5 5 5 5 2.5 Cod.: 712 714 612 614 2 3 17.5 5 2 5 5 O1.5 Terminals switch DPST 6 3 12.5 2.5 5 5 5 3 21.5 2.5 A S E 2.5 Cod.: 522 524 1 SPDT 3 12.5 2 SPST 2 2.5 O1.5 5 5 2.5 29.5 PUSH / PULL 1 2 3 5 5 Cod.: 512 514 12.5 10 5 5 2.5 2 3 9 60 + 0.5 26 O1.5 A S E 2.5 2.5 11.2 60 + 0.5 2.5 6 26 M10 x 0.75 6 9 PUSH / PUSH 4 M 10 x 0.75 5 2 6 4 1 3 DPDT Cod.: 742 744 642 644 (only switch) I-21 HOW TO ORDER OPTIONAL STANDARD I- 21 2 3 Series 4 M06 0 Code Switch model Circuits Shafts Shaft spec. length 1 2 3 4 1 2 1 2 1 1 2 2 M04; L= 40 M06; L= 60 XX.X I - 21 (See note 1) (See note 3) (See note 2) Nut & washer Code Switch model Terminals 1 2 3 5 6 7 rotary switch push/ push switch push/ pull switch rotary switch push/ push switch push/ pull switch Solder lugs Solder lugs Solder lugs PCB PCB PCB - TA = Loose nut & washer MTA = Assembled nut & washer Code Current Voltage 2 4 2 A 4 A 250 V 250 V MT - = Assembled nut - T - = Loose nut NOTES: (1) When only the switch is ordered (without potentiometer), it will be called "I -21" followed by the respective code. (2) The shaft and bushing for "I -21" is: COD. M06 B M10 x 0.75 L 60 Only for special length and plain shaft (not knurled). Example: E: O6 L= 24.5 M06 24.5 special length Flatted and slotted shafts, etc. will need drawing. STANDARD OPTIONS HOW TO ORDER CUSTOM DRAWING Shaft length ........................................... See note 2 (Max. 16 digits) I-21 + DRAWING NUMBER Nut & washer .................................... Without nut and washer This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. R O T A R Y I -21 ... P U S H 5 5 1+0.1 4 11.5 I- 21 ... 3 2 1 5 5 5 5 + 0.1 1 4 5 6 PUSH / PUSH 4 1 M10 x 0.75 5 1 4 4 10.5 4.5 2.5 9 L 60 2.5 O6 2.5 O6 16 M10 x 0.75 16 (3) A 6 L 60 + 0.5 21.5 21.5 + 0.5 9 26 21.5 PUSH / PULL NUT & WASHER 2.5 0.7 10 2.5 0.7 13 9.8 7.5 M7 x 0.75 14 W 3/8 x 32 PACKAGING Boxes of 100 pieces ( 160 x 110 x 85 mm.). www.piher.net 84 2.5 0.7 14 10.5 18 M10 x 0.75 18 OPEN CIRCUIT FEATURE (CUT TRACK) PCF Cut track at the end of the travel PCI Cut track at the beginning of the travel. A S A E S E A S E CCW on-off (A) A S E CW on-off (E) A = Initial S = Wiper E = Final. PCI, PCF and other configurations available upon request. Check the ordering code with Piher. RECOMMENDED CONNECTIONS VCC E Piher potentiometer's recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. Ground. RL 100 x R Disclaimer Contact The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls SA Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Piher"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher's terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. 00 20 / 5 3 /E C ) / R o H S3 EU ) cc 5 / 86 3 / Pb (2 01 i ng to ELV or d ( Piher is an AmphenolTM company. A Note: Piher products can be adapted to meet customer's requirements. Due to continuous process improvement, specifications are subject to change without notice. v080518 Poligono Industrial Municipal Vial T2, 22, 31500 Tudela - Spain. t. +34-948-820450 f. +34-948-824050 sales@piher.net www.piher.net Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Piher: T21ACM0607-105A2020-20.0-TA T21AHM0607104A2020