LSG T670, LSP T670, LSY T670, LOP T670,
LYG T670
Multi TOPLED®
2003-03-04 1
Besondere Merkmale
•Gehäusetyp: weißes P-LCC-4 Gehäuse
•Besonderheit des Bauteils: beide
Leuchtdiodenchips getrennt ansteue rbar, hohe
Signalwirkung durch Farbwechsel der LED
möglich
•Wellenlänge: 628 nm (super-rot),
606 nm (orange), 590 nm (gelb),
570 nm (grün), 560 nm (pure green)
•Abstrahlwinkel: Lambertscher Strahler (120°)
•Technologie: GaAlP (super-rot, orange, gelb,
grün), GaP (pure green)
•optischer Wirkungsgrad:
1,5 lm/W (super-rot, orange, gelb),
2,5 lm/W (grün), 0,6 lm/W (pure green)
•Gruppierungsparameter: Lichtstärke
•Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
•Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
•Vorbehandlung: nach JEDEC Level 2
•Gurtung: 8 mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Anwendungen
•Informationsanzeigen im Innen- und
Außenbereich
•optischer Indikator
•Hinterleuchtung (Schalter, Tasten, Displays,
Werbebeleuchtung, Allgemeinbeleuchtung)
•Innenbeleuchtung im Automobilbereich
(z. B. Instrumentenbeleuchtung)
•Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
•Einkopplung in Lichtleiter
•Laufschriftanzeigen
•Signal- und Symbolleuchten
Features
•package: white P-LCC-4 package
•feature of the device: both chips can be
controlled separately, high signal efficiency
possible by color change of the LED
•wavelength: 628 nm (super-red), 606 nm
(orange), 590 nm (yellow), 570 nm (green),
560 nm (pure green)
•viewing angle: Lambertian Emitter (120°)
•technology: GaAlP (super-red, orange, yellow,
green), GaP (pure green)
•optical efficiency: 1.5 lm/W (super-red,
orange, yellow), 2.5 lm/W (green),
0.6 lm/W (pure green)
•grouping parameter: luminous intensity
•assembly methods: suitable for all
SMT assembly methods
•soldering methods: IR reflow soldering and
TTW soldering
•preconditioning: acc. to JEDEC Level 2
•taping: 8 mm tape with 2000/reel, ø180 mm
or 8000/reel, ø330 mm
Applications
•indoor and outdoor displays
•optical indicators
•backlighting (switches, keys, displays,
illuminated advertising, general lighting)
•interior automotive lighting
(e.g. dashboard backlighting)
•marker lights (e.g. steps, exit ways, etc.)
•coupling into light guides
•light writing displays
•signal and symbol luminaire
2003-03-04 2
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Typ
Type
Emissions-
farbe
Color of
Emission
Farbe der
Lichtaustritts-
fläche
Color of the
Light Emitting
Area
Lichtstärke
Luminous Intensity
IF = 10 m A
IV (mcd)
Bestellnummer
Ordering Code
color 1 color 2
LSG T670
LSG T670-J+J
LSG T670-J+K
LSG T670-J+L
LSG T670-K+J
LSG T670-K+K
LSG T670-K+L
LSG T670-L+J
LSG T670-L+K
LSG T670-L+L
super-re d / gre en colorless cl ear 4.5 ... 18.0
4.5 ... 7.1
4.5 ... 7.1
4.5 ... 7.1
7.1 ... 11.2
7.1 ... 11.2
7.1 ... 11.2
11.2 ... 18.0
11.2 ... 18.0
11.2 ... 18.0
4.5 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
Q62703Q4316
LSP T670
LSP T670-H+G
LSP T670-H+H
LSP T670-J+G
LSP T670-J+H
LSP T670-J+J
LSP T670-K+G
LSP T670-K+H
LSP T670-K+J
super-re d / pu re
green colorle ss c lear 2.8 ... 11.2
2.8 ... 4.5
2.8 ... 4.5
4.5 ... 7.1
4.5 ... 7.1
4.5 ... 7.1
7.1 ... 11.2
7.1 ... 11.2
7.1 ... 11.2
1.8 ... 7.1
1.8 ... 2.8
2.8 ... 4.5
1.8 ... 2.8
2.8 ... 4.5
4.5 ... 7.1
1.8 ... 2.8
2.8 ... 4.5
4.5 ... 7.1
Q62703Q4318
LSY T670
LSY T670-J+J
LSY T670-J+K
LSY T670-J+L
LSY T670-K+J
LSY T670-K+K
LSY T670-K+L
LSY T670-L+J
LSY T670-L+K
LSY T670-L+L
super-red / yellow colorless clear 4.5 ... 18.0
4.5 ... 7.1
4.5 ... 7.1
4.5 ... 7.1
7.1 ... 11.2
7.1 ... 11.2
7.1 ... 11.2
11.2 ... 18.0
11.2 ... 18.0
11.2 ... 18.0
4.5 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
Q62703Q4317
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 3
Helligkeitswerte werd en m i t einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %.
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Einzelne Gruppen sind
nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe pro Farbe enthalten.
Streuung der Lichtstärke in einer Verpackungseinheit IV ma x / IV min ≤ 2.0
Streuung der Lichtstärke in einer LED IV max / IV min ≤ 3.0 (LSG T670, LSY T670),
≤ 4.0 (LSP T670, LOP T670)
Note: The standard shipping format for serial types includes a family group. Individual groups are not
available.
No packing unit / tape ever contains more than one luminous intensity group per color.
Luminous intensity ratio in one packaging unit IV max / IV min ≤ 2.0
Luminous intensity ratio in one LED IV max / IV min ≤ 3.0 (LSG T670, LSY T670),
≤ 4.0 (LSP T670, LOP T670)
LOP T670
LOP T670-J+G
LOP T670-J+H
LOP T670-J+J
LOP T670-K+G
LOP T670-K+H
LOP T670-K+J
orange / pu re
green colorle ss c lear 4.5 ... 11.2
4.5 ... 7.1
4.5 ... 7.1
4.5 ... 7.1
7.1 ... 11.2
7.1 ... 11.2
7.1 ... 11.2
1.8 ... 7.1
1.8 ... 2.8
2.8 ... 4.5
4.5 ... 7.1
1.8 ... 2.8
2.8 ... 4.5
4.5 ... 7.1
Q62703Q4319
LYG T670
LYG T670-J+J
LYG T670-J+K
LYG T670-J+L
LYG T670-K+J
LYG T670-K+K
LYG T670-K+L
LYG T670-L+J
LYG T670-L+K
LYG T670-L+L
yellow / gree n colorless cl ear 4.5 ... 18.0
4.5 ... 7.1
4.5 ... 7.1
4.5 ... 7.1
7.1 ... 11.2
7.1 ... 11.2
7.1 ... 11.2
11.2 ... 18.0
11.2 ... 18.0
11.2 ... 18.0
4.5 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
4.5 ... 7.1
7.1 ... 11.2
11.2 ... 18.0
Q62703Q4502
Typ
Type
Emissions-
farbe
Color of
Emission
Farbe der
Lichtaustritts-
fläche
Color of the
Light Emitting
Area
Lichtstärke
Luminous Intensity
IF = 10 m A
IV (mcd)
Bestellnummer
Ordering Code
color 1 color 2
2003-03-04 4
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS, LO,
LY, LG LP
Betriebstemperatur
Operating temperature range Top – 40 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 40 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 100 °C
Durchlassstrom
Forward current IF30 mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM 0.5 A
Sperrspannung1)
Reverse voltage VR12 V
Leistungsaufnahme
Power consumption Ptot 95 90 mW
Wärmewiderstand
Thermal resistance
Sperrschicht / Umgebung 1 chip on
Junction / air 2 chips on
Sperrschicht / Lötpad 1 chip on
Junction / solder point 2 chips on
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
Rth JA
Rth JA
Rth JS
Rth JS
480
650
260
430
K/W
K/W
K/W
K/W
1) für kurzzeitigen Betrieb gee ignet / suitable for short te rm application
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 5
Bezeichnung (TA = 25 °C)
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS LO LY LG LP
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 10 mA
λpeak 635 610 586 572 557 nm
Dominantwellenlänge 1) (typ.)
Dominant wavelength 1)
IF = 10 mA
λdom 628
± 6 606
± 6 590
± 6 570
± 6 560
± 6 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 10 mA
∆λ 45 40 45 25 22 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ120 120 120 120 120 Grad
deg.
Durchlassspannung 2) (typ.)
Forward voltage 2) (max.)
IF = 10 mA
VF
VF
2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 V
V
Sperrstrom (ty p . )
Reverse current (max.)
VR = 12 V
IR
IR
0.01
10 0.01
10 0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλpeak 0.11 0.12 0.10 0.11 0.11 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλdom 0.07 0.07 0.07 0.07 0.05 nm/K
Temperaturkoeffizient vonVF(typ.)
Temperature coefficient of VF
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCV -1.9 -1.9 -1.9 -1.4 -2.1 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 10 mA
ηopt 1.5 1.5 1.5 2.5 0.6 lm/W
1) Wellenlängen werden mit einer St romeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current pulse durat ion of 25 ms and a tolerance of ±1 nm.
2) Spannungswerte werden mit einer Stromeinpräged auer von 1 ms und einer Genauigkeit von ±0, 1 V ermittelt.
Voltage s are tested at a curre nt puls e duration of 1 ms and a t olerance of ±0 .1 V.
2003-03-04 6
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 10 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
%
rel
λ
OHL01697
100
80
60
40
20
0
400 450 500 550 600 650 700
nm
I
pure-green
green
yellow
orange
super-red
λ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚
OHL01660
50˚
60˚
70˚
80˚
90˚
100˚ 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 7
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(10 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
10
-1
V
pure-green
5
super-red
orange/yellow
green
OHL0214
5
I
F
F
V
0
10
1
10
2
10
5
mA
1.0 1.4 1.8 2.2 2.6 3.0 3.4
1 chip on2 chips on
mA
35
30
25
20
15
10
5
˚C0
I
F
0
OHL00241
20 40 60 80 100
T
A
temp. ambient
T
V
V (10 mA)
10-1 0
10 1012
10
mA
red
yellow
green
super-red
orange
pure-green
10 -3
5
OHL02146
F
Ι
5
-2
10
5
-1
10
0
10
1
10
ΙΙ
55
0
OHL00956
˚C0 20 40 60 80 100
5
10
15
20
25
30
35
1 chip on
2 chips on
temp. solder point
T
S
T
F
I
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 8
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 10 mA
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
yellow
green
orange
super-red
pure-green
0.0
OHL02150
˚C
A
0 20 40 60 80 100
V
V
I
I
0.4
0.8
1.2
1.6
2.0
(25 ˚C)
T
OHL01686
s10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
DI
TT
P
F
t
P
=
D
=0.005
0.01
0.02
0.05
0.2
0.5
DC
10
1
5
I
F
t
2
10
0.1
p
10
3
mA
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 9
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
Kathodenkennung: abgeschrägte Ecke
Cathode mark: bevelled edge
Gewicht / Approx. weight: 35 mg
marking
Package
GPLY6837
23
41
0.8 (0.031)
0.6 (0.024)
2.6 (0.102)
2.1 (0.083)
2.3 (0.091)
3.0 (0.118)
3.4 (0.134)
3.0 (0.118)
(2.4 (0.094))
2.1 (0.083)
1.7 (0.067) 0.9 (0.035)
0.7 (0.028)
4˚±1
0.1 (0.004) typ
1.1 (0.043)
3.3 (0.130)
3.7 (0.146)
0.5 (0.020)
0.12 (0.005)
0.18 (0.007) 0.4 (0.016)
0.6 (0.024)
CA
Circuit Diagram
C A
L Color 1 Color 2 T670
LED Emission color 1 Emission color 2 Package
Cathode: pin 1 Cathode: pin 3
2003-03-04 10
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil (nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
0
050 100 150 200 250
50
100
150
200
250
300
T
t
˚C
s
240-245 ˚C
10-40 s
183 ˚C
120 to 180 s
Defined for Preconditioning: up to 6 K/s
Ramp-down rate up to 6 K/s
Ramp-up rate up to 6 K/s
Defined for Preconditioning: 2-3 K/s
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 11
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
2003-03-04 12
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Empfohlenes Lötpaddesign IR Reflow Löten
Recommended Solder Pad IR Reflow Soldering
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
OHLPY439
Padgeometrie für
verbesserte Wärmeableitung
improved heat dissipation
Paddesign for
Lötstoplack
Solder resist
1.1 (0.043)
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
3.3 (0.130)
0.5 (0.020)
7.5 (0.295)
0.4 (0.016)
Cathode marking
Kathoden Markierung / Cu Fläche / 12 mm per pad
2
Cu-area
_
<
3.3 (0.130)
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
2003-03-04 13
Empfohlenes Lötpaddesign Wellenlöten (TTW)
Recommended Solder Pad TTW Soldering
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
Gurtung / Polarität und Lage Verpackungseinheit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø180 mm
or 8000/reel, ø330 mm
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
OHAY0583
6.1 (0.240)
2.8 (0.110)
2 (0.079)
3 (0.118)
6 (0.236)
3.5 (0.138)
1.5 (0.059)
2 (0.079)
3.5 (0.138)1 (0.039)
8 (0.315)
2.8 (0.110) 0.5 (0.020)
7.5 (0.295)
Solder resist
Lötstoplack
PCB-direction
Bewegungsrichtung
der Platine
2 (0.079)
Padgeometrie für
improved heat dissipation
verbesserte Wärmeableitung
Paddesign for
2
Cu Fläche / > 12 mm per pad
Cu-area
OHAY0093
4 (0.157)
2.9 (0.114)
1.5 (0.059) 4 (0.157)
3.6 (0.142)
3.5 (0.138)
2 (0.079)
1.75 (0.069)
8 (0.315)
CA
AC
2003-03-04 14
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670
Published by OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describe s the type of compon ent and shall not be considered as assur ed c haracteristics.
All typical data and graphs are basing on representative samples, but don’t represent the production range. If requested,
e.g. because of technical improvements, these typ. data will be changed w it hout any further notic e.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the lates t vers ion in the Internet.
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be us ed in life-support dev ic es or sys t ems 2 with the express written approval of OSRAM OS.
1 A critical c omponent is a compone nt used i n a life -support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail , it is rea so nable to assume th at the health of the user may be endangered.
Revision History: 2003-03-04 Date of change
Previous Version: 2002-09-18
Page Subjects (major changes since last revision)
3 note changed
3 luminous Intensity of LOP T670 for pure green
5 dominant wavelength (yellow)
13 graphic (taping)
5 value (wavelength yellow)
14 annotations 2002-07-23
4, 5 value (reverse voltage from 5 V to 12 V) 2002-09-18
