Fiber Optic Splitter Modules, RDJ 901 200
2 to 64 Ports Single/Dual Input PLC
28701-RDJ 901 200 Uen Rev G
Features
1x4 to1x64 standard split ratios
2x4 to 2x64 for redundancy and test
access
Wideband performance
Low insertion loss
Low back reflection
Low PDL (Polarization Dependent Loss)
Low WDL (Wavelength Dependent Loss)
Low TDL (Temperature Dependent Loss)
High output uniformity
Stable optical performance
Bend insensitive fiber G.657 A compliant
SC/APC, LC/APC, SC or LC connectors
Application
The Planar Lightwave Circuit (PLC) splitter
modules are designed to fit the Ericsson Fiber
Distribution Hubs (FDH) 1/NBD116200 and
2/NBD116200. It can also be used with 19”
splitter frames NBA 301 04, 05 in Central
Termination Point applications (centralized
splitters). The module provides u niform d i vision
of an optical signal from one or two inp ut fiber
ports to multiple output ports. The splitters are
designed to meet the requirem ents for a wide
range of fiber optic communications systems like
in PON FTTx networks.
Low loss under extreme environmental
conditions ensures stable operation. The
compact packages equipped with bend resi stant
pre-connected fiber makes them especially
suitable for fast and increm ental installation in
compact FDH cabinets.
Conformances
The modules are designed for stable
performance according to
Telcordia GR-1209, GR-1221
IEC 67153-031-3/-6.
IEC 61754-4
IEC 61754-6
IEC 61754-20
ITU-T G.657 A
ITU-T G.671 (1:16 and 1:32 splitters)
RoHS Directive
Fiber Optic Splitter Modules, RDJ 901 200
28701-RDJ 901 200 Uen Rev G Ericsson AB 2010
www.ericsson.com Cables&Interconnect
Phone: +46 10 7190000 2 (4)
Description
1xN and 2xN PLC splitters utilize silica on
silica optical waveguide technology. PLC
splitters enable thermally stable, compact
packages with wide band performance.
Fiber Ribbon
Output
Fiber Input Silica Waveguid e
Chip
1x4 PLC Device
Fiber Ribbon
Output
Fiber Input Silica Waveguid e
Chip
1x4 PLC Device
The splitters are available in configurations
with single fiber input from 1x4 to 1x64 as
well as with dual fiber inputs 2x4 to 2x32.
The pre connected cabl es has an outer
diameter of 1.6 mm.
Two types are available:
1. Short tail, 180 mm (input) / n x730 mm
(output) pre-terminated ends, suitable
for 1/NBD116200 and 3/NBD116200
2. Long tail, 900 mm (input) / n x1500 mm
(output) pre-terminated ends, suitable
for 2/NBD116200
Connector options
SC/APC, SC, LC/APC and LC
The splitters are delivered with the
connectors mounted on a clamp that also
serves as a temporary “parking lot” for
unused ports when installed in the Ericsson
FDHs.
Material
The Splitter module housing is made of
Poly Carbonate (PC). All materials are
RoHS approved.
Specifications
Optical Properties
Operating Wavelength.....
1260 ~ 1360, 1450 ~ 1650 nm
Directivity.........................>55dB
Return Loss.....................>55dB
Maximum input power.....500mW
The optical properties refer to maximum values, valid for the
entire operating wavelength band and temperature range. At
specific wavelengths and temperatures, better performance
may be obtained. Detailed information is available upon
request.
Fiber Type
Bend resistant singlemo de fiber according to
ITU-T G.657 A (G.652 D compliant )
Temperature and Humidity
Operation.........................–40 to +85ºC
Transport and storage.....–40 to +85ºC
Storage rel. humidity ....... 20-95 (%RH)
Size and weight
Weight: approx. 120 g (average)
Dimensions (DxWxH) : 90x10x126mm
(splitters < n x 64)
Dimensions (DxWxH) : 90x20x126mm
(splitters > n x 64)
Color: Light grey
Split
ratio Insertion loss
(max) dB Uniformity*
(max) dB PDL
(max) dB
1:2 4.0 0.6 < 0.3
1:4 7.6 0.8 < 0.3
1:8 11 1.0 < 0.3
1:16 14.5 1.3 < 0.3
1:24 16.5 1.6 < 0.3
1:32 18.0 1.8 < 0.4
1:64 21.5 2.5 < 0.4
2:2 4.3 0.9 < 0.4
2:4 7.9 1.5 < 0.4
2:8 11.5 1.7 < 0.4
2:16 15.1 2.1 < 0.4
2:32 18.7 2.5 < 0.4
2:64 22.3 3.0 < 0.4
*Including wavelength dependent loss, polarization
dependent loss and temperature dependent loss defined by
the operation wavelength band and the operation temperature
range.
Above parameters for splitter components excluding
connectors.
Fiber Optic Splitter Modules, RDJ 901 200
28701-RDJ 901 200 Uen Rev G Ericsson AB 2010
www.ericsson.com Cables&Interconnect
Phone: +46 10 7190000 3 (4)
Ordering information
For ordering information also refer to
product data sheets:
28701-1/NBD116200 FDH 64
28701-2/NBD116200 FDH 288
28701-3/NBD116200 FDH 96 underground
Note that the splitters are available in two
main configurations with lo ng tail or short
tail and with single fiber input or dual fiber
input.
Splitters with high performance grade,
according to ITU-T G.671, are available
upon request.
Splitter modules, short tail 180/730mm
Suitable for FDH 1/NBD116200 and 3/NBD116200
RDJ 901200/81 1:2 splitter, SC/APC
RDJ 901200/82 1:2 splitter, SC
RDJ 901200/83 1:2 splitter, LC/APC
RDJ 901200/84 1:2 splitter, LC
RDJ 901200/5 1:8 splitter, SC/APC
RDJ 901200/6 1:8 splitter, SC
RDJ 901200/7 1:8 splitter, LC/APC
RDJ 901200/8 1:8 splitter, LC
RDJ 901200/13 1:16 splitter, SC/APC
RDJ 901200/14 1:16 splitter, SC
RDJ 901200/15 1:16 splitter, LC/APC
RDJ 901200/16 1:16 splitter, LC
RDJ 901200/21 1:24 splitter, SC/APC
RDJ 901200/22 1:24 splitter, SC
RDJ 901200/23 1:24 splitter, LC/APC
RDJ 901200/24 1:24 splitter, LC
RDJ 901200/29 1:32 splitter, SC/APC
RDJ 901200/30 1:32 splitter, SC
RDJ 901200/31 1:32 splitter, LC/APC
RDJ 901200/32 1:32 splitter, LC
RDJ 901200/37 1:64 splitter, SC/APC
RDJ 901200/38 1:64 splitter, SC
RDJ 901200/39 1:64 splitter, LC/APC
RDJ 901200/40 1:64 splitter, LC
Splitter modules, short tail 180/730mm
Suitable for FDH 1/NBD116200 and 3/NBD116200
RDJ 901200/89 2:2 splitter, SC/APC
RDJ 901200/90 2:2 splitter, SC
RDJ 901200/91 2:2 splitter, LC/APC
RDJ 901200/92 2:2 splitter, LC
RDJ 901200/49 2:8 splitter, SC/APC
RDJ 901200/50 2:8 splitter, SC
RDJ 901200/51 2:8 splitter, LC/APC
RDJ 901200/52 2:8 splitter, LC
RDJ 901200/57 2:16 splitter, SC/APC
RDJ 901200/58 2:16 splitter, SC
RDJ 901200/59 2:16 splitter, LC/APC
RDJ 901200/60 2:16 splitter, LC
RDJ 901200/65 2:32 splitter, SC/APC
RDJ 901200/66 2:32 splitter, SC
RDJ 901200/67 2:32 splitter, LC/APC
RDJ 901200/68 2:32 splitter, LC
RDJ 901200/73 2:64 splitter, SC/APC
RDJ 901200/74 2:64 splitter, SC
RDJ 901200/75 2:64 splitter, LC/APC
RDJ 901200/76 2:64 splitter, LC
Fiber Optic Splitter Modules, RDJ 901 200
28701-RDJ 901 200 Uen Rev G Ericsson AB 2010
www.ericsson.com Cables&Interconnect
Phone: +46 10 7190000 4 (4)
Splitter modules, long tail 900/1500mm
Suitable for FDH 2/NBD116200
RDJ 901200/85 1:2 splitter, SC/APC
RDJ 901200/86 1:2 splitter, SC
RDJ 901200/87 1:2 splitter, LC/APC
RDJ 901200/88 1:2 splitter, LC
RDJ 901200/1 1:4 splitter, SC/APC
RDJ 901200/2 1:4 splitter, SC
RDJ 901200/3 1:4 splitter, LC/APC
RDJ 901200/4 1:4 splitter, LC
RDJ 901200/9 1:8 splitter, SC/APC
RDJ 901200/10 1:8 splitter, SC
RDJ 901200/11 1:8 splitter, LC/APC
RDJ 901200/12 1:8 splitter, LC
RDJ 901200/17 1:16 splitter, SC/APC
RDJ 901200/18 1:16 splitter, SC
RDJ 901200/19 1:16 splitter, LC/APC
RDJ 901200/20 1:16 splitter, LC
RDJ 901200/25 1:24 splitter, SC/APC
RDJ 901200/26 1:24 splitter, SC
RDJ 901200/27 1:24 splitter, LC/APC
RDJ 901200/28 1:24 splitter, LC
RDJ 901200/33 1:32 splitter, SC/APC
RDJ 901200/34 1:32 splitter, SC
RDJ 901200/35 1:32 splitter, LC/APC
RDJ 901200/36 1:32 splitter, LC
RDJ 901200/41 1:64 splitter, SC/APC
RDJ 901200/42 1:64 splitter, SC
RDJ 901200/43 1:64 splitter, LC/APC
RDJ 901200/44 1:64 splitter, LC
Splitter modules, long tail 900/1500mm
Suitable for FDH 2/NBD116200
RDJ 901200/93 2:2 splitter, SC/APC
RDJ 901200/94 2:2 splitter, SC
RDJ 901200/95 2:2 splitter, LC/APC
RDJ 901200/96 2:2 splitter, LC
RDJ 901200/45 2:4 splitter, SC/APC
RDJ 901200/46 2:4 splitter, SC
RDJ 901200/47 2:4 splitter, LC/APC
RDJ 901200/48 2:4 splitter, LC
RDJ 901200/53 2:8 splitter, SC/APC
RDJ 901200/54 2:8 splitter, SC
RDJ 901200/55 2:8 splitter, LC/APC
RDJ 901200/56 2:8 splitter, LC
RDJ 901200/61 2:16 splitter, SC/APC
RDJ 901200/62 2:16 splitter, SC
RDJ 901200/63 2:16 splitter, LC/APC
RDJ 901200/64 2:16 splitter, LC
RDJ 901200/69 2:32 splitter, SC/APC
RDJ 901200/70 2:32 splitter, SC
RDJ 901200/71 2:32 splitter, LC/APC
RDJ 901200/72 2:32 splitter, LC
RDJ 901200/77 2:64 splitter, SC/APC
RDJ 901200/78 2:64 splitter, SC
RDJ 901200/79 2:64 splitter, LC/APC
RDJ 901200/80 2:64 splitter, LC