1
www.power-one.com
Edition 2/9.2002
• Magnetic feedback for single output models
• Short circuit protection
• Industry standard 2" x 1" case with 10.5 mm
profile
IMX 7 Series 7 Watt DC-DC Converters
Wide input voltage ranges up to 150 V DC
1 or 2 outputs up to 48 V DC
1500...2500 V DC I/O electric strength test
Selection chart
Output 1 Output 2 Input voltage Type Options1, 2
U
o nom
I
o nom
U
o nom
I
o nom
U
i
[V DC] [A] [V DC] [mA] [V DC]
3.3 1.5 - - 8.4...36 20 IMX 7-03-9 -8, C, Z
3.3 1.5 - - 16.8...75 40 IMX 7-03-9 3-8, C, Z
3.3 1.5 - - 40...121 70 IMX 7-03-9 -8
3.3 1.5 - - 60...150 110 IMX 7-03-9 -8
5.1 1.2 - - 8.4...36 20 IMX 7-05-9 -8, C, Z
5.1 1.2 - - 16.8...75 40 IMX 7-05-9 3-8, C, Z
5.1 1.2 - - 40...121 70 IMX 7-05-9 -8
5.1 1.2 - - 60...150 110 IMX 7-05-9 -8
12 0.5 - - 8.4…36 20 IMX 7-12-9C -8
12 0.6 - - 16.8…75 40 IMX 7-12-9C 3-8
15 0.4 - - 8.4…36 20 IMX 7-15-9C -8
15 0.48 - - 16.8…75 40 IMX 7-15-9C 3-8
24 0.26 - - 8.4…36 20 IMX 7-24-9C -8
24 0.3 - - 16.8…75 40 IMX 7-24-9C 3-8
5 0.6 5 0.6 8.4...36 20 IMX 7-05-05-9 -8, C, Z
5 0.7 5 0.7 16.8...75 40 IMX 7-05-05-9 3-8, C, Z
5 0.7 5 0.7 40...121 70 IMX 7-05-05-9 -8
5 0.7 5 0.7 60...150 110 IMX 7-05-05-9 -8
12 0.25 12 0.25 8.4...36 20 IMX 7-12-12-9 -8, C, Z
12 0.3 12 0.3 16.8...75 40 IMX 7-12-12-9 3-8, C, Z
12 0.3 12 0.3 40...121 70 IMX 7-12-12-9 -8
12 0.3 12 0.3 60...150 110 IMX 7-12-12-9 -8
15 0.2 15 0.2 8.4...36 20 IMX 7-15-15-9 -8, C, Z
15 0.24 15 0.24 16.8...75 40 IMX 7-15-15-9 3-8, C, Z
15 0.24 15 0.24 40...121 70 IMX 7-15-15-9 -8
15 0.24 15 0.24 60...150 110 IMX 7-15-15-9 -8
24 0.13 24 0.13 8.4...36 20 IMX 7-24-24-9 -8, Z
24 0.15 24 0.15 16.8...75 40 IMX 7-24-24-9 3-8, Z
24 0.15 24 0.15 40...121 70 IMX 7-24-24-9 -8
24 0.15 24 0.15 60...150 110 IMX 7-24-24-9 -8
1 For minimum order quantity and lead time contact Power-One.
2 Option C and Z exclude each other.
3 Operation at lower input voltage possible:
P
o approx. 80% of
P
o nom at
U
i min = 14.4 V
LGA
2
www.power-one.com
Edition 2/9.2002
Board Mountable
IMX 7 Series
Input
Input voltage range 20 IMX 7 8.4...36 V DC
40 IMX 7 16.8...75 V DC
70 IMX 7 40...121 V DC
110 IMX 7 60...150 V DC
Output
Output voltage setting accuracy
U
i nom
,
50%
l
o nom, single output models ±0.5%
U
o nom
U
i nom
,
50%
l
o nom, double outp., main/aux. outp. ±1% /±1.2 %
U
o nom
Minimum load recommended for double output models 10%
l
o nom
Line/load regulation
U
i min
...U
i max, 5 0%
l
o nom, single output models ±1%
U
o nom
Line regulation
U
i nom , 50%
l
o nom, double output models ±1%
U
o nom
Load regulation
U
i nom, 10...100%
l
o nom, double outp. models, main outp. ±3%
U
o nom
tracking output ±3%
U
o nom
Output voltage switching noise
U
i nom , 0...100%
l
o nom, peak-peak, total max. 1.5%
U
o nom
Efficiency
U
i nom ,
l
o nom up to 84%
Control and protection
Input protection suppressor diode
Overload protection
U
i min
...U
i max, fully protected, hiccup mode
No-load protection
Remote shut down TTL-compatible inhibit input disabled with ≥2.4 V
Trim input for
U
o
Safety and EMC
Electric strength test voltage I/O (20/40/70/110 IMX7) 1500/1500/2000/2500 V DC
Electromagnetic interference with external filter class B
Environmental
Operating ambient temperature
U
i nom ,
l
o nom –40...71°C
Storage temperature non operational –40...100°C
Relative humidity non condensing 93%
MTBF GB 40°C, MIL-HDBK-217F, N2 1'650'000 h
Options
Extended temperature range –40...85°C, ambient, operating -8
Open frame without case Z
C-pinout C
Accessories
DIN and chassis mounting bracket
3
www.power-one.com
Edition 2/9.2002
Mechanical data
Tolerances ±0.3 mm (0.012") unless otherwise indicated.
European
Projection
IMX 7
50.8 (2")
3.81(0.15")
3.81(0.15")
3.81(0.15")
5 x 3.81
(0.15")
20.3 (0.8")
3 x 5.08 (0.2")
PT 2.2
self tapping screws
1
410
14
0.8 × 1.2 (0.03 x 0.05") Pins
∅ 1.6 (0.06") PCB holes
3.4 (0.13")
45.7 (1.8")
25.4 (1")
4.6 (0.18")
S09030
Measuring point
of case temperature
T
C
0.8 (0.3")
09032
3.4 (0.13")
35.5 (1.4")
15.2 (0.6")
25.4 (1")
5.8 (0.2")
1
2
3
4
5
∅ 1 (0.04") Pins
∅ 1.2 (0.05") PCB holes
0.5(0.02")
50.8 (2")
Measuring point of
case temperature
T
C
12.5
(0.49") 20.3 (0.8")
∅ 1(0.04")
IMX 7 (option C)
IMX 7 (option Z)
43.2 (1.7")
S90002
48 (1.9")
5 x 3.81
(0.15")
1.27 (0.05")
23 (0.9")
8.25
(0.32")
3 x 5.08
(0.2")
1
410
14
3.5 (0.14")
0.8 (0.3")
0.8 × 1.2 (0.03 x 0.05") Pins
∅ 1.6 (0.06") PCB holes
IMX 7 Series 7 Watt DC-DC Converters
4
www.power-one.com
Edition 2/9.2002
Pin allocation IMX 7 standard and Z Option
Pin Single output Dual output
1Vi+ Vi+
2Vi–Vi–
3i i
4 n.c. R (Trim)
10 Vo–Vo1–
11 Vo+ Vo1+
12 Vo–Vo2–
13 R Vo2+
14 n.c. n.c.
C pinout (option C)
Pin Single output Dual output
1Vi+ Vi+
2Vi–Vi–
3Vo+ Vo+
4 no pin Go
5Vo–Vo–
Board Mountable
IMX 7 Series
