Model RFP-100-XXAE Surface Mount Attenuator 100 Watts General Specifications Resistive Element Substrate Cover Mounting Flange Features: * DC - 2.5GHz * 100 Watts * BeO Ceramic * Welded Silver Leads * Non-Nichrome Resistive Element * Low VSWR * 100% Tested Lead(s) Operating Temperature Thick film Beryllium Oxide ceramic Alumina ceramic Copper nickel plated per QQ-N-290 99.9% pure silver (0.005" thk.) -55 to +125C (see chart) Tolerance is 0.010", unless otherwise specified. Operating temperature is 55C to +150C (see chart). Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Lead length 0.150" minimum. Electrical Specifications Attenuation Value: Frequency Range: Power: 1, 2, 3, 4, 5, 6, 9, 10, 20 or 30dB DC - 2.5 GHz 100 Watts Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing Dimensions given in inches. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-100-XXAE Specifications: PART NUMBER ATTENUATION(dB) TOL. (dB) POWER (WATTS) VSWR FREQ (GHZ) RFP-100-1AE 1 0.40 100 1.45:1 1.0 RFP-100-2AE 2 0.40 100 1.40:1 1.0 RFP-100-3AE 3 0.40 100 1.35:1 1.0 RFP-100-4AE 4 0.30 100 1.30:1 1.0 RFP-100-5AE 5 0.30 100 1.25:1 1.0 RFP-100-6AE 6 0.30 100 1.20:1 1.0 RFP-100-9AE 9 0.30 100 1.20:1 1.0 RFP-100-10AE 10 1.20 100 1.25:1 2.0 RFP-100-20AE 20 0.50 100 1.20:1 2.5 RFP-100-30AE 30 2.00 100 1.30:1 2.0 Power De-rating: USA/Canada: Toll Free: Europe: Suggested Mounting Procedure: (315) 432-8909 (801) 544-2414 +44 2392-232392