GT3A Series Timers
G-14 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
GT3A Series — Analog Timers
GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6
Specifications
Operation Multi-mode Multi-mode with inputs (11 pins)
Time Range 0.05s to 180 hours
Rated Voltage 100 to 240V AC, 50/60Hz
12V DC
24V AC, 50/60Hz / 24V DC
Contact Ratings 125V AC/250V AC, 3A;
30V DC, 1A (resistive load)
125V AC/250V AC, 5A;
30V DC, 5A (resistive load)
Minimum Applicable
Load 5V, 10mA (reference value)
Voltage Tolerance AF20 (100V AC): 85 to 264V AC
AD24: 20.4 to 26.4V AC/21.6 to 26.4V DC
D12: 10.8 to 13.2V DC
Error ±0.2%, ±10 msec (repeat, voltage, temperature)
Setting Error ±10% maximum
Reset Time 60msec maximum
Insulation Resistance 100MΩ minimum
Dielectric Strength Between power and output terminals: 2,000V AC, 1 minute
Between contacts of different poles: 2,000V AC, 1 minute
Between contacts of the same pole: 750V AC, 1 minute
Power Consumption
(approximate)
Delayed SPDT Delayed SPDT +
instantaneous SPDT Delayed DPDT Delayed DPDT
10.8VA
(200V AC, 60Hz)
13.5VA
(200V AC, 60Hz)
14.4VA
(200V AC, 60Hz)
4.7VA (100V AC, 60Hz),
14.4VA (200V AC, 60Hz)
–
12VDC/1W 12VDC/1.1W 12VDC/0.8W
24VDC/0.7W
24VAC/1.2VA
24VDC/0.6W
24VAC/1.3VA
24VDC/0.6W
24VAC/1.3VA
Mechanical Life 10,000,000 operations minimum 5,000,000 operations minimum
Electrical LIfe 50,000 operations minimum (rated load) 100,000 operations minimum (rated load)
Weight (approximate) 63g 73g 79g 80g
Vibration Resistance 100m/sec2 (approximate 10G)
Shock Resistance Operating extremes: 100m/sec2 (approximate 10G)
Damage limits: 500m/sec2 (approximate 50G)
Operating Temperature –10 to +50°C
Operating Humidity 45 to 85% RH
Storage Temperature –30 to +80°C
Housing Color Gray
Key features of the GT3A series include:
• 4 selectable operation modes on each model
• External start, reset, and pause inputs
• Panel mount or socket mount
• Large variety of timing functions
• Power and output status indicating LEDs
UL, c-uL Listed
File No. E55996
GT3A Table of Contents
Specifications — G-14
Part Number List — G-15
Timing Diagrams/Schematics — G-16
Instructions: Setting Timer — G-22
GT3 Accessories — G-48
GT3 Instructions: Wiring Inputs — G-50
GT3 Dimensions — G-52
Timing Diagrams Overview — G-4
Timers GT3A Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-15
G
Timers
Part Numbers: GT3A-1, -2, -3
Part Numbers: GT3A-4, -5, -6
Mode Of
Operation Rated Voltage Code Time
Range Output Contact Complete Part No.
8-Pin 11-Pin
A: ON-delay 1
B: Interval 1
C: Cycle 1
D: Cycle 3
AF20: 100 to 240V AC (50/60Hz)
0.05s.
to
180
hours
250V AC, 3A,
30V DC, 1A
(resistive load)
Delayed SPDT GT3A-1AF20 GT3A-1EAF20
AF20: 100 to 240V AC (50/60Hz)
D12: 12V DC
AD24: 24V AC (50/60Hz)/24V DC
Delayed SPDT +
Instantaneous
SPDT
GT3A-2AF20 GT3A-2EAF20
GT3A-2D12 GT3A-2ED12
GT3A-2AD24 GT3A-2EAD24
240V AC, 5A,
24V DC, 5A
(resistive load)
Delayed DPDT
GT3A-3AF20 GT3A-3EAF20
GT3A-3D12 GT3A-3ED12
GT3A-3AD24 GT3A-3EAD24
Mode of
Operation Rated Voltage Code Time
Range Output Contact Input Complete Part No.
A (11-pin) B (11-pin)
A: ON-Delay 2
B: Cycle 2
C: Signal ON/OFF-Delay 1
D: Signal OFF-Delay 1
AF20: 100 to 240V AC (50/60Hz)
D12: 12V DC
AD24: 24V AC (50/60Hz)/24V DC
0.05
seconds
to
180 hours
250V AC, 5A,
24V DC, 5A
(resistive load)
Delayed
DPDT
Start
Reset
Gate
GT3A-4AF20 GT3A-4EAF20
GT3A-4D12 GT3A-4ED12
GT3A-4AD24 GT3A-4EAD24
A: Interval 2
B: One-Shot Cycle
C: Signal ON/OFF-Delay 2
D: Signal OFF-Delay 2 AF20: 100 to 240V AC (50/60Hz)
AD24: 24V AC (50/60Hz)/24V DC
GT3A-5AF20 GT3A-5EAF20
GT3A-5AD24 GT3A-5EAD24
A: One-Shot
B: One-Shot ON-Delay
C: One-Shot 2
D: Signal ON/OFF-Delay 3
GT3A-6AF20 GT3A-6EAF20
GT3A-6AD24 GT3A-6EAD24
Part Number List
1. For wiring sc hematics and timing diagr ams for GT3A-1, -2, -3, see pag es G-16, G-17, or G-18 r espectively.
2. For more details about time ranges, see instructions on page G-22.
3. For socket and accessory part numbers, see page G-48.
4. For wiring schematics and timing diagrams GT3A-4,-5,-6, see pages G-19, G-20, and G-21 respectively.
5. For more details about time ranges, see instructions on page G-22.
6. A (11-pin) and B (11-pin) differ in the way inputs are wired.
7. For socket and accessory part numbers, see page G-48.
8. For the timing diagrams overview, see page G-4.
GT3A Series Timers
G-16 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Delayed SPDT
ON-Delay 1
Interval 1
Cycle 1
(OFF first)
Cycle 3
(ON first)
Timing Diagrams/Schematics
GT3A- 1 Timing Diagrams
Operation
Mode Selection 1
2
6
5
7
8
4
3
POWER
(+)(-)
1
2
6
57
84
3
POWER
(+)(-)
9
10
11
8-Pin 11-Pin
A
MODE
OUT
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
Set Time
Contact
B
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
C
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
D
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
Timers GT3A Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-17
G
Timers
Delayed SPDT + Instantaneous SPDT
ON-Delay 1
Interval 1
Cycle 1
(OFF first)
Cycle 3
(ON first)
GT3A- 2 Timing Diagrams
Operation
Mode Selection 1
2
6
5
7
8
4
3
POWER
(+)(-) 2
6
57
84
3
POWER
(+)(-)
9
10
11
1
8-Pin 11-Pin
A
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
B
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
C
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
D
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
5-8 (8p)
8-11 (11p)
(NC)
6-8 (8p)
9-11 (11p)
(NO)
POWER
OUT
Set Time
Contact
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
GT3A Series Timers
G-18 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Delayed DPDT
ON-Delay 1
Interval 1
Cycle 1
(OFF first)
Cycle 3
(ON first)
GT3A-3 Timing Diagrams
Operation
Mode Selection 1
2
6
5
7
8
4
3
POWER
(+)(-) 2
6
57
84
3
POWER
(+)(-)
9
10
11
1
8-Pin 11-Pin
A
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
(NC)1-4, 8 -11(11p)
(NO)
POWER
OUT
Set Time
Contact
1-4, 5-8 (8p)
1-3, 9-11(11p)
1-3, 6-8 (8p)
B
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
POWER
OUT
Set Time
Contact
(NC)1-4, 8 -11(11p)
(NO)
1-4, 5-8 (8p)
1-3, 9-11(11p)
1-3, 6-8 (8p)
C
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
POWER
OUT
Set Time
Contact
(NC)1-4, 8 -11(11p)
(NO)
1-4, 5-8 (8p)
1-3, 9-11(11p)
1-3, 6-8 (8p)
D
MODE
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
POWER
OUT
Set Time
Contact
(NC)1-4, 8 -11(11p)
(NO)
1-4, 5-8 (8p)
1-3, 9-11(11p)
1-3, 6-8 (8p)
Timers GT3A Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-19
G
Timers
Delayed DPDT
ON-Delay 2
Cycle 2
Signal ON/OFF-Delay 1
Signal OFF-Delay 1
GT3A-4 Timing Diagrams
Operation
Mode Selection
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
(A Type)
(Contact Input) (Transistor Input) (B Type) Note: T = Set time
Ta = Shorter
T = T' + T"
than set time
A
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
TTa T' T"
Note: While the gate input is on
during time-delay operation, the
POWER indicator flash rate slows down.
B
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No.
O
peration
TT’’
T T
T T T T Ta T T T T’ T T T T T
C
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
It
em
T
erm
i
na
l
N
o.
O
pera
ti
on
TTTa TTa T T T T’’ Ta
D
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
TTa Ta TT’ Ta
GT3A Series Timers
G-20 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
.
Delayed DPDT
Interval 2
One-Shot Cycle
Signal ON/OFF-Delay 2
Signal OFF-Delay 2
GT3A- 5 Timing Diagrams
Operation
Mode Selection
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
(A Type)
(Contact Input) (Transistor Input) (B Type)
Note: T = Set time
Ta = Shorter
T = T’ + T”
than set time
A
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
TTa T' T"
B
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
T T T' T
TTa T"
C
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
T T Ta T
TTa Ta T' T" Ta
D
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
T TTa T'
Ta T"
Timers GT3A Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-21
G
Timers
Delayed DPDT
One-Shot 1
One-Shot ON-Delay
One Shot 2
Signal
ON/OFF-Delay 3
GT3A- 6 Timing Diagrams
Operation
Mode Selection
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
(A Type)
(Contact Input) (Transistor Input) (B Type) Note: T = Set time
Ta = Shorter
T = T' + T"
than set time
A
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
Ta T'TaTT"
Ta
B
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
T T'TTaT T T"
C
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
T T'TTa T"
D
MODE
2-10 (POWER)
2-6 (A)
5-7 (B)ON or L
2-7 (A)
6-7 (B)ON or L
2-5 (A) ON or L
1-4
8-11(NC)
1-3
9-11(NO)
POWER
OUT
Set Time
Indicator
Delayed
Contact
Input
Start
Reset
Gate
Power
Item Terminal No. Operation
TTaTT' T"’ Ta Ta T
GT3A Series Timers
G-22 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Step 1. Desired Mode of Operation Selection Remarks
Select the desired mode
of operation.
For Timers Mode of Operation ➀ Operation Mode Selector
The desired operation mode
can be selected from the A, B,
C, and D modes using the Oper-
ation Mode Selector. Change
the operation mode from A to
B, C, and D in turn by turning
the operation mode selector
clockwise using a flat screw-
driver which is a maximum of
0.156” (4mm) wide. The
selected mode is displayed
in the window.
GT3A-1
GT3A-2
GT3A-3
ON-delay 1 A
Interval 1 B
Cycle 1 C
Cycle 3 D
GT3A-4
ON-delay 2 A
Cycle 2 B
Signal ON/OFF-delay 1 C
Signal OFF-delay 1 D
GT3A-5
Interval 2 A
One-shot cycle B
Signal ON/OFF-delay 2 C
Signal OFF-delay 2 D
GT3A-6
One-shot 1 A
One-shot ON-delay B
One-shot 2 C
Signal ON/OFF-delay 3 D
Step 2. Desired Time Range Selection Remarks
Select the time range
that contains the desired
time period.
Time Ranges ➁Dial Selector ➂Time Range Selector
The desired time range is
selected by setting both
➁Dial Selector and
➂Time Range Selector.
0.05 seconds to 1 second 0-1
1S
0.05 seconds to 3 seconds 0-3
0.05 seconds to 6 seconds 0-6
0.15 seconds to 18 seconds 0-18
0.1 seconds to 10 seconds 0-1
10S
0.3 seconds to 30 seconds 0-3
0.6 seconds to 60 seconds 0-6
1.8 seconds to 180 seconds 0-18
6 seconds to 10 minutes 0-1
10M
18 seconds to 30 minutes 0-3
36 seconds to 60 minutes 0-6
108 seconds to 180 minutes 0-18
6 minutes to 10 hours 0-1
10H
18 minutes to 30 hours 0-3
36 minutes to 60 hours 0-6
108 minutes to 180 hours 0-18
Step 3. Selection
Set the precise period of time desired by using the ➃ Setting Knob.
Instructions: Setting GT3A Series Timers
POWER Indicator
(flashes during
time-delay period)
➃ Setting Knob
➂ Time Range Selector
1S, 10S, 10M, 10H
➁ Dial Selector
0-1, 0-3, 0-6, 0-18
➀ Operation Mode
Selector
A, B, C, D
Timed OUT Indicator
A
Timers
GT3D Series
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-23
G
Timers
GT3D Series — Digital Timers
GT3D-2 GT3D-3 GT3D-4 GT3D-8
Specifications
Operation System
Solid state CMOS circuitry
Operation
Multi-mode Multi-mode.
one-shot output
Time Range
0.01s to 99.9 hours
Rated Voltage
100 to 240V AC (50/60Hz), 24V AC (50/60Hz)/24V DC
Contact Ratings
125V AC/250V AC, 3A;
30V DC/1A (resistive load)
125V AC/250V AC, 5A;
30V DC/5A (resistive load)
Contact Form
Delayed SPDT +
instantaneous SPDT Delayed DPDT Delayed DPDT Delayed DPDT
Minimum Applicable Load
5V, 10mA (reference value)
Voltage Tolerance
AF20 (100–240V AC): 85 to 264V AC
AD24 (AC): 20.4 to 26.4V AC
AD24 (DC): 21.6 to 26.4V DC
Error
±0.3% ±50ms (voltage, repeat, and temperature)
Setting Error
±0.5% ±50ms
Reset Time
60ms maximum
Insulation Resistance
100M
Ω
minimum
Dielectric Strength
Between power and output terminals: 2,000V AC, 1 minute
Between contacts of different poles: 2,000V AC, 1 minute
Between contacts of the same pole: 750V AC, 1 minute
Power
Consumption
(approximate)
AF20
11.8VA 11.6VA 3.7VA (100V AC, 60Hz)
11.6VA (200V AC, 60Hz)
AD24 AC/DC
1VA/0.8W 2.1VA/0.9W 2.1VA /0.9W
Mechanical Life
10,000,000 operations
minimum 5,000,000 operations minimum
Electrical Life
(at rated load)
50,000 operations mini-
mum 100,000 operations minimum
Outputs Relay
250V AC, 3A, 30V DC, 1A
(resistive load)
240V AC/, 24V DC, 5A
(resistive load)
Vibration Resistance
100N (approximate 10G)
Shock Resistance
Operating extremes: 100N (approximate 10G)
Damage limits: 500N (approximate 50G)
Operating Temperature
–10 to +50°C
Storage Temperature
–30 to +80°C
Operating Humidity
45 to 85% RH
Weight
(approximate)
70g 75g 76g
Housing Color
Gray
Key features of the GT3D series include:
• Precise time setting using digital thumbwheel switches
• Elapsed or time remaining LED display
•6 time ranges, 16 timing functions
•Time delays up to 99.9 hours
UL Recognized
File No.E55996
Cert. No.
BL9801133323911 (LVD)
E9971113332388 (EMC)
CSA Certified
File No.LR58183
LR96764
LR83814
GT3D Table of Contents
Specifications — G-23
Part Number List — G-24
Timing Diagrams/
Schematics — G-25
Instructions:
Setting Timer — G-33
GT3 Accessories — G-48
GT3 Instructions:
Wiring Inputs — G-50
GT3 Dimensions — G-52
Timing Diagrams
Overview — G-4
GT3D Series
Timers
G-24
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Part Numbers: GT3D-1/GT3D-2/GT3D-3
Part Numbers: GT3D-4
Part Numbers: GT3D-8
Mode of Operation Time
Range Output Contact Rated Voltage Code Complete Part No.
8-Pin 11-Pin
1-A: ON-delay 1
1-B: Interval 1 first
1-C: Cycle 1 (OFF first)
1-D: Cycle 3 (ON first)
0.01s to
99.9
hours
250V AC, 3A,
30V DC, 1A
(resistive load)
Delayed SPDT
+ instantaneous SPDT
100 to 240V AC (50/60Hz) GT3D-2AF20 GT3D-2EAF20
24V AC/DC GT3D-2AD24 —
240V AC/,
24V DC, 5A
(resistive load)
Delayed DPDT
100 to 240V AC (50/60Hz) GT3D-3AF20 GT3D-3EAF20
24V AC/DC GT3D-3AD24 —
Mode of Operation Time
Range Output Contact Rated Voltage Code Complete Part No.
A (11-pin) B (11-pin)
1-A: ON-delay 1
1-B: Interval 1 first
1-C: Cycle 1 (OFF first)
1-D: Cycle 3 (ON first)
2-A: ON-delay 2
2-B: Cycle 2
2-C: Signal ON/OFF-delay 1
2-D: Signal OFF-delay 1
2-E: Interval 2
2-F: One-shot cycle
3-A: Signal ON/OFF-delay 2
3-B: Signal OFF-delay 2
3-C: One-shot 1
3-D: One-shot ON-delay
3-E: One-shot 2
3-F: Signal ON/OFF-delay 3
0.01s to
99.9
hours
240V AC/24V DC,
5A
(resistive load)
Delayed DPDT
100 to 240V AC (50/60Hz) GT3D-4AF20 GT3D-4EAF20
24V AC/DC GT3D-4AD24 —
Mode of
Operation
Time
Range Output Contact Rated Voltage Code Complete Part No. (11-pin)
1: ON-delay one-shot 1
2: Cycle one-shot
3: ON-delay one-shot 2
0.01s to
99.9
hours
240V AC/24V DC,
5A
(resistive load)
Delayed DPDT
100 to 240V AC (50/60Hz) GT3D-8AF20
24V AC/DC GT3D-8AD24
Part Number List
1. For wiring schematics and timing diagrams GT3D, see pages G-25 to G-32.
2. For more details about time ranges, see instructions on page G-33.
3. A (11-pin) and B (11-pin) differ in the way inputs are wired.
4. For socket and accessory part numbers, see page G-48.
5. For timing diagrams overview, see page G-4.
Timers
GT3D Series
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-25
G
Timers
Contact Delayed SPDT + Instantaneous SPDT
ON-Delay 1
Interval 1
Cycle 1
(OFF first)
Cycle 3
(ON first)
GT3D-2 Timing Diagrams
1
2
6
5
7
8
4
3
POWER
(+)(-) 2
6
57
84
3
POWER
(+)(-)
9
10
11
1
8-Pin 11-Pin
1 A
A1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
1 B
B1—
—
Time Remaining
Time Elapsed
It
em
Power
Delayed
Indicator
T
erm
i
na
l
N
o.
O
pera
ti
on
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
1 C
C1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No.
O
peration
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
1 D
D1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
(NC)
(NO)
Instan-
taneous
Contact
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
GT3D Series
Timers
G-26
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Contact Delayed DPDT
ON-Delay 1
Interval 1
Cycle 1
(OFF first)
Cycle 3
(ON first)
GT3D-3 Timing Diagrams
Operation
Mode Selection
1
2
6
5
7
8
4
3
POWER
(+)(-) 2
6
57
84
3
POWER
(+)(-)
9
10
11
1
8-Pin 11-Pin
1 A
A1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
1 B
B1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
1 C
C1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
1 D
D1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
UP
Set Time
Contact
OUT
DOWN
Digital
Time
Display
1-4, 5-8 (8p)
1-4, 8-11 (11p)
(NC)
1-3, 6-8 (8p)
1-3, 9-11 (11p)
(NO)
Timers
GT3D Series
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-27
G
Timers
These timers require a start input. A gate and reset input are optional. Inputs are controlled by external pushbuttons. Reset occurs when the power is removed or
when the reset input is supplied. The gate signal can be used to interrupt (freeze) timer functions. Timer functions resume when the gate input is removed. B style
timers are not equipped for gate input.
GT3D-4
Delayed DPDT
ON-Delay 1
Interval 1
GT3D-4 Timing Diagrams
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
(A Type)
(Contact Input) (Transistor Input)
(B Type)
(Contact Input) (Transistor Input)
1 A
A1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
T
1 B
B1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
T
GT3D Series
Timers
G-28
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Cycle 1
(OFF first)
Cycle 3
(ON first)
ON-Delay 2
GT3D-4 Timing Diagrams, continued
1 C
C1—
—
Time Remainin
g
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
TT T T T T
1 D
D1—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
TT T T T T
2 A
A2—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
TTa T’ T’
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
Timers
GT3D Series
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-29
G
Timers
Cycle 2
Signal ON/OFF-Delay 1
Signal OFF-Delay 1
Interval 2
GT3D-4 Timing Diagrams, continued
2 B
B2—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
TTa
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
T T T T T T T T T T T’ T’’ T T
2 C
C2—
—
Time Remaining
Time Elapsed
2 D
D2—
—
Time Remaining
Time Elapsed
2 E
E2—
—
Time Remaining
Time Elapsed
GT3D Series Timers
G-30 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
One-Shot Cycle
Signal ON/OFF-Delay 2
Signal OFF-Delay 2
One-Shot 1
GT3D-4 Timing Diagrams, continued
2 F
F2—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No.
peration
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
TTaT T’T T’’ T
3 A
A3—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No.
peration
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
T
TaTTTaTa T T’ T’’ T
3 B
B3—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No.
peration
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
Ta
TTa T T’ T’’
3 C
C3—
—
Time Remaining
Time Elapsed
Item
Power
Delayed
Indicator
Terminal No.
peration
2-10 (POWER)
8-11 8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
GT3D-4
9-11
(NC)
(NO)
2-6 (A)
5-7 (B) 3-6ON or L
2-7 (A)
6-7 (B) 3-7ON or L
2-5 (A) 3-5ON or L
Start
Reset
Gate
Input
TaTa TaT T’ T’’
Timers GT3D Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-31
G
Timers
One-Shot ON-Delay
One Shot 2
Signal ON/OFF-Delay 3
GT3D-4 Timing Diagrams, continued
3 D
D3—
—
Time Remaining
Time Elapsed
3 E
E3—
—
Time Remaining
Time Elapsed
3 F
F3—
—
Time Remaining
Time Elapsed
GT3D Series Timers
G-32 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Delayed DPDT
ON-Delay One-Shot 1
Cycle One-Shot
ON-Delay One-Shot 2
GT3D-8 Timing Diagrams
Note: T = Set time
Ta = Shorter than set time
Tb = Shorter than single-shot
output time
T = T’ + T”
T0 = Single-shot output time
(selected from
A, B, C, D, E or F)
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
(Contact Input) (Transistor Input)
1
Time Remaining
Time Elapsed
1
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
(NC)
(NO)
2-6ON or L
2-7ON or L
2-5ON or L
Start
Reset
Gate
Input
To
TTa T T’’ ToTb T’ T Tb
2
Time Remaining
Time Elapsed
2
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
(NC)
(NO)
2-6ON or L
2-7ON or L
2-5ON or L
Start
Reset
Gate
Input
To
TTo
TT’
Ta TbT T T’’
TTo Ta
ToTo
3
Time Remaining
Time Elapsed
3
Item
Power
Delayed
Indicator
Terminal No. Operation
2-10 (POWER)
8-11
9-11
UP
Contact
OUT
DOWN
Digital
Time
Display
1-4
1-3
Set Time
(NC)
(NO)
2-6ON or L
2-7ON or L
2-5ON or L
Start
Reset
Gate
Input
To
TTa TT Tb
Tb Ta T’ Tb
T’’
Timers GT3D Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-33
G
Timers
Step 1 Desired Mode/Selection Remarks
Select the desired
time display and
operation modes.
Time
Display
Mode
➀ Indicator Mode
Selector
Operation
Mode ➁ Operation
Mode Selector
1. Use the flat screwdriver to set the selectors.
Since selectors do not turn all the way around,
both clockwise and counterclockwise rotation
may be necessary.
2. The ➀ Indicator Mode Selector determines
whether the Digital Time Display shows the
time elapsed or time remaining. The ➁ Opera-
tion Mode Selector determines the desired
operation mode. Decide which display and
mode is desired, then use these two selec-
tors➀➁ to set the operation mode.
3. The ➁ Operation Mode Selector has two
blank modes which are not intended for use.
Always have this selector set to A, B, C, or D.
Time
elapsed ON-delay 1
A
Time
remaining
Time
elapsed Interval
B
Time
remaining
Time
elapsed Cycle 1
C
Time
remaining
Time
elapsed Cycle 3
D
Time
remaining
Step 2 Desired Operation Selection Remarks
Select a time range that
contains the desired
period of time.
Base Time Ranges
➂ Time Range
Selector 1. The ➂ Time Range Selector controls both
the decimal point indicator (9.99, 99.9, 999) and
the time increment indicators S (seconds), M
(minutes), and H (hours).
2. Chose which base time range contains the
targeted timer setting. Then use the ➂ Time
Range Selector to set the decimal point indica-
tor and time increment indicator to its corre-
sponding pair of settings.
3. Since these configurations offer a complete
range of settings from 0.01 seconds to 99.9
hours, the setting of 9.99 for minutes and the
9.99 and 999 settings for hours are not listed
and should not be used.
Decimal Point
Indicator
Time Increment
Indicator
0.01 seconds to 9.99 seconds 9.99
0.1 seconds to 99.9 seconds 99.9
1 second to 999 seconds 999
0.1 minutes to 99.9 minutes 99.9
1 minute to 999 minutes 999
0.1 hours to 99.9 hours 99.9
Step 3 Desired Operation Selection Remarks
Set the precise period of time desired by using the ➃ Time Setting Digital Switch.
Use the ➃ Time Setting Digital Switch to set
the desired period of time. It is important to
remember that the setting of the ➂ Time
Range Selector determines the units of time
measurement as well as the implied decimal
point location.
Instructions: Setting GT3D-2, GT3D-3 Timers
Timed OUT Indicator
Digital Time Display
(LCD backlit
with red LED)
➀ Indication Mode
Selector
11
➃ Time Setting
Digital Switch
➂ Time Range Selector
9.99S – 99.9H
➁ Operation Mode Selector
A, B, C, D
1
A
1
1
1
B
1
1
1
C
1
1
1
D
1
1
S
S
M
M
H
H
It is important to remember that the ➂ Time Range Selector not only selects the time range but also influences the interpreta-
tion of the Digital Time Display . Changing the ➂ Time Range Selector setting chang es the units of time measur ement (seconds,
minutes, hours) as well as the decimal point location.
GT3D Series Timers
G-34 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Step 1 Desired Mode/Selection Remarks
Select the desired
time display and
operation modes.
Time
Display
Mode
➀ Indicator
Mode
Selector
Operation
Mode ➁ Operation Mode
Selector
1. Use a flat screwdriver to set the selec-
tors. Since selectors do not turn all the
way around, both clockwise and counter-
clockwise rotation is necessary.
2. The ➀ Indicator Mode Selector deter-
mines whether the Digital Time Display
shows the time elapsed or time remaining.
The ➁ Operation Mode Selector deter-
mines the desired operation mode. Decide
which display and mode is desired; then
use these two selectors➀➁ to set the
operation mode.
3. When using the indicator mode setting
“1,” the ➁ Operation Mode Selector has
two blank modes which are not intended
for use. When using mode setting “1,”
always have the operation mode selector
set to A, B, C, or D.
Time
elapsed ON-delay 1
Interval 1
Cycle 1
D: Cycle 3
A
B
C
D
Time
remaining
Time
elapsed
ON-delay 2
Cycle 2
Signal ON/OFF-delay 2
Signal OFF-delay 1
Interval 2
One-shot cycle
A
B
C
D
E
F
Time
remaining
Time
elapsed
Signal ON/OFF-delay 2
Signal OFF-delay 2
One-shot 1
One-shot ON-delay
One-shot 2
Signal ON/OFF-delay 3
A
B
C
D
E
F
Time
remaining
Step 2 Desired Operation Selection Remarks
Select a time range that
contains the desired
period of time.
Base Time Ranges
➂ Time Range
Selector 1. The ➂ Time Range Selector controls
both the decimal point indicator (9.99, 99.9,
999) and the time increment indicator: S
(seconds), M (minutes), and H (hours).
2. Choose the base time range which con-
tains the targeted timer setting. Then use
the ➂ Time Range Selector to set the deci-
mal point indicator and time increment indi-
cator to its corresponding pair of settings.
3. Since these configurations offer a com-
plete range of settings from 0.01 seconds to
99.9 hours, the setting of 9.99 for minutes
and the 9.99 and 999 settings for hours are
not listed and should not be used.
Decimal Point
Indicator
Time Increment
Indicator
0.01 seconds to 9.99 seconds 9.99
0.1 seconds to 99.9 seconds 99.9
1 seconds to 999 seconds 999
0.1 minutes to 99.9 minutes 99.9
1 minute to 999 minutes 999
0.1 hours to 99.9 hours 99.9
Step 3 Desired Operation Selection Remarks
Select the desired period of time by using the ➃Time Setting Digital Switch.
Use the ➃ Time Setting Digital Switch to
set the desired period of time. It is impor-
tant to remember that the setting of the
➂ Time Range Selector determines the
units of time measurement as well as the
implied decimal point location.
Instructions: Setting GT3D-4 Timers
Timed OUT Indicator
Digital Time Display
(LCD backlit
with Red LED)
➃ Time Setting
Digital Switch
➂ Time Range Selector
9.99S – 99.9H
➁ Operation Mode Selector
A, B, C, D, E, F
➀ Operation Mode
Selector/Indication
Mode Selector
1
1
2
2
3
3
S
M
H
It is important to remember that the ➂ Time Range Selector not only selects the time range, but also influences the interpreta-
tion of the Digital Time Display . Changing the ➂ Time Range Selector setting chang es the units of time measur ement (seconds,
minutes, hours) as well as the implied decimal point location.
Timers GT3D Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-35
G
Timers
Step 1 Desired Mode of Operation Selection Remarks
Select the
time display
and
operation
modes.
Operation Mode Time Display Mode ➀ Indicator Mode Selector
1. Use a flat screwdriver to set the selectors.
Since selectors do not turn all the way around,
both clockwise and counterclockwise rotation
is necessary.
2. The GT3D-8 ➀ Indicator Mode Selector
selects both whether the Digital Time Display
displays the time elapsed or time remaining
and also the mode of operation. Decide which
display and mode is desired. Then use this
selector to set the operation mode.
ON-Delay One-Shot
Time elapsed
Time remaining
Cycle one-shot
Time elapsed
Time remaining
ON-delay one-shot 2
Time elapsed
Time remaining
Step 2 Desired Mode of Operation Selection Remarks
Select the
single shot
output time.
Desired Single-Shot Output Time ➁ Single-Shot Output Time Selector
On the GT3D-8 timers, the desired single-shot
output time can be selected from the A, B, C, D,
E, and F modes using the ➁ One-Shot Output
Time Selector.
0.1 seconds A
0.5 seconds B
1 second C
5 seconds D
10 seconds E
50 seconds F
Step 3 Desired Mode of Operation Selection Remarks
Select the
time range that
contains the
desired period
of time.
Base Time Ranges
➂ Time Range Selector 1. The ➂ Time Range Selector controls both
the decimal point indicator (9.99, 99.9, 999) and
the time increment indicator: S (seconds), M
(minutes), and H (hours).
2. Chose which base time range contains the
targeted timer setting. Then use the ➂ Time
Range Selector to set the decimal point indica-
tor and time increment indicator to its corre-
sponding pair of settings.
3. Since these configurations offer a complete
range of settings from 0.01s to 99.9 hours, the
setting of 9.99 for minutes and the 9.99 and 999
settings for hours are not listed and should not
be used.
Decimal Point
Indicator
Time Increment
Indicator
0.01 seconds to 9.99 seconds 9.99
0.1 seconds to 99.9 seconds 99.9
1 second to 999 seconds 999
0.1 minutes to 99.9 minutes 99.9
1 minute to 999 minutes 999
0.1 hours to 99.9 hours 99.9
Step 4 Desired Mode of Operation Selection Remarks
Select the desired period of time by using the ➃ Time Setting Digital Switch.
Use the ➃ Time Setting Digital Switch to set
the desired period of time. It is important to
remember that the setting of the ➂ Time
Range Selector selects the units of time
measurement as well as the implied decimal
point location.
Instructions: Setting GT3D-8 Timers
Timed OUT Indicator
Digital Time Display
(LCD backlit
with Red LED)
➀ Indication Mode
Selector
11
➃ Time Setting
Digital Switch
➂ Time Range Selector
9.99S – 99.9H
➁ Single-Shot Output Time Selector
A, B, C, D, E, F
1
1
2
2
3
3
S
M
H
It is important to remember that the ➂ Time Range Selector not only selects the time range, but also influences the interpreta-
tion of the Digital Time Display . Changing the ➂ Time Range Selector setting chang es the units of time measur ement (seconds,
minutes, hours) as well as the decimal point location.
GT3F Series Timers
G-36 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
GT3F Series — True OFF Delay Timers
Key features of the GT3F series include:
• Mountable in sockets or flush panel
• “True” power OFF-delay up to 10 minutes
• No external control switch necessary
•Available with reset inputs
UL, c-uL Listed
File No. E55996
GT3F-1 GT3F-2
Specifications
Operation True power OFF-delay
Time Range 0.05 seconds to 600 seconds
Rated Voltage 100 to 240V AC, 50/60Hz
24V AC/DC
Contact Rating 250V AC/30V DC, 5A
(resistive load)
250V AC/30V DC, 3A
(resistive load)
Contact Form SPDT DPDT
Minimum Power
Application Time 1 second
Voltage Tolerance AF20: 100 to 240V AC
AD24: 21.6 to 26.4VDC, 20.4 to 26.4VAC
Repeat Error ±0.2%, ±10 msec
Voltage Error ±0.2%, ±10 msec
Temperature Error ±0.2%, ±10 msec
Setting Error ±10% maximum
Insulation Resistance 100MΩ minimum
Dielectric Strength
Between power and output terminals:
2,000V AC, 1 minute (SPDT)
1,500V AC, 1 minute (DPDT)
Between contacts on different poles:
1,000V AC, 1 minute (DPDT)
Between contacts of the same pole:
750V AC, 1 minute
Power Consumption AF20: 3.7VA (200V AC, 60Hz)
AD24: 0.8W (DC), 1.2VA (AC)
Mechanical Life 20,000,000 operations minimum
Electrical Life 100,000 operations minimum
Vibration Resistance 100m/sec2 (approximate 10G)
Shock Resistance
Operating extremes:
100 m/sec2 (approximate 10G)
Damage limits: 500 m/sec2 (approximate 50G)
Operating Temperature –10 to +50°C
Storage Temperature –30 to +80°C
Operating Humidity 45 to 85% RH
Weight (approximate) 77g 79g
1.An inrush current flows during the minimum power application time. AF20: approximate 0.3A, AD24:
approximate 0.6A
2.GT3F does not read the preset time range shown on the knob after power is turned off . Note that minimizing
the preset time, by turning the knob to zero, does not shorten the delay time after power is removed.
GT3F Table of Contents
Specifications — G-36
Part Number List — G-37
Timing Diagrams/Schematics — G-37
Instructions: Setting Timer — G-39
Instructions: Wiring Inputs — G-40
GT3 Accessories — G-48
GT3 Instructions — G-50
GT3 Dimensions — G-52
Timing Diagrams Overview — G-4
Timers GT3F Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-37
G
Timers
Part Numbers: GT3F
Mode of Operation Rated Voltage Code Time
Range Output Contact Optional
Input
Complete Part Number
8-Pin 11-Pin
Power OFF-delay
AF20: 100 to 240VAC (50/60Hz)
AD24: 24V AC/DC
0.05
seconds
to
600
seconds
250V AC, 5A,
30V DC, 5A
(resistive load)
Delayed
SPDT Reset
GT3F-1AF20 GT3F-1EAF20
GT3F-1AD24 GT3F-1EAD24
250V AC, 3A,
30V DC, 3A
(resistive load)
Delayed
DPDT
None (8p)
Reset
(11p)
GT3F-2AF20 GT3F-2EAF20
GT3F-2AD24 GT3F-2EAD24
GT3F-1 (8-pin) GT3F-1E (11-pin)
Delayed SPDT Output, with Reset Input
Part Numbering List
1.Optional reset input resets the contact to the OFF state before time out.
Timing Diagrams/Schematics
GT3F-1 Timing Diagrams
1
2
6
5
7
8
4
3
POWER
(+)(-)
Reset
1
2
6
5
7
8
4
3
POWER
(+)(-)
Reset
(Contact Input) (Transistor Input)
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset
(Contact Input) (Transistor Input)
Item
Power
Reset
Delayed
Terminal No. Operation
2-7 (8p)
2-10 (11p)
(Power)
1-4 (8p)
6-7 (11p)
(ON or L)
5-8 (8p)
1-4 (11p)
(NC)
Set Time
In put
6-8 (8p)
POWER
Contact
1-3 (11p)
(NO)
Indicator
Tr TTa Ts T
T = Set Time
Ta = Shorter than Set Time
Ts = 1 Second
Tr = Minimum Power
Application Time
• GT3F-1: 1 Second
2. For time ranges, see page G-39.
3. For sockets and accessory part numbers, see page G-48.
4. When power is applied, the NO output contact closes. When power is removed, the timing period begins.
When time has elapsed, the NO contact opens.
5. For the timing diagram overview, see page G-4.
GT3F Series Timers
G-38 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
GT3F-2 (8-pin) GT3F-2E (11-pin)
Delayed DPDT Output
When power is applied, the NO contact closes. When power is removed, the timing period begins. When time has elapsed, the NO contact opens. Optional reset
input will return contacts to original state before time elapses.
GT3F-2 Timing Diagrams
1
2
6
7
8
3
POWER
(+)(-)
54
POWER
2
6
57
84
(+)(-)
10
11
1
Reset 9
POWER
2
6
57
84
3
(+)(-)
10
11
1
9
Reset
3
(Contact Input) (Transistor Input)
Item
Power
Reset
Delayed
Terminal No. Operation
2-10(Power)
6-7 (11p)(ON or L)
1-4
8-11
(NC)
Set Time
In put
1-3
POWER
Contact
9-11
(NO)
Indicator
Tr TTa Ts T
11-Pin Type
Item
Power
Delayed
Terminal No. Operation
2-7 (Power)
1-4
5-8
(NC)
Set Time
1-3
POWER
Contact
6-8
(NO)
Indicator
TrTT
8-Pin Type
T = Set Time
Tr = Minimum Power Application Time: 1 Second
T = Set Time
Ta = Shorter than Set Time
Ts = 1 Second
Tr = Minimum Power
Application Time:
1 Second
Timers GT3F Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-39
G
Timers
Steps Desired
Operation Selection Remarks
1. Select a time range that
contains the desired period
of time.
Base Time
Ranges ➀ Dial
Selector ➁ Time Range
Selector
Time range can be selected from 1S and 10S using a flat screwdriver and
five different dials of 0 to 1, 0 to 3, 0 to 6, 0 to 18, and 0 to 60 are displayed in
the six windows by turning the Dial Selector, allowing for selecting the
best suited scale. Note that the switch does not turn infinitely.
0.05s to 1s 0 to 1
1S0.05s to 3s 0 to 3
0.05s to 6s 0 to 6
0.1s to 10s 0 to 1
10S
0.3s to 30 0 to 3
0.6s to 60 0 to 6
1.8s to 180s 0 to 18
6s to 600s 0 to 60
2. The set time is selected by turning the ➂ Setting Knob.
Setting Examples:
1) When the Setting Knob ➂ is set at 2.5,
with Dial Selector ➀ 0 to 3 and
Time Range Selector ➁ 1S selected,
then the set time is 2.5 seconds.
2) When the Setting Knob ➂ is set at 5.0,
with Dial Selector ➀ 0 to 60 and
Time Range Selector ➁ 10S selected,
then the set time is 500 seconds.
Instructions: Setting GT3F Timers
POWER
Indicator
➂ Setting
Knob
➁ Time
Range
Selector
1S, 10S
➀ Dial Selector
0-1, 0-3, 0-6, 0-18, 0-60
GT3F Series Timers
G-40 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Inputs of GT3F
To avoid electric shock, do not touch the input signal terminal during power voltage application.
Never apply the input signals to two or more GT3F timers using the same contact or transistor.
In a transistor circuit for controlling input signals, with its primary and secondary power circuits
isolated, do not ground the secondary circuit.
On the GT3F timers, connect the input signals to terminal No.1 and 4 only on the 8-pin type; con-
nect the input signals to terminal No. 6 and 7 only on the 11-pin type. Never apply voltage to
other terminals; otherwise, the internal circuit may be damaged.
Input signal lines must be made as short as possible and installed away from power cables and
power lines. Use shielded wires or a separate conduit for input wiring.
The GT3F, consisting of a high-impedance circuit, may not be reset due to the influence of an
inductive voltage or residual voltage caused by a leakage current. If not reset, connect an RC filter
or bleeder resistor between power terminals so that the voltage between power terminals can be
reduced to less than 15% of the rated voltage.
Instructions: Wiring Inputs
~
Input
Terminal
}
2
2
10
10
Input
Terminal
}
Input Contact
or Transistor
GT3 Series
Timer
Power
Incorrect Correct
~
Input
Terminal
}
2
2
10
10
Input
Terminal
}
Power
~
Input
Terminal
}
GT3 Series
Timer
Power
Rectifier
Circuit
Circuit
Insulating Transformer
Timers GT3S Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-41
G
Timers
Star-Delta
Time Ranges:
Contact Ratings:
Operation
Mode Rated Input Voltage Time Range Output Contact Part No.
8-pin Type
Star-Delta AF20:
100 to 240V AC (50/60Hz)
Star: 0.05 to 100 sec
Star-Delta
switching time:
0.05 sec
0.1 sec
0.25 sec
0.5 sec
250V AC/30V DC, 5A
(resistive load)
Star: Delayed SPST-NO
Delta: Delayed SPST-NO GT3S-1AF20
Star: Delayed SPST-NO
Delta: Delayed SPST-NO
Instantaneous: SPST-NO
GT3S-2AF20
➀ Star Dial Selector ➁ Star-Delta Switching
Time Selector
Dial Time Range Time
0-5 0.05 sec - 5 sec 0.05 sec
0-10 0.1 sec - 10 sec 0.1 sec
0-50 0.5 sec - 50 sec 0.25 sec
0-100 1 sec - 100 sec 0.5 sec
Contact Ratings 250V AC/30V DC, 5A
(resistive load)
Life Mechanical 20,000,000 operations minimum
Electrical 100,000 operations minimum (rated load)
GT3S Table of Contents
Specifications — G-42
Operation Charts — G-43
GT3 Accessories — G-48
GT3 Instructions — G-50
GT3 Dimensions — G-52
Timing Diagrams Overview — G-4
GT3 (Star-Delta) Timers
Delta Output Indicator
➁ Star-Delta Switching
Time Selector
0.05 sec, 0.1 sec,
0.25 sec, 0.5 sec
Star Output Indicator
➀ Star Dial Selector
0-5, 0-10, 0-50, 0-100
Star Setting Knob
UL c-uL Listed
File No. E55996
GT3S Series Timers
G-42 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Operation System Solid state CMOS circuitry
Operation Type Star-delta
Time Range Star side: 0.05 to 100 sec
Star-delta switching time:
0.05, 0.1, 0.25, 0.5 sec
Rated Operational Voltage 100 to 240V AC (50/60Hz)
Operating Temperature -10 to +50˚C
Storage Temperature -30 to +80˚C
Operating Humidity 45 to 85% RH
Voltage Tolerance 85 to 264V AC
Repeat Error ±0.2%, ±10 msec
Voltage Error ±0.2%, ±10 msec
Temperature Error ±0.2%, ±10 msec
Setting Error ±10% maximum
Reset Time 500 msec maximum
Insulation Resistance 100MΩ minimum
Dielectric Strength Between power and output terminals: 2,000V AC, 1 minute
Between contacts of different poles: 2,000V AC, 1 minute
Between contacts of the same pole: 750V AC, 1 minute
Vibration Resistance 100 m/sec2 (Approx. 10G)
Shock Resistance Operating extremes: 100m/sec2 (Approx. 10G)
Damage limits: 500m/sec2 (Approx. 50G)
Power
Consumption
(Approx.)
Type
GT3S-1
3.0VA (100V AC, 60Hz),
10.4VA (200V AC, 60Hz)
Type
GT3S-2
4.0VA (100V AC, 60Hz),
12.0VA (200V AC, 60Hz)
General Specifications
Timers GT3S Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-43
G
Timers
4
3
2
6
7
18
5
POWER
POWER
4
3
2
6
7
18
5
5
4
3
2111
10
9
8
7
6
5
4
3
2111
10
9
8
7
6
POWER
POWER
Item Terminal No. Operation
Power 2-7 (8p)
2-10 (11p)
(POWER)
5-8 (8p)
1-3 (11p)
(NO)
6-8 (8p)
9-11 (11p)
(NO)
Star
Delta
Star
Delayed
Contact
Delta
Delayed
Contact
Indicator
Set T ime T1T2T3
The star delayed contact goes on when power is turned on and goes off after a set
time for the star contact (T1). The delta delayed contact goes on after star-delta
switching time (T2) and goes off when power is turned off.
T1 = Star ON time (Set Time), T2 = Star-delta switching time, T3 = Delta ON time
Item Terminal No. Operation
Power 2-7 (8p)
2-10 (11p)
(POWER)
5-8 (8p)
1-3 (11p)
(NO)
6-8 (8p)
9-11 (11p)
(NO)
Star
Delta
Star
Delayed
Contact
Delta
Delayed
Contact 1-3 (8p)
6-7 (11p)
(NO)
Instanta-
neous
Contact
Indicator
Set T ime T1T2T3
The star delayed contact goes on when power is turned on and goes off after a set
time for the star contact (T1). The delta delayed contact goes on after star-delta
switching time (T2) and goes off when power is turned off.
The intantaneous contact goes on when power is turned on and goes off when power
is turned off.
T1 = Star ON time (Set Time), T2 = Star-delta switching time, T3 = Delta ON time
Product
Series Operation Chart
Internal Connection &
Terminal Arrangement
GT3S-1
Star: Delayed
SPST-NO
Delta: Delayed
SPST-NO
GT3S-2
Star: Delayed
SPST-NO
Delta: Delayed
SPST-NO
Instantaneous
SPST-NO
(8-pin Type)
(11pin T ype)
(8-pin Type)
(11pin T ype)
5-8: Star contact
6-8: Delta contact
1-3: Star contact
9-11: Delta contact
5-8: Star contact
6-8: Delta contact
1-3: Star contact
9-11: Delta contact
6-7: Instantaneous contact
Operation Charts
GT3W Series Timers
G-44 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
c-uL Listed
UL Listed
File No.E55996
GT3W Series — Dual Time Range Timers
General Specifications
Operation System Solid state CMOS Circuit
Operation Type Multi-Mode
Time Range 1: 0.1sec to 6hours, 3: 0.1sec to 300hours
Pollution Degree 2 (IE60664-1)
Over voltage category III (IE60664-1)
Rated Operational
Voltage
AF20 100-240V AC(50/60Hz)
AD24 24V AC(50/60Hz)/24V DC
D12 12V DC
Voltage Tolerance
AF20 85-264V AC(50/60Hz)
AD24 20.4-26.4V AC(50/60Hz)/21.6-26.4V DC
D12 10.8-13.2V DC
Disengaging value of Input
Voltage Rated Voltage x10% minimum
Range of Ambient Operating
Temperature -10 to +50ºC (without freezing)
Range of Ambient Storage and
Transport Temperature -30 to +75ºC (without freezing)
Range of Relative Humidity 35 to 85%RH (without condensation)
Atmospheric Pressure 80kP a to 110kP a (Operating), 70kPa to 110kPa (Transport)
Reset Time 60msec maximum
Repeat Error ±0.2%, ±10msec*
Voltage Error ±0.2%, ±10msec*
Temperature Error ±0.6%, ±10msec*
Setting Error ±10% maximum
Insulation Resistance 100MΩ minimum (500V DC)
Dielectric Strength Between power and output terminals: 2000V AC, 1 minute
Between contacts of different poles: 2000V AC, 1 minute
Between contacts of the same pole:750V AC, 1 minute
Vibration Resistance 10 to 55Hz amplitude 0.75mm2 hours in each of 3 axes
Shock Resistance Operating extremes: 98m/sec2 (approx.10G)
Damage limits: 490m/sec2 (approx. 50G)
3 times in each of 3 axes
Degree of Protection IP40 (enclosure), IP20 (socket) (IEC60529)
Power
Consumption
(Approx.)
AF20 100V AC/60Hz 2.3VA
200V AC/60Hz 4.6VA
AD24 (AC/DC) 1.8VA/0.9W
Mounting Position Free
Dimensions 40Hx 36W x 70 mm
Weight (Approx.) 72g
Contact Ratings
Allowable Contact Power 960VA/120W
Allowable Voltage 250V AC/150V DC
Allowable Current 5A
Maximum permissible
operating frequency 1800 cycles per hour
Rated Load
1/8HP, 240V AC
3A, 240V AC (Resistive)
5A, 120V AC/30V DC
(Resistive)
Conditional Short Circuit Fuse 5A, 250V
Life Electrical 100,000 op. minimum
(Resistive)
Mechanical 20,000,000 op. minimum
** For the value of the error against a preset time, whichever the largest.
Key features of the GT3W series include:
• Sequential start, sequential interval, on-delay, recycler, and
interval ON timing functions
•2 time settings in one timer
•8 selectable operation modes on each model
• Mountable in sockets or flush panel
• Power and output status indicating LEDs
•Time ranges up to 300 hours
GT3W Table of Contents
Specifications — G-44
Part Number List — G-45
Timing Diagrams / Schematics — G-46
Instructions: Setting Timer — G-47
GT3 Accessories — G-48
GT3 Instructions — G-50
GT3 Dimensions — G-52
Timing Diagrams Overview — G-4
Timers GT3W Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-45
G
Timers
Part Numbers
Mode of
Operation Output Contact Time Range* Rated Voltage Pin Configuration New Part Numbers
A: Sequential Start
B: On-delay with
course & fine
C: Recycler &
instaneous
D: Recycler out-
puts (OFF Start)
E: Recycler outputs
(ON Start)
F: Interval ON
G: Interval ON
Delay
H: Sequential
Interval
3A, 240V AC
5A, 120V AC/30V DC
(Resistive Load)
Delayed
SPDT
+
Delayed
SPDT
1: 0.1sec - 6 hours
*(See Time Range
Settings for details.)
100 to 240V AC (50/60Hz)
8 pin GT3W-A11AF20N
11 pin GT3W-A11EAF20N
24V AC/DC
8 pin GT3W-A11AD24N
11 pin GT3W-A11EAD24N
12V DC
8 pin GT3W-A11D12N
11 pin GT3W-A11ED12N
3: 0.1sec - 300 hours
100 to 240V AC (50/60Hz)
8 pin
GT3W-A33AF20N
24V AC/DC GT3W-A33AD24N
Time Range Code: 1 Time Range Code: 3
Time Range
Selector Scale Time Range Time Range
Selector Scale Time Range
1S
0-1
0.1 sec - 1 sec 1S
0 - 3
0.1 sec - 3 sec
10S 0.3 sec - 10 sec 1M 3 sec - 3 min
10M 15 sec - 10 min 1H 3 min - 3 hours
1S
0 - 6
0.1 sec - 6 sec 1S
0 - 30
0.6 sec - 30 sec
10S 1 sec - 60 sec 1M 36 sec - 30 min
1M 6 sec - 6 min 1H 36min - 30 hours
10M 1 min - 60 min 10H 6 hours - 300 hours
1H 6 min - 6 hours
Part Number List
1. For schematics, see page G-46.
2. For socket and accessory part number information, see page G-48.
3. 8- and 11-pin models differ only in the number of pins (extra pins are not used).
4. For the timing diagram overview, see page G-4.
5. *For details on setting time ranges, see the instructions on page G-47.
Time Range Table
GT3W Series Timers
G-46 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Timing Diagrams/Schematics
1
2
6
5
7
8
4
3
POWER
(+)(-) 2
6
57
84
3
POWER
(+)(-)
9
10
11
1
8-Pin 11-Pin
T1 T2 T1 T2
T1 T2
T1 T2
T1 T2
T1 T2
A : Sequential StartB :
On-delay with course and fine
C :
Recycler and instaneous
D :
Recycler outputs (OFF Start)
E :
Recycler outputs (ON Start)
F : Interval ONG : Interval ON DelayH :
Sequential Interval
MODE MODE
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Delayed
Contact
Ry2
Operation
Indi-
cator
Terminal
No.
Item
Power
Delayed
Contact
Ry1
5-8(8p)
8-11(11p)
(NC)
6-8(8p)
9-11(11p)
(NO)
2-7(8p)
2-10(11p)
1-4(8p)
1-4(11p)
(NC)
OUT1
1-3(8p)
1-3(11p)
(NO)
OUT2
Set Time
Operation chart Operation chart
T1T2
T1 T2
T1T2
T1 T2
T1T2
Timers GT3W Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-47
G
Timers
Instructions: Setting GT3W Timer
T2 Setting Knob
T1 Time Range
Selector
Operation Mode
Selector
T2 Time Range
Selector
T1 Setting Knob
1. The switches should be securely turned
using a flat screwdriver 4mm wide (maxi-
mum). Note that incorrect setting may cause
malfunction. The switches, which do not turn
infinitely, should not be turned beyond their
limits.
2. Since changing the setting during timer oper-
ation my cause malfunction, turn power off
before changing.
Safety Precautions
Special expertise is required to use Electronic Timers.
• All Electronic Timer modules are manufactured under IDEC's rig-
orous quality control system, but users must add a backup or fail
safe provision to the control system when using the Electronic
Timer in applications where heavy damage or personal injury may
occur should the Electronic Timer fail.
• Install the Electronic Timer according to instructions described in
this catalog.
• Make sure that the operating conditions are as described in the
specifications. If you are uncertain about the specifications, contact
IDEC in advance.
• In these directions, safety precautions are categorized in order of
importance to Warning and Caution.
Warning
Warning notices are used to emphasize that improper operation may
cause sever personal injury or death.
• Turn power off to the Electronic timer before starting installation,
removal, Wiring, maintenance, and inspection on the Electronic
Timer.
• Failure to turn po wer off may cause electrical shocks or fire hazard.
• Emergency stop and interlocking circuits must be configured out-
side the Electronic timer. If such a circuit is configured inside the
Electronic Timer, failure of the Electronic timer may cause mal-
function of the control system, or an accident.
Caution
Caution notices are used where inattention might cause personal
injury or damage to equipment.
• The Electronic Timer is designed for installation in equipment. Do
not install the Electronic Timer outside equipment.
• Install the Electronic Timer in environments described in the speci-
fications. If the Electronic Timer is used in places where it will be
subjected to high-temperature, high-humidity, condensation, corro-
siv e gases, excessi ve vibrations, or excessi ve shocks, then electrical
shocks, fire hazard, or malfunction could result.
• Use an IEC60127-approved fuse and circuit breaker on the power
and output line outside the Electronic Timer.
• Do not disassemble, repair, or modify the Electronic Timer.
• When disposing of the Electronic Timer, do so as industrial waste.
GT3 Series Accessories Timers
G-48 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Part Numbers: DIN Rail/Surface Mount Sockets and Hold-Down Springs
Installation of Hold-Down Springs
DIN Rail Mount Socket Applicable Hold-Down Springs
Style Appearance Use with Timers Part No. Appearance Part No.
8-Pin Screw Terminal
(dual tier)
GT3A-1, 2, 3 (8-pin)
GT3D-1, 2, 3 (8-pin)
GT3F-1, 2 (8-pin)
GT3W (8-pin)
GT3S
SR2P-05
SFA-203
11-Pin Screw Terminal
(dual tier)
GT3A-1, 2, 3 (11-pin)
GT3A-4, 5, 6
GT3D-1, 2, 3 (11-pin)
GT3D-4, 8
GT3F-1, 2 (11-pin)
GT3W (11-pin)
SR3P-05
8-Pin Fingersafe Socket
GT3A-1, 2, 3 (8-pin)
GT3D-1, 2, 3 (8-pin)
GT3F-1, 2 (8-pin)
GT3W (8-pin)
GT3S
SR2P-05C
11-Pin Fingersafe Socket
GT3A-1, 2, 3 (11-pin)
GT3A-4, 5, 6
GT3D-1, 2, 3 (11-pin)
GT3D-4, 8
GT3F-1, 2 (11-pin)
GT3W (11-pin)
SR3P-05C
8-Pin Screw Terminal
GT3A-1, 2, 3 (8-pin)
GT3D-1, 2, 3 (8-pin)
GT3F-1, 2 (8-pin)
GT3W (8-pin)
GT3S
SR2P-06
SFA-202
11-Pin Screw Terminal
GT3A-1, 2, 3 (11-pin)
GT3A-4, 5, 6
GT3D-1, 2, 3 (11-pin)
GT3D-4, 8
GT3F-1, 2 (11-pin)
GT3W (11-pin)
SR3P-06
DIN Mounting Rail
Length 1000mm — BNDN1000
Accessories: GT3 Series
DIN Rail Mounting Accessories
DIN Rail Mount Socket Panel Mount Socket
Socket SR2P-06 Hold-down Spring (sold separately)
SFA-202 (use two springs)
Insert the springs into the outer
slots with the projections
facing inside.
Socket SR3P-05
Insert the springs
into the slots.
Hold-down Spring (sold separately)
SFA-203 (use two springs)
8-pin Socket
SR2P-511
Hold-down Spring
SFA-402
Insert
Timers GT3 Series Accessories
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-49
G
Timers
Part Numbers: Panel Mount Sockets and Hold-Down Springs
Part Numbers: Flush Panel Mount Adapter and Sockets that use an Adapter
Panel Mount Socket Applicable HD Springs
Style Appearance Use with Timers Part No. Appearance Part No.
8-Pin Solder Terminal
GT3A- (8-pin)
GT3D- (8-pin)
GT3W- (8-pin)
GT3F- (8-pin)
GT3S
SR2P-51
SFA-402
11-Pin Solder Terminal
GT3A- (11-pin)
GT3D- (11-pin)
GT3W- (11-pin)
GT3F- (11-pin)
SR3P-51
Accessory Description Appearance Use with Timers Part No.
Panel Mount
Adapter
Adaptor for flush panel mounting
GT3 timers All GT3 timers RTB-G01
Sockets for use
with Panel
Mount Adapter
8-pin screw terminal All 8-pin timers SR6P-M08G
11-pin screw terminal All 11-pin timers SR6P-M11G
8-pin solder terminal All 8-pin timers SR6P-S08
11-pin solder terminal All 11-pin timers SR6P-S11
1. For information on installing the hold-down springs, see page G-48.
Panel Mounting Accessories
(Shown: SR6P-M08G
for Wiring Socket
Adapter)
2. No hold down springs are available for flush panel mounting.
GT3 Series Instructions Timers
G-50 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Inputs
To avoid electric shock, do not touch the input signal terminal during power voltage applica-
tion.
When connecting the input signal terminals of two or more GT3A timers to the same contact or
transistor, the input terminals of the same number should be connected. (Connect Terminals
No.2 in common.)
In a transistor circuit for controlling input signals, with its primary and secondary power cir-
cuits isolated, do not ground the secondary circuit.
Connect the input signal terminals of the GT3A timers to Terminal No.2 only. Never apply volt-
age to other terminals; otherwise, the internal circuit may be damaged.
Input signal lines must be made as short as possible and installed away from power cables and
power lines. Use shielded wires or a separate conduit for input wiring.
Instructions: Wiring Inputs for GT3 Series
~
Input
Terminal
}
2
2
10
10
Input
Terminal
}
Input Contact
or Transistor
GT3 Series
Timer
Power
Incorrect Correct
~
Input
Terminal
}
2
2
10
10
Input
Terminal
}
Power
~
Input
Terminal
}
GT3 Series
Timer
Power
Rectifier
Circuit
Circuit
Insulating Transformer
~
210
Power
5, 6 and 7
Input
Terminals
Ry
Timers GT3 Series Instructions
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-51
G
Timers
For contact input, use highly reliable gold-plated contacts to make sure that the residual voltage is
less than 1V when the contacts are closed.
For transistor input, use transistors with the following specifications; VCE = 40V, VCES = 1V or less, IC
= 50 mA or more, and ICBO = 50µA or less. The resistance should be less than 1kΩ when the transis-
tor is on. When the output transistor switches on, a signal is input to the timer.
Inputs: GT3A-1, -2, -3
Transistor output equipment such as proximity switches and photoelectric switches can input signals
if they are voltage/current output type, with power voltage ranges from 18 to 30V and have1V. When
the signal voltage switches from H to L, a signal is input to the timer.
Inputs: GT3A-4, -5, -6
Start Input The start input initiates a time-delay
operation and controls output status. No-voltage contact inputs and
NPN open collector transistor
inputs are applicable.
24V DC, 1mA maximum
Input response time:
50msec maximum
Reset Input When the reset input is activated, the
time is reset, and contacts return to
original state.
Gate Input The time-delay operation is suspended
while the gate input is on (pause).
Inputs Instructions: continued
2
6
57
84
3
POWER
(+mm)(-)
9
10
11
1
ResetStartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
A Type B Type
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Reset StartGate
2
6
57
84
3
POWER
(+)(-)
9
10
11
1
Start Reset
A Type B Type
5, 6 and 7
Input
Terminals
}
2
Transistor
Transistor Output Circuit
GT3 Series Dimensions Timers
G-52 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Dimensions: GT3 Series
Unit: m
m
70.0
36.0
N4
0
.
0
5.6
NOTE: GT3W series are UL Listed when used in combination
with following IDEC's sockets:
GT3W-A11, A33: SR2P-06* pin type socket.
GT3W-A11E, A33: SR3P-05* pin type socket.
(*-May be followed by A,B,C or U)
The socket to be used with these timers are rated:
-Conductor Temperature Rating 60ºC min.
-Use 14AWG max.(2mm2max.) Copper conductors only
-Terminal Torque 1.0 to 1.3 N-m
Analog GT3 Timer, 8-Pin with SR2P-06 Analog GT3 Timer, 11-Pin with SR3P-06
Analog Setting Type (When using DIN Rail)
DIN Rail
Hold-
down
Spring
(SFA-202)
1.7
31.7
601
95 maximum
When using BAA/BAP: 99 maximum
40
36
18
22864.2 13
Analog Setting Type (When using DIN Rail)
DIN Rail
Hold-
down
spring
(SFA-202)
1.7
31.7
60
1
95 maximum
When using BAA/BAP: 99 maximum
40
36
18
22864.2 13
1.56"
(40mm)
1.404" 2.5"
0.039"
(1mm)
3.43" (88mm) Maximum
When Mounting on DIN Rail
BNDN: 3.59" (92mm) Maximum
0.507"
(13mm)
0.702"
(18mm)
0.858" (22mm)
DIN Rail
2.34"
(60mm)
0.039"
(1mm)
HD Spring
0.066"
(1.7mm)
SFA-202
Digital GT3 Timer, 8-Pin with SR2P-06
1.56"
(40mm)
1.404" 2.5"
0.039"
(1mm)
3.43" (88mm) Maximum
When Mounting on DIN Rail
BNDN: 3.59" (92mm) Maximum
0.507"
(13mm)
0.702"
(18mm)
0.858" (22mm)
DIN Rail
2.34" (60 mm)
0.039"
(1mm)
HD Spring
1.23"
(31.7mm)
SFA-202
Digital GT3 Timer, 11-Pin with SR3P-06
(64.2mm)
(36mm) (64.2mm)
(36mm)
0.066"
(1.7mm)
1.23"
(31.7mm)
Analog GT3 Timer, 11-Pin with SR3P-05
1.56"
(40mm)
1.404" 2.42"
0.039"
(1mm)
3.68" (94.5mm) Maximum
When Mounting on DIN Rail
BNDN: 3.84" (98.5mm) Maximum
0.507"
(13mm)
1.05"
(27mm)1.29" (33mm)
0.644"
(16.5mm)
0.78"
(20mm)
1.11" (28.5mm)
DIN Rail
BNDN
2.03"
(52mm)
0.117"
(3mm
)
HD Spring
SFA-203
Digital GT3 Timer, 11-Pin with SR3P-05
(64.2mm)
(36mm)
Analog Setting Type (When using DIN Rail)
DIN Rail
(BAA/BAP/BADA)
Hold-down
Spring (SFA-203)
101.5 maximum
BAA or BAP: 105.5 maximum
ø27
33
40
36 8 64.2 13
16.5
20
28.5
523
Timers GT3 Series Dimensions
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC G-53
G
Timers
Panel Mount Adapter
1.87"
(48mm)
1.87" (48mm)
Panel Mount
Adapter
2.39" (61.2mm)
0.12"
(3mm)
Panel Thickness:
0.03" to 0.2" (0.8 to 5mm)
0.066"
(1.7mm)
3.82" (98mm) Maximum
Wiring Socket Adapter
1.66"
(42.5m
m
Analog GT3 Timer, 8-Pin and 11-Pin with Digital GT3 Timer, 8-Pin and 11-Pin with
SR6P-S08 or SR6P-S11 SR6P-S08 or SR6P-S11
Back Wiring Socket
1.7
48
48
11 61.2
Panel Thickness 0.8 to 5mm
42.5
98 maximum
Mounting Hole Layout
Analog and Digital GT3 Timer, 8-Pin with SR6P-M08G
Analog and Digital GT3 Timer, 11-Pin with SR6P-M11G
ø3.6 min.
8-M3.5 Terminal Screw
2187
3456
6.9 max.
30.4
44.6
Panel Thickness 0.8 to 5mm
80.5
7
9.8 × 3
44.6
3.5 max. 5.6 min.
ø3.6 min.
11-M3.5 Teminal Screws
6.9 max.
92
4389
10
211
5176 3.5 max. 5.8 min.
30.5 7
8.5 × 4
16.7 45
34
45
Close Mounting
Single Mounting
45
45
45
48N--3
General Instructions Timers
G-68 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
G
Timers
Timing accuracies are calculated from the following formulas:
Repeat Error
Voltage Error
Tv: Average of measured values at voltage V
Tr: Average of measured values at the rated voltage
Temperature Error
Tt: Average of measured values at °C
T20: Average of measured values at 20°C
Setting Error
General Instructions for All Timer Series
L
oad Current
W
ith inductive, capacitive, and incandescent lamp loads, inrush current more
t
han 10 times the rated current may cause welded contacts and other undes-
i
red effects. The inrush current and steady-state current must be taken into
c
onsideration when specifying a timer.
C
ontact Protection
S
witching an inductive load generates a counter-electromotive force (back
E
MF) in the coil. The back EMF will cause arcing, which may shorten the con-
t
act life and cause imperfect contact. Application of a protection circuit is
r
ecommended to safeguard the contacts.
T
emperature and Humidity
U
se the timer within the operating temperature and operating humidity
r
anges and prevent freezing or condensation. After the timer has been stored
b
elow its operating temperature, leave the timer at room temperature for a
s
ufficient period of time to allow it to return to operating temperatures before
u
se.
E
nvironment
A
void contact between the timer and sulfurous or ammonia gases, organic
s
olvents (alcohol, benzine, thinner, etc.), strong alkaline substances, or strong
a
cids. Do not use the timer in an environment where such substances are
p
revalent. Do not allow water to run or splash on the timer.
V
ibration and Shock
E
xcessive vibration or shocks can cause the output contacts to bounce, the timer
s
hould be used only within the operating extremes for vibration and shock resis-
t
ance. In applications with significant vibration or shock, use of hold down
s
prings or clips is recommended to secure a timer to its socket.
Time Setting
The time range is calibrated at its maximum time scale; so it is desirable to
use the timer at a setting as close to its maximum time scale as possible. For
a more accurate time delay, adjust the control knob by measuring the operat-
ing time with a watch before application.
Input Contacts
Use mechanical contact switch or relay to supply power to the timer. When
driving the timer with a solid-state output device (such as a two-wire proxim-
ity switch, photoelectric switch, or solid-state relay), malfunction may be
caused by leakage current from the solid-state device. Since AC types com-
prise a capacitive load, the SSR dielectric strength should be two or more
times the power voltage when switching the timer power using an SSR.
Generally, it is desirable to use mechanical contacts whenever possible to
apply power to a timer or its signal inputs. When using solid state devices, be
cautious of inrushes and back-EMF that may exceed the ratings on such
devices. Some timers are specially designed so that signal inputs switch at a
lower voltage than is used to power the timer (models designated as “B"
type).
Timing Accuracy Formulas
= ± 1 x Maximum Measured Value – Minimum Measured Value x 100%
Maximum Scale Value2
= ± Tv - Tr x 100%
Tr
= ± Tt - T20 x 100%
T20
= ± Average of Measured Values - Set Value x 100%
Maximum Scale Value