GPS Active Antenna Module - Magnet Base
STANDARD SPECIFICATIONS:
TYPICAL APPLICATIONS:
FEATURES:
38.3 X 35 X 12mm
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
MSL level: Not Applicable
APAMP-125
Revised: 10.27.14
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
• High Reliability/Sensitivity
• Compact Size
• Easy to install (magnet base)
• ROHS Compliant
Antenna
Low Noise Amplifier (LNA)
ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS
• Automotive Navigation
• Automotive Monitoring
• Personal Tracking
Parameters
Min.
Typ.
Max.
Units
Note
Center Frequency
1574.40
1575.42
1576.44
MHz
DC Voltage
3.0
5.0
V
Gain
25
27
29
dB
(+25°C ± 10°C)
Output VSWR
2.0
Noise Figure
1.5
(+25°C ± 10°C)
DC current
13.5
15.5
mA
(At 5.0V)
Parameters
Min.
Typ.
Max.
Units
Note
Center Frequency 1574.40 1575.42 1576.44 MHz
Bandwidth
10.0 MHz
VSWR at Center Frequency 1.5:1
Polarization Model
RHCP
(Right Hand Circular Polarization)
Impedance
50
Ω
Gain
5
dBic
(Based on 70× 70mm ground plane)
Operating Temperature -40 +80 ˚C
Storage Temperature
-45 +85
˚C
Test condition: 25x25mm ground
S11: Input VSWR
38.3 X 35 X 12mm
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
APAMP-125
Revised: 10.27.14
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
LNA REFLECTION PROFILE
OUTLINE DRAWING:
Unit:mm
Test condition: DC 5.0V
S21: LNA Gain
GPS Active Antenna Module - Magnet Base
Bottom View
Side View
Top View
Parameters
Description
L (Cable Length)
300±10cm
Antenna
Dielectric Ceramic
RF Cable
RG174
PCB
FR4
RF Connector SMA-J3
Shielding
Tinplate
Thickness
13mm
Mounting Type
Magnet Base
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
PRODUCT IMAGE:
PACKAGING:
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
APAMP-125
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
38.3 X 35 X 12mm
Each 475 x 215 x 215 mm size carton includes 100 pieces of antenna.
Revised: 10.27.14
GPS Active Antenna Module - Magnet Base
