Interfaces, PCB Mounting Tracks panels. Order ready-made modules, or mount your own printed circuit boards into Altech mounting tracks. If your needs go beyond our comprehensive range of standard interface and electronic modules, Altech can custom design modules that meet even the most sophisticated requirements. Interfaces Ribbon Cable to Discrete Modules TS35x7.5 70mm (2.75 in.) TS32x15 75mm (2.95 in.) Provide a flexible, cost-effective transition between high-density connectors, and high-quality screw-cage clamp terminal blocks in communications, data processing, process control and other industrial applications. Equipped with component solder pads for easy insertion of circuit building components. DIN rail-mount, panel-mount available. TS35x7.5 TS32x15 70mm (2.75 in.) 75mm (2.95 in.) L Interface between multiwire flat cables with up to 64 conductors and discrete wires. No special tools are required. Supplied with short strain relief ejector latches (long latches available). Terminal blocks are individually marked to correspond to the numbers on the header pins. 250 VAC, 3 A; 22-12 AWG. Sub-D Modules Interface between high-density connectors with up to 50 poles and discrete wires. No special tools are required. Equipped with male or female connectors. All terminal blocks are individually marked to correspond to the numbers on the connector pins or sockets. 250 VAC, 4 A; 22-12 AWG. 87 mm (3.43 in.) 87 mm (3.43 in.) L Modules with Sub-D Female Connectors EACH Stock No. Mfr.'s Type Part No. Poles Length (L) mm (In.) 1-4 5-9 502-1109 502-1115 502-1126 502-1137 502-1150 SD-F9 SD-F15 SD-F25 SD-F37 SD-F50 5745.2 5746.2 5747.2 5748.2 5749.2 9 15 25 37 50 45 (1.770) 48 (1.890) 81 (3.190) 114 (4.490) 137 (5.390) 38.48 50.00 61.19 78.03 108.70 35.04 45.53 55.72 71.05 98.99 9 15 25 37 50 45 (1.770) 48 (1.890) 81 (3.190) 114 (4.490) 137 (5.390) 38.48 50.00 56.80 78.03 108.70 35.04 45.53 51.73 71.05 98.99 Modules with Sub-D Male Connectors 502-1209 502-1215 502-1225 502-1237 502-1250 502-1209 SD-M15 SD-M25 SD-M37 SD-M50 5740.2 5741.2 5742.2 5743.2 5744.2 DM 8-S Fig. A DM14 - A - S Fig. B 87 mm (3.43 in.) Mfr.'s Type DM4-S DM8-S DM12-S DM16-S DM20-S DM24-S EACH Part No. No. of Diodes Diode Length (L) mm (In.) 1-4 5-9 8971.2 5702.2 5703.2 8973.2 8974.2 8975.2 4 8 12 16 20 24 1N4007 1N4007 1N4007 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 90.0 (3.54) 110.0 (4.33) 130.0 (5.12) 23.47 46.50 56.17 76.21 147.50 116.79 21.38 42.34 51.15 69.40 126.96 106.35 DM6-A-S DM14-A-S DM22-A-S 8842.2 5704.2 5705.2 6 14 22 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 32.07 50.82 63.45 27.62 46.28 57.78 1-4 5-9 502-1010 502-1014 502-4202 502-4204 502-4206 502-4208 502-4210 502-4212 502-4214 502-4216 FBK10 FBK14 FBK16 FBK20 FBK26 FBK34 FBK40 FBK50 FBK60 FBK64 5720.2 5721.2 5722.2 5723.2 5724.2 5725.2 5726.2 5727.2 5728.2 5729.2 10 14 16 20 26 34 40 50 60 64 47 (1.850) 47 (1.850) 69 (2.720) 69 (2.720) 80 (3.150) 103 (4.060) 114 (4.490) 148 (5.830) 170 (6.680) 170 (6.680) 33.60 36.53 41.30 45.91 52.02 62.37 73.80 84.56 115.19 121.56 30.59 33.27 37.61 41.81 47.37 56.80 67.21 77.00 104.89 110.69 DM6-K-S DM14-K-S DM22-K-S 6 14 22 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 48.99 48.75 60.88 42.18 41.97 52.41 8850.2 5706.2 5707.2 L LED Indicator, Fuse Protection DIN Rail-Mount, PanelMount Available 87 mm (3.43 in.) Mfr.'s Type Description EACH 502-0032 8804-3 VRM24 166.25 *The output current specification must be derated depending on input voltage. Total power in the module should not exceed 5 Watts. www.alliedelec.com Part No. Position (Sockets) Length (L) mm (In.) 1-4 5-9 502-1361 502-1362 502-1366 502-4240 502-4242 502-4244 502-1370 502-1381 502-9991 502-4246 502-4248 502-4250 I/OI-1B* I/OI-2B* I/OI-4B* I/OI-1E I/OI-2E I/OI-4E I/OI-1G I/OI-2G I/OI-4G I/OB-4* I/OB-8* I/OB-16* 8954.0/B 8955.0/B 8956.0/B 8954.0/E 8955.0/E 8956.0/E 8954.0/G 8955.0/G 8956.0/G 8956.0 8959.0 8861.0 1 Isolated 2 Isolated 4 Isolated 1 Isolated 2 Isolated 4 Isolated 1 Isolated 2 Isolated 4 Isolated 4 Bussed 8 Bussed 16 Bussed 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 114.0 (4.490) 183.0 (7.200) 363.0 (14.30) 37.35 59.55 98.80 39.66 57.13 95.25 36.01 58.10 98.80 98.08 184.79 355.16 34.01 54.23 89.97 34.14 49.18 82.00 31.00 52.91 89.97 84.43 168.28 323.42 Printed Circuit Board Width High Guide (HG) 72.6 0.2 mm (2.86 0.008") Low Guide (LG) 68.5 0.5 mm (2.70 0.019") 85.7mm (3.38") Stock No. Mfr.'s Type For Mounting Printed Circuit Boards to DIN Rail or Panel Mount standard or custom printed circuit boards in Mounting Tracks which can be conveniently DIN Rail or Panel Mounted in your control panel or cabinet. They are easily assembled from standard components and snap onto 35 mm DIN Rail or can be Panel Mounted. Altech's voltage regulator modules provide a well-regulated output voltage from an unregulated source. Each module may be operated at an output voltage from 1.2 to 33 V. A 2 Amp fuse is included on the module. 86 dB Ripple Rejection @ 120 Hz (Typical) Easy Access to Voltage Adjustment Other Configurations Available 39.7 mm Upon Request (1.56 in.) EACH Stock No. PCB Mounting Tracks 63.5mm (2.5 in.) Voltage Regulators Output Voltage from 1.2 to 33 V 2 A Output Current* Line Regulation is .005% (Typical) 0.3% Load Regulation (Typical) TS35x7.5 37mm (1.46 in.) TS32x15 42mm (1.65 in.) Logic Voltage: *5 VDC; 15 VDC; 24 VDC; *5-24 VDC. Bussed Cathodes (Fig. C) 502-5340 502-5342 502-5344 Length (L) mm (In.) L Bussed Anodes (Fig. B) 502-5334 502-5336 502-5338 Poles Screw Cage Clamp Connector Integral Sockets, Retaining Nut Field Voltage Rating: 280 VAC/VDC Bussed Diodes (Fig. A) 502-5322 502-5324 502-5326 502-5328 502-5330 502-5332 Part No. Mount standard optocoupler input/output (I/O) modules in a high-density arrangement for logic output to field devices, or for input of field data to the controller. Altech I/O carriers can accept up to 16 industry standard 0.6" (15.24 mm) I/O modules in any combination -- input, output, AC or DC from most manufacturers. 1-, 2- and 4-isolated position versions with 5, 15 and 24 VDC logic; and 4-, 8- and 16-bussed (logic power) versions with 5 to 24 VDC. TS35x7.5 56mm (2.21 in.) TS32x15 61mm (2.40 in.) DM 14 - K - S Fig. C Wire individually labeled diodes into existing circuits for freewheeling, DC inductive kick suppression (commutating), reverse DC polarity protection, etc. Used bussed diodes for distribution of logic VCC or ground, or gather and decouple electrical signals for lamp testing, or collective fault messages. Use as commutating diodes across inductive loads such as DC relays, solenoid valves, actuator magnets, etc. to suppress voltage surges. Standard modules include series connection diode circuits in 1 A versions, and diode gates with bussed anodes or cathodes. DIN rail-mount, panel-mount and three A diodes available. Can be ordered as component carriers without diodes. Rated Current: 1 A. Stock No. Mfr.'s Type I/O Opto Carriers Diode Modules EACH Stock No. | Stock No. Mfr.'s Type Description EACH 500-0027 500-0028 500-0024 500-0023 500-0025 MTGTK/1M MTGTK/2M EPDR EPDP MTGF 1 Meter Track (Cut to length as needed) 2 Meter Track (Cut to length as needed) Rail End Section (Plain end cap) Panel End Section (End cap with panel mounting "ears") Foot Section (Mounts tracks to DIN rails) 13.64 25.57 .57 .52 .74 1.800.433.5700 313 3 Terminal Blocks & Strips * Altech Corp. Link incompatible systems, or expand the capabilities of your logic system with Altech interface and electronic modules and carriers. These DIN rail- or panel-mounted printed circuit board modules and carriers give design flexibility, simplify panel layouts and reduce maintenance and downtime. Modules are supplied completely assembled, with ready to wire screw-cage clamp terminal blocks in an extruded track, and can be mounted on 35 or 32 mm DIN rail, or directly to