Memory Module Specification BY KINGSTON KVR100X64C3/128 100MHz SDRAM 168-Pin PC100 DIMM Memory Module DESCRIPTION: This document describes ValueRAM's 16M x 64-bit (128MB), CAS Latency 3 (CL3) SDRAM (Synchronous DRAM) 100MHz memory module. The components on this module include sixteen 8M x 8-bit (2M x &-bitx 4 Bank / PC100 components) SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires 3.3V. The electrical and mechanical specifications are as follows: FEATURES: #| CLE Cycle Time (tCC) min. = 10ns (CAS Latency = 3) / max. = 1000ns #) Row Cycle Time (tC) 7Ons | CLE to Output (tSAC) max. = 6ns (CAS Latency = 3) #| Single Power Supply of +3.3V (=/- 3V) #| Power 3.372 W (operating) #| UL Rating o4V-0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM comibination and/or the module height may vary from what is described here. However, in ne configuration will the module height exceed 1.375" (94.2minn). Uris = inches tnillirmaters} B20 Hes 80) noes He oe Bow ae) (3.000) 27-280) | O78 \ eee aureus ae) (es = b= Oue7 2 0.004. _ L | (00D 2 0.400} F al pp Ba el | LT ee 7 it jaar 1 cL | n - = A I~ e c c 418m 4.008 7 2 nee, 2 100] = =a : 1450 2180 Eas ABO (eaeso ei] Peasy ABO Pisar) G50 Maw {m4 (31 Mad t * M id = il 2/5 ) c ae %, J i T Cuomo cuca + tam 2c4o} Figure 1: RV RIO0X64C3/128 166-Pin SDRAM Module Document No. VALUERAMOO?0-001.600 O22 FZ