A13
3.96mm Pitch Card Edge Connector
CR6 Series
■Product Specifications
Rating Current rating: 5A
Voltage rating:
600V AC
Operating Temperature Range: -30 to +85ç (Note 1)
Operating Humidity Range: 40 to 80%
Storage Temperature Range: -10 to +60ç (Note 2)
Storage Humidity Range
: 40 to 70
(Note 2)
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
500V DC
1800V AC/1 minute.
1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Manual soldering: 300ç for 3 seconds
5000M ohms min.
No flashover or insulation breakdown.
6m ohms max.
No electrical discontinuity of 10µs or more
Insulation resistance: 1000M ohms min.
Contact resistance: 6m ohms max.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
(-65ç: 30 minutes→15 to 35ç: 5 minutes max.→
125ç: 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.
Vibration
5.
Humidity(Steady state)
6.Temperature Cycle
7.
Durability (Mating/un-mating)
8.
Resistance to Soldering heat
Connection Method
Eyelet Open End Through hole
■Features
1. Contact Type
Uses the tuning fork contact,
where the contact pitch
is 3.96mm.
2. Variation in number of contacts
6, 10, 12, 15, 18, 22, 28, 36 contacts are
available
.
3. Connection Type
Eyelet, open end and through hole types are
available
.
4. Prevents mis-insertion in the board
Using the polarizing key prevents mis-insertion in the printed
board.
Item Specification Condition
A14
■Material
Insulator
Contact Dieallylphtalate
Copper alloy Blue
Gold plated UL94V-0
________
Parts Material Finish Remarks
■Ordering Information
CR6 – 22S – 3.96 E
qewr
rContact type E : Eyelet type
OE : Open end type
DS : Through hole type
qSeries Name : CR6
w
Number of contacts
: 6, 10, 12, 15, 18, 22, 28, 36
eContact pitch : 3.96mm
BContact Type
(1) Eyelet (2) Open End (3) Through hole
A15
BPCB Cutouts BContact No. Alignment List
NOTE 1 : To utilize alphabetic symbols, following 8
alphabetic characters are not used.
G. I, O, Q, g, i, o, q
NOTE 2 : The above pattern is viewed from the contact
(connection) side.
Unit: mm
Number of Contacts
610 12 15 18 22 28 36
A 38.9 54.8 62.7 74.6 86.5 102.4 126.1 158
NOTE : 11.1mm for 28, 36 contacts
C
Part Number CL No. B D EA
Number of Contacts
6
10
12
15
18
45
93
38.9
86.5
31.47
79
28
75.5
19.8
61 54.8 47.3 43.8 35.64
68.8 62.7 55.27 51.7 43.56
81 74.6 67.2 63.6 55.44
67.32
22 109 102.4 95 91.3 83.16
28 133.7 126.1 118.2 115.1 106.98
36 166 158 150 146.8 138.66
CR6-06S-3.96E
CR6-06S-3.96DS
CR6-10S-3.96E
CR6-10S-3.96DS
CR6-12S-3.96E
CR6-12S-3.96DS
CR6-15S-3.96E
CR6-15S-3.96DS
CR6-18S-3.96E
CR6-18S-3.96OE
CR6-18S-3.96DS
CR6-22S-3.96E
CR6-22S-3.96OE
CR6-22S-3.96DS
CR6-28S-3.96E
CR6-28S-3.96OE
CR6-28S-3.96DS
CR6-36S-3.96E
CR6-36S-3.96DS
506-0019-8
506-0022-2
506-0001-2
506-0013-1
506-0023-5
506-0026-3
506-0002-5
506-0014-4
506-0003-8
506-0007-9
506-0015-7
506-0004-0
506-0008-1
506-0016-0
506-0031-3
506-0032-6
506-0034-1
506-0027-6
506-0030-0
Unit: mm
orNOTE
A16
BPCB Dimensions
Unit: mm
NOTE : Using the polarizing key prevents mis-insertion in the printed board.
To use the polarizing key, insert the polarizing key so as to hit the mold bottom.
Part Number CL No. Material Color
CR6-GPIN (A) 506-0018-5 ABS Gray
■Polarizing Key
6
A
B
19.8
27.8
Number of Contacts
10
35.64
43.60
12
43.56
51.50
15
55.44
63.40
18
67.32
75.30
22
83.16
91.10
28
106.98
114.90
36
138.68
146.60
