T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD INDICATOR Part Number: L-7113BR-6.35/ID High Efficiency Red Features Description z LED firmly held by spacer-no additional fixturing or glueing The High Efficiency Red source color devices are made with necessary. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Suitable for back panel illumination,circuit board indicator, Light Emitting Diode. LED indicator. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE7405 REV NO: V.8A DATE: APR/17/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001487 Selection Guide Part No. Dice L-7113BR-6.35/ID Iv (mcd) [2] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Min. Typ. 25 50 *18 *40 Red Diffused 21/2 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 617 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE7405 REV NO: V.8A DATE: APR/17/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001487 High Efficiency Red L-7113BR-6.35/ID SPEC NO: DSAE7405 REV NO: V.8A DATE: APR/17/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001487 PACKING & LABEL SPECIFICATIONS L-7113BR-6.35/ID SPEC NO: DSAE7405 REV NO: V.8A DATE: APR/17/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001487 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAE7405 REV NO: V.8A DATE: APR/17/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001487