P578.D (04/17)
1pulseelectronics.com
THT Current Sense
Transformers & Inductors
VDE Approved
Designed for switching power supply applications
Transformer meets IEC950 insulation requirements
Frequency range from 20kHz to 200kHz
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part Number
Transformer
with 2-1 T
Primaries
Schem.
Figure
Part Number
Transformer
with 1T
Primary
Schem.
Figure
Part Number
Inductor
without
Primary
Schem.
Figure
Turns
Ns
Secondary
Inductance
MH
(MIN)
Secondary
Inductance
Test Voltage
(15.75 KHz)
RS
(Ω MAX)
RT
(Ω MAX)
Primary
Unipolar
Amp µ Sec.
Rating (MAX)
Primary
Bipolar
Amp µ Sec.
Rating (MAX)
1C PE-63586NL 1A PE-51686NL 2A 50 5.0 0.5 0.7 50 150 300
PE-64487NL 1C PE-63587NL 1A PE-51687NL 2A 100 20.0 1.0 1.40 100 300 600
PE-64488NL 1C PE-63588NL 1A PE-51688NL 2A 200 80.0 2.0 4.50 200 600 1200
PE-64517NL 1D PE-51717NL 2B 50CT 5.0 0.5 0.7 50 150 300
PE-64518NL 1D PE-63618NL 1B PE-51718NL 2B 100CT 20.0 1.0 1.40 100 300 600
PE-64519NL 1D PE-63619NL 1B PE-51719NL 2B 200CT 80.0 2.0 4.50 200 600 1200
PE-63691NL 1B 300CT 180.0 3.0 11.0 300 900 1800
Notes:
1. Maximum ratings specified with rated secondary terminating resistance and 1
turn primary.
2. Amp-microsend (AµSec.) rating of primary equalts volt microsend (VµSec.)
rating of secondary when secondary is terminated in rated resistance. (Amp -
microsends is equal to the product of a square pulse of current in amps, times
the current pulse width in microseconds.
3. Maximum operating temperature 105°C (ambient plus rise).
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
4. When terminated with rated terminating resistance, the inductor scale factor
is Vout = 1 volt per amp. for center tapped units terminating resistance for
each half of winding is listed value divided by two.
5. 1 turn primary peak sense current is 20 amps for all parts listed above.
V
DE
2
pulseelectronics.com
THT Current Sense
Transformers & Inductors
P578.D(04/17)
For More Information
Pulse Worldwide
Headquarters
15255 Innovation Dr. Ste. 100
San Diego, CA 92128 U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 78060
Fax: 49 7032 7806 135
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823 (Pulse)
Fax: 886 3 4356820 (FRE)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2015. Pulse Electronics, Inc. All rights reserved.
PE-XXXXX
Mechanicals
Schematic
163
275
4
PE-XXXXX
DATE CODE
0.900
22,86 MAX
0.700
17,78 MAX
0.700
17,78 MAX
0.700
17,78
.200
5,08
.010
0,25 MIN
.500
12,70 MIN
.500
12,70
.250
6,35
.030 ±.002
0,76 ,051
2X
.051 ±.003
1,30 ,076
4X
V
DE
1441
(Leads: 1,2,6,7) (Leads: 3,5)
3
1
25
3
1
2
6
75
1
3
1A 1C
2A 2B
1D
1B
3
1
25
4
3
1
24
6
75
1
3
2