SIMATIC Sensors RFID-Systeme SIMATIC RF642A Betriebsanleitung Beschreibung SIMATIC RF642A Merkmale Einsatzbereich Die SIMATIC RF642A ist eine universelle UHF-Antenne mit mittlerer Reichweite in industrietauglicher, kompakter Bauform. Frequenzbereich 865 ... 928 MHz Polarisation Linear polarisiert Geeignet fur RF600-Transponder, die einheitlich ausgerichtet an der Antenne vorbeigefuhrt werden. Schreib-/Leseabstand max. 5,0 m 1) Befestigung 4 x M4 (VESA 100-Befestigungssystem) Anschluss 30 cm Anschlusskabel (fest mit der Antenne verbunden) und RTNCKupplung Zum Anschluss an den Reader wird noch ein Antennenkabel benotigt, z. B. 6GT2815-0BH30) 1) anschliebare Reader Alle RF600-Reader mit externen Antennenanschlussen Mae in mm 185 x 185 x 45 Schutzart IP65 siehe RF600 Systemhandbuch Frequenzbereiche Die Antenne ist breitbandig verfugbar. Sie kann daher fur zwei verschieden Frequenzbereiche eingesetzt werden, die jeweils fur die Regionen Europa und China, USA bestimmt sind. Die Antenne arbeitet fur Europa (EU, EFTA-Lander) im Frequenzbereich von 865 bis 868 MHz. Die Antenne fur China, USA und Kanada arbeitet im Frequenzbereich von 902 bis 928 MHz. Funktion Die SIMATIC RF642A dient zum Senden und Empfangen der RFID-Signale im UHF-Bereich. Die Antennen werden uber Antennenleitungen, die in verschiedenen Langen lieferbar sind, an die SIMATIC RF600-Lesegerate angeschlossen. (c) Siemens 2010 J31069-D0226-U001-A2-0018, 12/2010 1 Bestelldaten Tabelle 1 Bestelldaten RF642A Produkt Bestell-Nr. SIMATIC RF642A 6GT2812-1GA08 Zubehor Tabelle 2 Bestelldaten Zubehor Produkt Steckleitung zwischen Reader und Antenne Antenna Mounting Kit Bestell-Nr. 3 m (Kabeldampfung 1,0 dB) 6GT2815-0BH30 10 m (Kabeldampfung 2,0 dB) 6GT2815-1BN10 10 m (Kabeldampfung 4,0 dB) 6GT2815-0BN10 20 m (Kabeldampfung 4,0 dB) 6GT2815-0BN20 siehe "RF600 Systemhandbuch", Kapitel "Antennen" > "Befestigungsarten" 6GT2890-0AA00 Einbau und Montage RF642A Befestigungsarten VESA 100-Befestigungssystem Zur Befestigung der Antenne ist ein genormtes VESA 100-Befestigungssystem vorgesehen. Das Befestigungssystem besteht aus vier Befestigungsbohrungen fur M4-Schrauben im Abstand von 100 mm. Damit ist die Montage geeignet fur: Montage auf metallischen und nicht metallischen Untergrunden Hinweis Fur optimale Wellenausbreitung sollte die Antenne nicht von leitenden Objekten umgeben sein. Der Bereich zwischen Antenne und Transponder sollte ebenso eine ungestorte Wellenausbreitung ermoglichen. Antenna Mounting Kit Das Antenna Mounting Kit ermoglicht die Feinjustierung des Antennenfeldes uber die Einstellung der Raumwinkel (siehe "RF600 Systemhandbuch", Kapitel "Antennen" > "Befestigungsarten"). 2 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Antenne am Reader anschlieen Die Antenne SIMATIC RF642A muss uber ein Antennenkabel am Reader angeschlossen werden. Fur den Anschluss stehen fertig konfektionierte Standardkabel (Seite 2) in den Langen 3 m, 10 m und 20 m zur Verfugung. Die Reichweite der Antenne wird die Leitungsdampfung begrenzt. Die maximale Reichweite kann mit dem Kabel 6GT28150BH30 (Lange 3 m) erzielt werden, da dieses Kabel die geringste Dampfung aufweist. Voraussetzung Hinweis Verwendung von Siemens Antennenkabel Um eine optimale Funktion der Antenne zu gewahrleisten, wird die Verwendung eines Siemens Antennenkabels gema Zubehorliste empfohlen. Zugentlastung Fur das Antennenkabel ist eine Zugentlastung vorzusehen, wie in folgender Grafik gezeigt: Bild 1 RF642A-Antennenanschluss (30 cm Anschlusskabel) RF600-Antennenkabel Zugentlastung (sollte an dieser Stelle erfolgen) Zugentlastung Biegeradien der Kabel Bezeichnung des Kabels Bestell-Nr. Lange [m] Kabeldampfung [dB] Biegeradius [mm] RF642AAntennenanschluss Fest mit Antenne verbunden 0,3 - - Antennenkabel 6GT2815-0BH30 3 1 51 Antennenkabel 6GT2815-1BN10 10 2 77 Antennenkabel 6GT2815-0BN10 10 4 51 Antennenkabel 6GT2815-0BN20 20 4 77 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 3 Ausrichtung der Transponder zur Antenne Polarisationsachse Da die Antenne RF642A linear polarisiert ist, muss die Ausrichtung der verwendeten Transponder in Bezug auf die Antenne beachtet werden. Grundsatzlich mussen die Polarisationsachsen von Antenne und Transponder parallel zueinander verlaufen. Das Symbol auf der Antenne stellt den Verlauf der Polarisationsachse grafisch dar. 3RODULVDWLRQVDFKVH Bild 2 4 Polarisationsachse SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Ausrichtung Die folgende Grafik zeigt die optimale Ausrichtung der RF600-Transponder zur Antenne RF642A. 6,0$7,&5)$ 5)7 5)7 Bild 3 5)7 5)7 5)7*HQ 5)/ 5)/ )57 Antennen-/Transponderausrichtung SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 5 Winkeldiagramm Ausrichtung Das folgende Diagramm zeigt die Abhangigkeit folgender Faktoren: Ausrichtungswinkels des Transponders zur Antenne Maximale Reichweite der Antenne 6,0$7,&5)$ PD[5HLFKZHLWH>@ r r r r r r r r r r r r r r r r r r :LQNHODEZHLFKXQJGHU3RODULVDWLRQVDFKHQYRQ$QWHQQHXQG7DJ>*UDG@ Bild 4 6 Winkeldiagramm Ausrichtung SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 RF642A fur RF630R parametrieren Betrieb innerhalb der EU, EFTA oder Turkei ACHTUNG Beschrankung der Strahlungsleistung nach EN 302 208 V1.2.1 RF600-Systeme die innerhalb der EU, EFTA oder Turkei (ETSI) in Betrieb genommen werden, durfen mit einer RF642A Antenne bis zu einer maximalen Strahlungsleistung von <500 mW ERP (bzw. 27 dBm ERP, 800 mW EIRP, 29,15 dBm EIRP) betrieben werden. Damit die Strahlungsleistung fur den Betrieb innerhalb der EU, EFTA oder Turkei nicht 500 mW ERP (bzw. 27 dBm ERP, 800 mW EIRP, 29,15 dBm EIRP) erreichen kann, durfen fur das jeweilige Kabel mit charakteristischer Kabeldampfung nur maximale Sendeleistungseinstellungen am Reader vorgenommen werden. Siehe auch hierzu im Parametrierhandbuch RF620R/RF630R den Parameter "distance_limiting" fur die Sendeleistungeinstellung des RESET-Befehls. ACHTUNG Strahlungsleistungserhohung um 3 dB beim Schreiben auf Transponder Werden vom Reader RF630R Daten auf Transponder geschrieben, dann erhoht der Reader selbstandig die Sendeleistung um bis zu 3 dB. Damit die maximale Strahlungsleistung <500 mW ERP (bzw. 27 dBm ERP, 800 mW EIRP, 29,15 dBm EIRP) nicht uberschritten wird, muss die einzustellende Sendeleistung ggf. um 3 dB reduziert werden. Im Folgenden finden Sie die Leistungseinstellungen uber den Parameter "distance_limiting" fur ausschlielich lesende Datenzugriffe (es darf kein WRITE-/INIT-Befehl uber die SIMATIC an einen Transponder erfolgen) und den Fall, dass schreibende oder lesende Datenzugriffe (es gibt mindestens einen WRITE-/INIT-Befehl uber die SIMATIC an einen Transponder) innerhalb einer Sequenz erfolgen sollen: Bezeichnung des Kabels Bestell-Nr. Antennenkabel 6GT2815-0BH30 3 Antennenkabel 6GT2815-1BN10 10 Antennenkabel 6GT2815-0BN10 Antennenkabel 6GT2815-0BN20 1) Lange [m] Kabeldampfung [dB] ANT1 / ANT2 [hex] Lesen Lesen oder Schreiben 1) 1 0..6 0..3 2 0..7 0..4 10 4 0..F 0..F 20 4 0..F 0..F Unter einem schreibenden Zugriff versteht man z. B. das Schreiben der EPC ID, des USER-Memorys, Absetzen eines LOCK-Befehls, Absetzen eines KILL-Befehls sowie das Schreiben von Passwortern auf Transponder. Betrieb innerhalb Chinas Die Landerzulassung von RF600-Systemen in China fordert eine Beschrankung auf 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP). Die mogliche Kombination von Antennengewinn, Kabelverlust und max. 500 mW Sendeleistung der RF630R Reader ermoglicht keine Uberschreitung von 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP). SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 7 Betrieb innerhalb der USA, Kanada ACHTUNG Beschrankung der Sendeleistung auf 4000 mW EIRP (36 dBm EIRP) bei einem Antennengewinn von 7 dBi Die Antenne muss von qualifiziertem Personal in Betrieb genommen werden. Antennen mit einem Antennengewinn >6 dBi durfen in Betrieb genommen werden, solange die Strahlungsleistung von 4000 mW EIRP (36 dBm EIRP) nicht uberschritten wird. Damit Anforderungen nach FCC und IC-FCB eingehalten werden, muss das System der folgenden Relation genugen: Kabelgebundene Leistung P dBm des RF600-Readers (<30 dBm) Antennengewinn Gi dBi im FCC-Frequenzband (7 dBi) Kabeldampfung ak dB (1 dB) P(dBm) 30 dBm - (Gi - 6 dBi) + ak RF642A fur RF660R parametrieren Bei der Parametrierung der SIMATIC RF642A Antenne fur den Reader RF660R handelt es sich um einen Sonderfall. Die Parametrierung ist aufgrund der fehlenden FCC- und IC-FCB-Zulassung fur den Betrieb in USA und Kanada nicht gestattet. Betrieb innerhalb der EU, EFTA oder Turkei ACHTUNG Beschrankung der Strahlungsleistung nach EN 302 208 V1.2.1 RF600-Systeme, die innerhalb der EU, EFTA oder Turkei (ETSI) in Betrieb genommen werden, durfen mit einer RF642A Antenne bis zu einer maximalen Strahlungsleistung von <500 mW ERP (bzw. 27 dBm ERP, 800 mW EIRP, 29,15 dBm EIRP) betrieben werden. Durch Einstellung der Strahlungsleistung von <500 mW ERP (bzw. 27 dBm ERP, 800 mW EIRP, 29,15 dBm EIRP), des RF642A Antennengewinns von 6 dBi sowie der zum Antennenkabel gehorigen Kabeldampfung (siehe Tabelle (Seite 3)), wird die Sendeleistung vom Reader korrekt konfiguriert und damit die Strahlungsleistung an der Antenne nicht uberschritten. Betrieb innerhalb Chinas Durch Einstellung einer max. Strahlungsleistung von 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), des RF642A Antennengewinns von 7 dBi sowie der zum Antennenkabel gehorigen Kabeldampfung (siehe Tabelle (Seite 3)), wird die entsprechende Sendeleistung vom Reader korrekt konfiguriert Betrieb innerhalb der USA, Kanada ACHTUNG Keine FCC- bzw. IC-FCB-Zulassung der RF660R-Reader in Kombination mit RF642A Weil fur die RF660R-Reader keine FCC- und IC-FCB-Zulassung in Kombination mit RF642A besteht, durfen die Antennen mit RF660R weder in den USA noch Kanada in Betrieb genommen werden! 8 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 RF642A fur RF670R parametrieren Betrieb innerhalb der EU, EFTA oder Turkei ACHTUNG Beschrankung der Strahlungsleistung nach EN 302 208 V1.3.1 RF600-Systeme die innerhalb der EU, EFTA oder Turkei (ETSI) in Betrieb genommen werden, durfen mit einer RF642A Antenne bis zu einer maximalen Strahlungsleistung von 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP) betrieben werden. Durch Einstellung der Strahlungsleistung von bis zu 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), des RF642A Antennengewinns von 6 dBi sowie der zum Antennenkabel gehorigen Kabeldampfung (siehe Tabelle (Seite 3)) wird die Sendeleistung vom Reader korrekt konfiguriert und damit die Strahlungsleistung an der Antenne nicht uberschritten. Betrieb innerhalb Chinas Durch Einstellung einer max. Strahlungsleistung von 2000 mW ERP (bzw. 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), des RF642A Antennengewinns von 7 dBi sowie der zum Antennenkabel gehorigen Kabeldampfung (siehe Tabelle (Seite 3)) wird die entsprechende Sendeleistung vom Reader korrekt konfiguriert. Betrieb innerhalb der USA, Kanada ACHTUNG Beschrankung der Sendeleistung auf 4000 mW EIRP (36 dBm EIRP) bei einem Antennengewinn von 7 dBi Die Antenne muss von qualifiziertem Personal in Betrieb genommen werden. Antennen mit einem Antennengewinn >6 dBi durfen in Betrieb genommen werden, solange die Strahlungsleistung von 4000 mW EIRP (36 dBm EIRP) nicht uberschritten wird. Damit Anforderungen nach FCC und IC-FCB eingehalten werden, muss das System der folgenden Relation genugen: Kabelgebundene Leistung P dBm des RF600-Readers (<30 dBm) Antennengewinn Gi dBi im FCC-Frequenzband (7 dBi) Kabeldampfung ak dB (1 dB) P(dBm) 30 dBm - (Gi - 6 dBi) + ak SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 9 Antennendiagramme Antennendiagramme im ETSI-Frequenzband Richtdiagramm Europa (ETSI) Das Richtdiagramm ist fur nominale Ausrichtung und eine Mittenfrequenz von 866,3 MHz abgebildet. Nominale Antennenausrichtung ist dann gegeben, wenn die Antenne wie in der nachstehenden Abbildung betrachtet wird. < r < r r ; ; r r = = r Bild 5 Bezugssystem Der Abstrahl-/Empfangswinkel der Antenne ist durch den Winkel zwischen den zwei -3 dB-Punkten definiert. Welcher Reichweite (in %) die dB-Werte der Diagramme entsprechen, konnen Sie dieser Tabelle entnehmen. Beachten Sie, dass die im Folgenden grafisch dargestellten Messungen, in einer reflexionsarmen Umgebung durchgefuhrt wurden. In normal reflektierender Umgebung kann es deshalb zu Abweichungen kommen. 10 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Richtcharakteristik im ETSI-Frequenzband *HZLQQG%L :LQNHO*UDG Charakteristik der vertikalen Raumebene der Antenne Charakteristik der horizontalen Raumebene der Antenne Bild 6 Richtcharakteristik RF642A im ETSI-Fequenzband SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 11 Antennendiagramme im FCC-Frequenzband Richtdiagramm USA (FCC) Das Richtdiagramm ist fur nominale Ausrichtung und eine Mittenfrequenz von 915 MHz abgebildet. < r < r r ; ; r r = = r Bild 7 Bezugssystem Der Abstrahl-/Empfangswinkel der Antenne ist durch den Winkel zwischen den zwei -3 dB-Punkten (entspricht der halben Leistung bezogen, auf Maximalleistung) definiert. Welcher Reichweite (in %) die dB-Werte der Diagramme entsprechen, konnen Sie dieser Tabelle entnehmen. Beachten Sie, dass die im Folgenden grafisch dargestellten Messungen, in einer reflexionsarmen Umgebung durchgefuhrt wurden. In normal reflektierender Umgebung kann es deshalb zu Abweichungen kommen. 12 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Richtcharakteristik der RF642A im FCC-Frequenzband *HZLQQG%L :LQNHO*UDG Charakteristik der vertikalen Raumebene der Antenne Charakteristik der horizontalen Raumebene der Antenne Bild 8 Richtcharakteristik der RF642A im FCC-Frequenzband SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 13 Interpretation von Richtdiagrammen Die folgende Ubersichtstabelle soll Ihnen bei der Interpretation von Richtdiagrammen helfen. Sie konnen der Tabelle entnehmen, welchen dBi-Werten welche Reichweiten der Antenne (in %) entsprechen: Sie konnen aus den Richtdiagrammen die abgestrahlte Leistung in Abhangigkeit des Raumwinkels ablesen und bekommen damit Aufschluss uber Reichweite der Antenne in diesem Raumwinkel in Bezug auf einen Transponder. Die dBr-Werte entsprechen der Differenz zwischen maximalem dBi-Wert und einem zweiten dBi-Wert. Abweichung vom maximalen Antennengewinn [dBr] Reichweite der Antenne [%] 0 100 -3 70 -6 50 -9 35 -12 25 -15 18 -18 13 Beispiel Wie man der Richtcharakteristik im ETSI-Frequenzband (Seite 11) entnehmen kann, ist der maximale Antennengewinn in der horizontale Raumebene 6 dBi. In dieser Raumebene und mit paralleler Polarisationsachse ist bei +70 bzw. 300 der Antennengewinn auf ca. 0 dBi abgefallen. Damit ist der dBr-Wert 6. Die Reichweite der Antenne betragt bei + 70 bzw. +300 von der Z-Achse innerhalb der horizontalen Raumebene nur noch 50 % gegenuber der maximalen Reichweite (siehe rot gefarbte Werte in der Richtcharakteristik: Charakteristik der vertikalen Raumebene der Antenne sowie die dazugehorige Darstellung des Bezugssystems ). 14 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Technische Daten Tabelle 3 Allgemeine Technische Daten RF642A Merkmal SIMATIC RF642A Mae in mm (L x B x H) 185 x 185 x 45 Farbe pastellturkis Material PA 12 (Polyamid 12) silikonfrei Frequenzbereich 865 ... 928 MHz Steckeranschluss 30 cm Koaxialkabel mit RTNC-Kupplung Zum Anschluss an den Reader wird noch ein Antennenkabel benotigt, z. B.: 6GT2815-0BH30 Max. Strahlungsleistung nach ETSI Max. Strahlungsleistung Fur China RF630R, RF660R: < 500 mW ERP RF670R: 2000 mW ERP RF630R: < 1200 mW ERP RF660R, RF670R: 2000 mW ERP nach FCC RF630R: 2000 mW EIRP RF670R: 4000 mW EIRP Max. Leistung 2000 mW Impedanz 50 Ohm Antennengewinn ETSI-Frequenzband: 6 dBi Max. Strahlungsleistung FCC-Frequenzband: 7 dBi VSWR (Stehwellenverhaltnis) max: 1,4 Polarisation linear polarisiert Offnungswinkel fur Senden/Empfangen ETSI-Frequenzband: Horizontale Ebene: 75 Vertikale Ebene: 70 Siehe Antennediagramm ETSI (Seite 11) FCCequenzband: Horizontale Ebene: 80 Vertikale Ebene: 70 Siehe Antennediagramm FCC (Seite 13) Vor-/Ruckverhaltnis ETSI-Frequenzband: 10 dB FCC-Frequenzband: 9,8 dB 2,2 dB Schock nach EN 60068-2-27 30 g Vibration nach EN 60068-2-6 10 g Befestigung der Antenne 4 Schrauben M4 (VESA 100-Befestigunssystem) Anziehdrehmoment 2 Nm (bei Raumtemperatur) Umgebungstemperatur im Betrieb bei Transport und Lagerung -25 C bis +75 C -40 C bis +85 C Schutzart nach EN 60529 IP65 Gewicht, ca. 600 g 1) Bei anderen Abmessungen/Materialien des Montageuntergrunds ergeben sich abweichende Werte. SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 15 Mabild Bild 9 s s Mabild RF642A Alle Maangaben in mm 16 SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 Zertifikate & Zulassungen Tabelle 4 6GT2812-1GA08 Zertifikat Beschreibung Konformitat nach R&TTE-Richtlinie in Zusammenhang mit den verwendeten Readern und Zubehor Tabelle 5 6GT2812-1GA08 Norm FCC CFR 47, Part 15 sections 15.247 Federal Communications Commission Industry Canada Radio Standards Specifications Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Die FCC-Zulassung wird in Zusammenhang mit der FCC-Zulassung der folgenden RF600-Readern erteilt: FCC ID: NXW-RF630R FCC ID: NXW-RF670 RSS-210 Issue 7, June 2007, Sections 2.2, A8 Die Zulassung fur Industry Canada wird in Zusammenhang mit der Zulassung Industry Canada der folgenden RF600-Readern erteilt: IC: 267X-RF630 IC: 267X-RF670 Dieses Produkt ist nach UL fur USA und Canada zertifiziert. Es erfullt folgende Standard(s) for Safety: UL 60950-1 - Information Technology Equipment Safety - Part 1: General Requirements CSA C22.2 No. 60950 -1 - Safety of Information Technology Equipment UL Report E 205089 Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG SIMATIC RF642A J31069-D0226-U001-A2-0018, 12/2010 J31069-D0226-U001-A2221-0018, 11/2010 17 SIMATIC Sensors RFID systems SIMATIC RF642A Operating Instructions Description SIMATIC RF642A Features Field of application The SIMATIC RF642A is a universal UHF antenna of compact, industrystandard design with medium range. Frequency band 865 to 928 MHz Polarization Linear polarization Suitable for RF600 transponders that are uniformly aligned while directed past the antenna. Writing/reading range Max. 5.0 m 1) Mounting 4 x M4 (VESA 100 fixing system) Connection 30 cm connecting cable (connected permanently to the antenna) and RTNC coupling An antenna cable is required for connection to the reader, e.g. 6GT2815-0BH30) Readers that can be connected 1) All RF600 readers with external antenna connections Dimensions in mm 185 x 185 x 45 Degree of protection IP65 See RF600 system manual Frequency bands The antenna is available for broadband. It can therefore be used for two different frequency bands that have been specified for the regions of Europe and China/USA respectively. The antenna for Europe (EU, EFTA countries) operates in the frequency band of 865 to 868 MHz. The antenna for China, the USA, and Canada operates in the frequency band of 902 to 928 MHz. Function The SIMATIC RF642A is used for transmitting and receiving RFID signals in the UHF frequency band. The antennas are connected to the SIMATIC RF600 readers via antenna cables that are available in different lengths. (c) Siemens 2010 J31069-D0226-U001-A2-7618, 12/2010 1 Ordering data Table 1 Ordering data RF642A Product Order No. SIMATIC RF642A 6GT2812-1GA08 Accessories Table 2 Ordering data (accessories) Product Connecting cable between reader and antenna Antenna Mounting Kit Order No. 3 m (cable loss 1.0 dB) 6GT2815-0BH30 10 m (cable loss 2.0 dB) 6GT2815-1BN10 10 m (cable loss 4.0 dB) 6GT2815-0BN10 20 m (cable loss 4.0 dB) 6GT2815-0BN20 See "RF600 System Manual", Chapter "Antennas" > "Mounting types" 6GT2890-0AA00 Installation and assembly RF642A mounting types VESA 100 mounting system A standardized VESA 100 mounting system is provided to mount the antenna. The mounting system consists of four fixing holes for M4 screws at intervals of 100 mm. This is therefore suitable for: Mounting on metallic and non-metallic backgrounds Note To achieve optimum wave propagation, the antenna should not be surrounded by conducting objects. The area between antenna and transponder should also allow wave propagation without interference. Antenna Mounting Kit The Antenna Mounting Kit allows the fine adjustment of the antenna field by setting the solid angle (see "RF600 System Manual", chapter "Antennas" > "Mounting types"). 2 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Connecting an antenna to the reader The SIMATIC RF642A antenna must be connected to the reader using an antenna cable. Preassembled standard cables (Page 2) in lengths of 3 m, 10 m, and 20 m are available for the connection. The range of the antenna is limited by the cable loss. The maximum range can be achieved with the cable 6GT2815-0BH30 (length 3 m), since this has the lowest cable loss. Requirement Note Use of Siemens antenna cable To ensure optimum functioning of the antenna, it is recommended that a Siemens antenna cable be used in accordance with the list of accessories. Strain relief The antenna cable is provided with strain relief as shown in the following diagram: Figure 1 RF642A antenna connection (30 cm connecting cable) RF600 antenna cable Strain relief (should take place at this position) Strain relief Bending radii of the cables Cable designation Order No. Length [m] Cable loss [dB] Bending radius [mm] RF642A antenna connection Fixed connection to antenna 0,3 - - Antenna cable 6GT2815-0BH30 3 1 51 Antenna cable 6GT2815-1BN10 10 2 77 Antenna cable 6GT2815-0BN10 10 4 51 Antenna cable 6GT2815-0BN20 20 4 77 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 3 Alignment of transponders to the antenna Polarization axis Since the RF642A antenna has linear polarization, it is necessary to consider the alignment of the transponders with regard to the polarization axis of the antenna. The polarization axes of antenna and transponder must always be parallel. The symbol on the antenna indicates the polarization axis. 3RODUL]DWLRQD[LV Figure 2 4 Polarization axis SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Alignment The following diagram shows the optimum alignment of the RF600 transponders to the RF642A antenna. 6,0$7,&5)$ 5)7 5)7 Figure 3 5)7 5)7 5)7*HQ 5)/ 5)/ )57 Antenna/transponder alignment SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 5 Angle deviation diagram for alignment The following diagram shows the dependence of the following factors. Alignment angle of transponder to antenna Maximum range of antenna 6,0$7,&5)$ 0D[UDQJH>@ r r r r r r r r r r r r r r r r r r $QJOHGHYLDWLRQRIWKHSRODUL]DWLRQD[HVRIDQWHQQDDQGWDJ>GHJUHHV@ Figure 4 6 Angle deviation diagram for alignment SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Parameterization of RF642A for RF630R Operation within the EU, EFTA, or Turkey NOTICE Limitation of the radiated power according to EN 302 208 V1.2.1 RF600 systems that are put into operation within the EU, EFTA or Turkey (ETSI) can be operated with an RF642A antenna with a maximum radiated power of <500 mW ERP (or 27 dBm ERP, 800 mW EIRP, 29.15 dBm EIRP). To ensure the radiated power does not reach 500 mW ERP for operation within the EU, EFTA, and Turkey (or 27 dBm ERP, 800 mW EIRP, 29.15 dBm EIRP), only the maximum radiated power may be set at the reader for each cable with characteristic cable loss. See also the "distance_limiting" parameter in the RF620R/RF630R parameterization manual for the radiated power setting of the RESET command. NOTICE Radiated power increase by 3 dB when writing data to transponders If data are written from the RF630R reader to a transponder the reader autonomously increases the radiated power by up to 3 dB. To ensure that the maximum radiated power <500 mW ERP (or 27 dBm ERP, 800 mW EIRP, 29.15 dBm EIRP) is not exceeded, the radiated power to be set must by reduced by 3 dB if necessary. The following contains the power settings made via parameter "distance_limiting" for read-only data access (no WRITE/INIT command may be issued to a transponder via the SIMATIC) and for the case that write or read data accesses should take place within one sequence (at least one WRITE/INIT command is issued to a transponder via the SIMATIC): Cable designation Order No. Length [m] Cable loss [dB] ANT1 / ANT2 [hex] Read Read or write 1) Antenna cable 6GT2815-0BH30 3 1 0..6 0..3 Antenna cable 6GT2815-1BN10 10 2 0..7 0..4 Antenna cable 6GT2815-0BN10 10 4 0..F 0..F Antenna cable 6GT2815-0BN20 20 4 0..F 0..F 1) A write access is, for example, writing the EPC ID, writing the USER memory, issuing a LOCK command, issuing a KILL command or writing passwords to transponders. Operation in China The national approval for RF600 systems in China requires a cap of 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP). The possible combination of antenna gain, cable loss, and max. 500 mW radiated power of the RF630R reader means it is not possible to exceed 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP). Operation in the USA, Canada NOTICE Limitation of the radiated power to 4000 mW EIRP (36 dBm EIRP) with an antenna gain of 7 dBi The antenna must be commissioned by qualified personnel. Antennas with a gain >6 dBi may be commissioned, as long as the effective radiated power of 4000 mW EIRP (36 dBm EIRP) is not exceeded. To comply with FCC and IC-FCB requirements, the system must satisfy the following relation: Conducted power P dBm of the RF600 reader (<30 dBm) Antenna gain Gi dBi in the FCC frequency band ( 7 dBi) Cable loss ak dB ( 1 dB) P(dBm) 30 dBm - (Gi - 6 dBi) + ak SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 7 Parameterization of RF642A for RF660R The parameterization of the SIMATIC RF642A antenna for the RF660R reader is a special case. The parameterization is not permitted due to the missing FCC and IC-FCB approval for operation in the USA and Canada. Operation within the EU, EFTA, or Turkey NOTICE Limitation of the radiated power according to EN 302 208 V1.2.1 RF600 systems that are put into operation within the EU, EFTA or Turkey (ETSI) can be operated with an RF642A antenna with a maximum radiated power of <500 mW ERP (or 27 dBm ERP, 800 mW EIRP, 29.15 dBm EIRP). By adjusting the radiated power of <500 mW ERP (or 27 dBm ERP, 800 mW EIRP, 29.15 dBm EIRP), the RF642A antenna gain of 6 dBi and the cable loss associated with the antenna cable (see table (Page 3)), the radiated power of the reader is correctly configured and the radiated power at the antenna is thus not exceeded. Operation in China By setting a max. radiated power of 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), the RF642A antenna gain of 7 dBi and the cable loss associated with the antenna cable (see table (Page 3)), the radiated power is correctly configured in the reader. Operation in the USA, Canada NOTICE No FCC or IC-FCB approval for the RF660R readers in combination with RF642A Because there is no FCC or IC-FCB approval for the RF660R reader in combination with RF642A, the antennas with RF660R may not be operated in either the USA or Canada! 8 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Parameterization of RF642A for RF670R Operation within the EU, EFTA, or Turkey NOTICE Limitation of the radiated power according to EN 302 208 V1.3.1 RF600 systems that are put into operation within the EU, EFTA, or Turkey (ETSI) can be operated with an RF642A antenna with a maximum radiated power of 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP). By adjusting the radiated power of up to 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), the RF642A antenna gain of 6 dBi and the cable loss associated with the antenna cable (see table (Page 3)), the radiated power of the reader is correctly configured and the radiated power at the antenna is thus not exceeded. Operation in China By setting a max. radiated power of 2000 mW ERP (or 33 dBm ERP, 3250 mW EIRP, 35 dBm EIRP), the RF642A antenna gain of 7 dBi and the cable loss associated with the antenna cable (see table (Page 3)), the radiated power is correctly configured in the reader. Operation in the USA, Canada NOTICE Limitation of the radiated power to 4000 mW EIRP (36 dBm EIRP) with an antenna gain of 7 dBi The antenna must be commissioned by qualified personnel. Antennas with a gain >6 dBi may be commissioned, as long as the effective radiated power of 4000 mW EIRP (36 dBm EIRP) is not exceeded. To comply with FCC and IC-FCB requirements, the system must satisfy the following relation: Conducted power P dBm of the RF600 reader (<30 dBm) Antenna gain Gi dBi in the FCC frequency band ( 7 dBi) Cable loss ak dB ( 1 dB) P(dBm) 30 dBm - (Gi - 6 dBi) + ak SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 9 Antenna patterns Antenna radiation patterns in the ETSI frequency band Directional radiation pattern Europe (ETSI) The directional radiation pattern is shown for nominal alignment and a center frequency of 866.3 MHz. The nominal antenna alignment is given when the antenna elevation is provided as shown in the following figure. < r < r r ; ; r r = = r Figure 5 Reference system The half-power beam width of the antenna is defined by the angle between the two -3 dB points. Which range (in %) corresponds to the dB values in the patterns can be obtained from this table . Note that the measurements presented graphically below were carried out in a low-reflection environment. Deviations can therefore occur in a normally reflecting environment. 10 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Directional radiation pattern in the ETSI frequency band $PSOLILFDWLRQG%L $QJOHGHJUHHV Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 6 Directional radiation pattern of RF642A in the ETSI frequency band SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 11 Antenna radiation patterns in the FCC frequency band Directional radiation pattern USA (FCC) The directional radiation pattern is shown for nominal alignment and a center frequency of 915 MHz. < r < r r ; ; r r = = r Figure 7 Reference system The half-power beam width of the antenna is defined by the angle between the two -3 dB points (corresponding to half the power referred to the maximum power). Which range (in %) corresponds to the dB values in the patterns can be obtained from this table . Note that the measurements presented graphically below were carried out in a low-reflection environment. Deviations can therefore occur in a normally reflecting environment. 12 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Directional radiation pattern of the RF642A in the FCC frequency band $PSOLILFDWLRQG%L $QJOHGHJUHHV Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 8 Directional radiation pattern of the RF642A in the FCC frequency band SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 13 Interpretation of directional radiation patterns The following overview table will help you with the interpretation of directional radiation patterns. The table shows which dBi values correspond to which read/write ranges (in %): You can read the radiated power depending on the reference angle from the directional radiation patterns, and thus obtain information on the read/write range with this reference angle with regard to a transponder. The dBr values correspond to the difference between the maximum dBi value and a second dBi value. Deviation from maximum antenna gain [dBr] Read/write range [%] 0 100 -3 70 -6 50 -9 35 -12 25 -15 18 -18 13 Example As can be seen in Directional radiation pattern in the ETSI frequency band (Page 11), the maximum antenna gain in the horizontal plane is 6 dBi. In this plane and with the parallel polarization axis at +70 or 300, the antenna gain dropped to about 0 dBi. Therefore the dBr value is 6. The antenna range is only 70 of the maximum range at + 50 or +300 from the Z axis within the horizontal plane (see values shown in red in the directional radiation pattern: Characteristic of the vertical plane of the antenna and the associated representation of the reference system). 14 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Technical data Table 3 General technical data RF642A Feature SIMATIC RF642A Dimensions in mm (L x W x H) 185 x 185 x 45 Color Pastel turquoise Material PA 12 (polyamide 12) Silicone-free Frequency band Plug connection 865 to 928 MHz 30 cm coaxial cable with RTNC coupling An antenna cable is required for connection to the reader, e.g.: 6GT2815-0BH30 Max. radiated power according to ETSI Max. radiated power For China Max. radiated power according to FCC RF630R, RF660R: < 500 mW ERP RF670R: 2000 mW ERP RF630R: < 1200 mW ERP RF660R, RF670R: 2000 mW ERP RF630R: 2000 mW EIRP RF670R: 4000 mW EIRP Max. power 2000 mW Impedance 50 Ohm Antenna gain ETSI frequency band: 6 dBi FCC frequency band: 7 dBi VSWR (standing wave ratio) max.: 1,4 Polarization Linear polarization Half power beam width for transmission ETSI frequency band: and reception Horizontal plane: 75 Vertical plane: 70 See ETSI antenna pattern (Page 11) FCC frequency band: Horizontal plane: 80 Vertical plane: 70 See FCC antenna pattern (Page 13) Front-to-back ratio ETSI frequency band: 10 dB FCC frequency band: 9.8 dB 2.2 dB Shock resistant to EN 60068-2-27 30 g Vibration resistant to EN 60068-2-6 10 g Attachment of the antenna 4 screws M4 (VESA 100 fastening system) Tightening torque 2 Nm (at room temperature) Ambient temperature Operation Transport and storage -25 C to +75 C -40 C to +85 C Degree of protection according to EN 60529 IP65 Weight, approx. 600 g 1) The values differ for different dimensions/materials of the mounting surface. SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 15 Dimension drawing Figure 9 s s Dimensional drawing of RF642A All dimensions in mm 16 SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 Approvals & certificates Table 4 6GT2812-1GA08 Certificate Description Conformity in accordance with R&TTE directive in association with the readers and accessories used Table 5 6GT2812-1GA08 Standard FCC CFR 47, Part 15 sections 15.247 Federal Communications Commission Industry Canada Radio Standards Specifications Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The FCC approval is granted in association with the FCC approval of the following RF600 readers: FCC ID: NXW-RF630R FCC ID: NXW-RF670 RSS-210 Issue 7, June 2007, Sections 2.2, A8 The approval for Industry Canada is granted in association with the Industry Canada approval of the following RF600 readers: IC: 267X-RF630 IC: 267X-RF670 This product is UL-certified for the USA and Canada. It meets the following safety standard(s): UL 60950-1 - Information Technology Equipment Safety - Part 1: General Requirements CSA C22.2 No. 60950 -1 - Safety of Information Technology Equipment UL Report E 205089 Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG SIMATIC RF642A J31069-D0226-U001-A2-7618, 12/2010 J31069-D0226-U001-A2221-7618, 11/2010 17