MIL-C-26482 Series 1 Type Connectors with PCB contacts PT02 box mounting receptacle L S 4 HOLES .120 .005 DIA. (.147 .005 DIA. SIZE 24) R (TP) R (TP) S .030 .001 DIA. FOR SIZE 16 & 20 CONTACTS M A N K Z PCB TAIL STICKOUT HOW TO ORDER * Order by applicable 71 part number in table below. 71 prefix designates olive drab cadmium plated connector shell. (For availability of other finishes consult Amphenol, Sidney, NY) * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 26 for alternate rotation letter to use. Example part number: 71-570121-98P designates shell size 8 with a 8-98 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. (MMC) located within .0025 of (TP) Z +.040 -.050 Part Number A +.001 -.005 K +.021 -.010 L Max. M +.010 -.000 N Dia. Max. R (TP) S +.011 -.010 Size 16 & 20 Contacts 6 71-570120-XXX .348 .493 .825 .431 .323 .469 .688 .380 Shell Size 8 71-570121-XXX .473 .493 .825 .431 .449 .594 .812 .380 10 71-570122-XXX .590 .493 .825 .431 .573 .719 .938 .380 12 71-570123-XXX .750 .493 .825 .431 .699 .812 1.031 .380 14 71-570124-XXX .875 .493 .825 .431 .823 .906 1.125 .380 16 71-570125-XXX 1.000 .493 .825 .431 .949 .969 1.219 .380 18 71-570126-XXX 1.125 .493 .825 .431 1.073 1.062 1.312 .380 20 71-570127-XXX 1.250 .650 1.076 .556 1.199 1.156 1.438 .286 22 71-570128-XXX 1.375 .650 1.076 .556 1.323 1.250 1.562 .286 24 71-570129-XXX 1.500 .683 1.109 .589 1.449 1.375 1.688 .253 All dimensions for reference only. 41