Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
HETERO JUNCTION FIELD EFFECT TRANSISTOR
NE3514S02
K BAND SUPER LOW NOISE AMPLIFIER
N-CHANNEL HJ-FET
Document No. PG10593EJ01V0DS (1st edition)
Date Published February 2006 CP(N)
FEATURES
•Super low noise figure and high associated gain
NF = 0.75 dB TYP., Ga = 10 dB TYP. @ f = 20 GHz
•Micro-X plastic (S02) package
APPLICATIONS
•20 GHz-band DBS LNB
•Other K-band communication systems
ORDERING INFORMATION
Part Number
Order Number
Package
Quantity
Marking
Supplying Form
NE3514S02-T1C
NE3514S02-T1C-A
S02 (Pb-Free)
2 kpcs/reel
D
• 8 mm wide embossed taping
•Pin 4 (Gate) faces the perforation side
of the tape
NE3514S02-T1D
NE3514S02-T1D-A
10 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: NE3514S02-A
ABSOLUTE MAXIMUM RATINGS (TA = +25C)
Symbol
Ratings
Unit
VDS
4
V
VGS
3
V
ID
IDSS
mA
IG
100
A
Ptot Note
165
mW
Tch
+125
C
Tstg
65 to +125
C
Note Mounted on 1.08 cm2 1.0 mm (t) glass epoxy PCB
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
2
NE3514S02
RECOMMENDED OPERATING CONDITIONS (TA = +25C)
Symbol
MIN.
TYP.
MAX.
Unit
VDS
1
2
3
V
ID
5
10
15
mA
Pin
0
dBm
ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise specified)
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
IGSO
VGS = 3 V
0.5
10
A
IDSS
VDS = 2 V, VGS = 0 V
15
40
70
mA
VGS (off)
VDS = 2 V, ID = 100
A
0.2
0.7
2.0
V
gm
VDS = 2 V, ID = 10 mA
40
55
mS
NF
VDS = 2 V, ID = 10 mA, f = 20 GHz
0.75
1.0
dB
Ga
8
10
dB
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
3
NE3514S02
TYPICAL CHARACTERISTICS (TA = +25C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
4
NE3514S02
S-PARAMETERS
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
5
NE3514S02
RF MEASURING LAYOUT PATTERN (REFERENCE ONLY) (UNIT: mm)
RT/duroid 5880/ROGERS
t = 0.254 mm
r = 2.20
tan delta = 0.0009 @10 GHz
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
6
NE3514S02
PACKAGE DIMENSIONS
S02 (UNIT: mm)
DISCONTINUED
Drop-In Replacement: CE3520K3
Data Sheet PG10593EJ01V0DS
7
NE3514S02
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature) : 260C or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220C or higher : 60 seconds or less
Preheating time at 120 to 180C : 12030 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
Partial Heating
Peak temperature (terminal temperature) : 350C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
DISCONTINUED
Drop-In Replacement: CE3520K3
8 Data Sheet PG10593EJ01V0DS
NE3514S02
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
DISCONTINUED
Drop-In Replacement: CE3520K3
NOTICE
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modication, copy
or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classied according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; ofce equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); trafc control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (articial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specied by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specied ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specic characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
re in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
re control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difcult, please evaluate the safety of the nal products or systems manufactured by you.
8. Please contact a California Eastern Laboratories sales ofce for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales ofce if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales ofces, representatives and distributors,
Please visit our website: www.cel.com/contactus
DISCONTINUED
Drop-In Replacement: CE3520K3