Patented*
®
JAN1N3611EG1thru
J AN1N3614EG1 and JAN1N3957EG1
Glass Passivated Rectifiers
Reverse V oltage 200 to 1000V
Forward Current 1.0A
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol JAN JAN JAN JAN JAN Unit
1N3611 1N3612 1N3613 1N3614 1N3957
Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V
Maximum RMS voltage VRMS 140 280 420 560 700 V
Maximum DC blocking voltage VDC 200 400 600 800 1000 V
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA= 55°CIF(AV) 1.0 A
Peak forward surge current 10 surges of 8.3ms each at
1 min. intervals super-imposed on IO= 1A DC; IFSM 30 A
VR= rated VRRM TA= 25°C (per MIL-STD-750 m 4066)
Typical thermal resistance (Note 1) RθJL 38 °C/W
RθJA 45
Operating junction and storage temperature range TJ,T
STG –65 to +175 °C
Barometric Pressure Hg 8 54 87 mm
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Minimum reverse breakdown voltage at 50µAV
BR 220 440 660 880 1100 V
Maximum instantaneous at 1.0A, TA= 25°C 1. 1
forward voltage Tp = 300µs at 3.0A, TA= 25°C VF1.3 V
at 1.0A, TA= –65°C 1.5
Maximum DC reverse current TA=25°CIR1µA
at rated DC blocking voltage TA= 150°C 300
Typical reverse recovery time at
IF = 0.5A, IR = 1.0A, Irr = 0.25A trr 2.0 µs
Typical junction capacitance at 4V, 1MHz CJ8.0 pF
Note: (1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 8/7/01
Features
• Qualified to MIL-PRF-19500/228
• Class 1 high temperature metallurgically bonded
construction brazed > 600°C
• 1.0 ampere operation at TA=55°C with no thermal runaway
• Typical IRless than 0.1µA
• Cavity-free, glass passivated junction. In epoxy over
hermetic glass.
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: DO-204AL, molded epoxy over glass body (EG1)
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any Weight: 0.015 ounce, 0.4 gram
Flammability: Epoxy is rated UL 94V-0.
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
Dimensions in inches and (millimeters)
* Glass-plastic encapsulation technique is covered by Patent No.
3,996,602 and brazed-lead assembly by Patent No. 3,930,306
DO-204AL (EG1)
M
I
L
I
T
A
R
Y
Q
U
A
L
I
F
I
E
D
Ratings and
Characteristic Curves (TA= 25°C unless otherwise noted)
25 50 75 100 125 150 175
0
0.25
0.5
0.75
1.0
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
10
1
020 40 60 80 100
0.01
0.1
1
10
Fig. 1 – Forward Current
Derating Curve Fig. 2 – Typical Instantaneous
Forward Characteristics
Fig. 3 – Typical Reverse
Characteristics
Fig. 5 – Typical Transient
Thermal Impedance
Fig. 4 – Typical Junction
Capacitance
Average Forward Rectified Current (A)
Ambient Temperature (¡C)
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Junction Capacitance (pF)
Reverse Voltage (V)
Instantaneous Reverse Current (µA)Transient Thermal Impedance (°C/W)
Rated Peak Reverse Voltage (%)
t, Pulse Duration, sec
60 Hz Resistive
or Inductive Load
0.375" (9.5mm)
Lead length
Pulse Width = 300µs
1% Duty Cycle
TJ = 25°C
TJ = 150°C
TJ = 125°C
TJ = 25°C
TJ = 75°C
100
10
20
10.1 110
0.01 0.1 110 100
0.1
1
10
100
TJ = 25°C
f = 1.0 MHz
Vsig = 50m Vp-p
JAN1N3611EG1thru
J AN1N3614EG1 and JAN1N3957EG1
Glass Passivated Rectifiers
