NOT RECOMMENDED FOR NEW DESIGN SBL3030PT - SBL3060PT 30A SCHOTTKY BARRIER RECTIFIER Features * * * * * * * Schottky Barrier Chip Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application Lead Free Finish, RoHS Compliant (Note 3) J S C K R Mechanical Data * * * * * * * * TO-3P Dim Min Max A 1.88 2.08 B 4.87 5.13 C 21.25 21.75 D 19.60 20.10 E 2.10 2.40 G 0.51 0.76 H 15.75 16.25 J 1.93 2.18 K 2.90 3.20 L 3.78 4.38 M 5.20 5.70 N 1.12 1.22 P 1.90 2.16 Q 2.93 3.22 R 11.70 12.80 S 4.40 Typical All Dimensions in mm A B H P Case: TO-3P Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Ordering Information: See Page 3 Marking: Type Number Weight: 5.6 grams (approximate) Q L G D N E M M Maximum Ratings and Electrical Characteristics @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol VRRM VRWM VR VR(RMS) Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 95C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Forward Voltage Drop @ IF = 15A, TC = 25C Peak Reverse Current @ TC = 25C at Rated DC Blocking Voltage @ TC = 100C Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: SBL SBL SBL SBL SBL SBL 3030PT 3035PT 3040PT 3045PT 3050PT 3060PT 30 35 40 21 24.5 28 Unit 45 50 60 V 31.5 35 42 V IO 30 A IFSM 275 A VFM 0.55 0.70 V CT RJc 1.0 75 1100 2.0 pF C/W Tj, TSTG -65 to +150 C IRM mA 1. Thermal resistance junction to case mounted on heatsink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. DS23018 Rev. 11 - 3 1 of 3 www.diodes.com SBL3030PT - SBL3060PT (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE RECTIFIED CURRENT (A) 30 24 18 12 6 0 100 50 TC, CASE TEMPERATURE (C) Fig. 1 Forward Derating Curve 150 SBL3030PT - SBL30450PT 10 SBL3050PT - SBL3060PT 1.0 0.1 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Fwd Characteristics per Element 4,000 300 Tj = 25C f = 1MHz 8.3 ms single half-sine-wave CT, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0 100 250 200 1,000 150 100 50 100 0.1 0 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Forward Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 1 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance per Element 100 100 10 1.0 0.1 0.01 120 40 80 PERCENT OF PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics per Element 0 DS23018 Rev. 11 - 3 2 of 3 www.diodes.com SBL3030PT - SBL3060PT (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN Ordering Information (Note 4) Packaging TO-3P TO-3P TO-3P TO-3P TO-3P TO-3P Device SBL3030PT SBL3035PT SBL3040PT SBL3045PT SBL3050PT SBL3060PT Notes: Shipping 30/Tube 30/Tube 30/Tube 30/Tube 30/Tube 30/Tube 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com DS23018 Rev. 11 - 3 3 of 3 www.diodes.com SBL3030PT - SBL3060PT (c) Diodes Incorporated