Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or u se.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/EB
EE103
A
.
EB
EB A
Series: Type :
Categor y temp. range
Rated W.V. Range
Nominal Cap. Range
Duration : 5000 hours (φ5×11 to 8×11.5), 7000hours (φ5×15 to φ6.3×15)
10000 hours (φ8×15 to 12.5×25) Post test requirement at +20 °C
I < 0.01 CV or 3(µ A)
after 2 minutes application of rated working
■ Dimensions in mm (not to scale)
Body Dia. φD
Lead Dia. φd
Lead space P
5 6.3 8 10 12.5 16 18
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2.0 2.5 3.5 5.0 5.0 7.5 7.5
60 120 1k
10k
100k
Frequency(Hz)Capacitance
(µF)
0.47 to 10
22 to 470
1000 to 3300 0.85 1 1.20 1.25 1.30
0.75 1 1.40 1.55 1.65
I < 0.06 CV + 10(µ A)
application of rated working voltage at +20°C
after 2 minutes
0.95 1 1.05 1.10 1.15
(160 to 450V.DC )
Duration : 5000hours
120 1k
10 to 30k
30k to 100k
W.V.(V.DC)
0.50 0.80 0.90 1.00
0.55 0.85 0.90 1.00
160 to 250
350 to 450
(>6.3mmdia)
L
L<16:L+1.0max
φd±
0.05
14 min 3
min
φD+0.5 max
φ10<
P
±
0.5
φD+0.5 max
φ8>
P
±
0.5
L>20:L+2.0 max
-40 to + 105°C -25 to + 105°C
10 to 63 V .DC 160 to 450 V .DC
0.47 to 3300 µ F 10 to 330 µ F
±20 % (120Hz/+20°C)
Radial Lead Type
■
Features
■ Specifications
DC Leakage Current
tan δ
Endurance
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
meet the limits specified bellow.
(10 to 63V.DC )
Capacitance change
tan δ
DC leakage current
±30% of initial measured value
< 300 % of initial specified value
< initial specified value
Capacitance change
tan δ
DC leakage current
±20% of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
(10 to 63 V. DC ) Frequency(Hz)
(160 to 450 V. DC )
Vent
Sleeve
Please see the attached standard products list
Japan
Malaysia
China
Endurance:105°C (5000 to 10000 h)
Capacitance Tolerance
High Ripple, High Frequeccy(
High Voltage)
voltage at +20°C(Whichever is greater)
■ Frequency correction factor for ripple current
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Rev. 02/04
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or u se.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/EB
EE104
■
10
50
63
16
25
35
Standard Products(Low Voltage)
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mA)
(V)
tan δ
(120Hz)
(+20°C)
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
Lead Length
W.V.
Straight Leads
Ripple
current
(120Hz)
(+105ûC) Taping
❉H
Min . Packaging Q 'ty
Straight
Taping
❉B
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, H=2.5mm.
100 5 15 105 0.30 7000 0.5 2.0 5.0 2.5 EEUEB1A101( ) 200 2000
5 11 66 0.30 5000 0.5 2.0 5.0 2.5 EEUEB1A101S( ) 200 2000
220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5 EEUEB1A221( ) 200 2000
6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5 EEUEB1A221S( ) 200 2000
470 8 15 278 0.30 10000 0.6 3.5 5.0 EEUEB1A471( ) 200 1000
8 11.5 180 0.30 5000 0.6 3.5 5.0 EEUEB1A471S( ) 200 1000
2200 12.5 20 540 0.32 10000 0.6 5.0 5.0 EEUEB1A222( ) 200 500
3300 12.5 25 802 0.34 10000 0.6 5.0 5.0 EEUEB1A332( ) 200 500
1000 10 20 430 0.25 10000 0.6 5.0 5. 0 EEUEB1C102( ) 200 500
2200 12.5 25 706 0.27 10000 0.6 5.0 5.0 EEUEB1C222( ) 200 500
47 5 15 78 0.22 7000 0.5 2.0 5.0 2.5 EEUEB1E470( ) 200 2000
5 11 55 0.22 5000 0.5 2.0 5.0 2.5 EEUEB1E470S( ) 200 2000
100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5 EEUEB1E101( ) 200 2000
6.3 11.2 95 0.22 5000 0.5 2.5 5. 0 2.5 EEUEB1E101S( ) 200 2000
220 8 11.5 125 0.22 5000 0.6 3.5 5 .0 EEUEB1E221S( ) 200 1000
330 8 15 255 0.22 10000 0.6 3.5 5.0 EEUEB1E331( ) 200 1000
470 10 16 321 0.22 10000 0.6 5.0 5.0 EEUEB1E471( ) 200 500
1000 12.5 20 498 0.22 10000 0.6 5.0 5.0 EEUEB1E102( ) 200 500
33 5 15 66 0.18 7000 0.5 2.0 5.0 2.5 EEUEB1V330( ) 200 2000
5 11 46 0.18 5000 0.5 2.0 5.0 2.5 EEUEB1V330S( ) 200 2000
220 8 15 197 0.18 10000 0.6 3.5 5.0 EEUEB1V221( ) 200 1000
330 10 16 278 0.18 10000 0.6 5.0 5.0 EEUEB1V331( ) 200 500
470 10 20 349 0.18 10000 0.6 5.0 5.0 EEUEB1V471( ) 200 500
1000 12.5 25 586 0.18 10000 0.6 5.0 5.0 EEUEB1V102( ) 200 500
0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1HR47S( ) 20 0 2000
1 5 11 8 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H1R0S( ) 20 0 2000
2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H2R2S( ) 200 2000
3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H3R3S( ) 200 2000
4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H4R7S( ) 200 2000
10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H100S( ) 200 2000
22 5 15 55 0.15 7000 0.5 2. 0 5.0 2.5 EEUEB1H220( ) 200 2000
5 11 39 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H220S( ) 200 2000
47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5 EEUEB1H470( ) 200 2000
6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5 EEUEB1H470S( ) 200 2000
100 8 11.5 99 0.15 5000 0.6 3.5 5.0 EEUEB1H101S( ) 200 1000
220 10 16 234 0.15 10000 0.6 5.0 5.0 EEUEB1H221( ) 200 500
330 10 20 293 0.15 10000 0.6 5.0 5.0 EEUEB1H331( ) 200 500
470 12.5 20 370 0.15 10000 0.6 5.0 5.0 EEUEB1H471( ) 200 500
0.47 5 15 6 0.12 7000 0.5 2. 0 5.0 2.5 EEUEB1JR47( ) 200 2000
5 11 4.5 0.12 5000 0.5 2.0 5.0 2.5 EEUEB1JR47S( ) 200 2000
1 5 15 12 0.12 7000 0.5 2.0 5.0 2.5 EEUEB1J1R0( ) 200 2000
5 11 9 0.12 5000 0.5 2.0 5.0 2.5 EEUEB1J1R0S( ) 200 2000
Endur-
ance
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or u se.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/EB
EE105
A
.
EB
■
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, H=2.5mm.
(mm)(mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mA)
(V)
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
Lead Length
W.V.
Straight Leads
Ripple
current
(120Hz)
(+105ûC) Taping
❉H
Min. Packaging Q'ty
Straight
Taping
❉B(mm)
Standard Products(Low Voltage)
2 .2 5 1 5 22 0.12 7000 0.5 2. 0 5. 0 2.5 EEUEB1J2R2( ) 200 2000
5 11 16.5 0.12 5000 0.5 2. 0 5. 0 2.5 EEUEB1J2R2S( ) 200 2000
3.3 5 15 30 0.12 7000 0.5 2. 0 5. 0 2.5 EEUEB1J3R3( ) 200 2000
5 11 20 0.12 5000 0.5 2. 0 5. 0 2.5 EEUEB1J3R3S( ) 200 2000
4.7 5 15 30 0.12 7000 0.5 2. 0 5. 0 2.5 EEUEB1J4R7( ) 200 2000
5 11 23 0.12 5000 0.5 2. 0 5. 0 2.5 EEUEB1J4R7S( ) 200 2000
10 5 15 46 0.12 7000 0.5 2. 0 5. 0 2.5 EEUEB1J100( ) 200 2000
5 11 30 0.12 5000 0.5 2. 0 5. 0 2.5 EEUEB1J100S( ) 200 2000
63 22 6.3 15 55 0.12 7000 0.5 2.5 5. 0 2.5 EEUEB1J220( ) 200 2000
33 6.3 15 71 0.12 7000 0.5 2.5 5. 0 2.5 EEUEB1J330( ) 200 2000
6.3 11.2 50 0.12 5000 0.5 2.5 5. 0 2.5 EEUEB1J330S( ) 200 2000
47 8 15 94 0.12 10000 0.6 3.5 5. 0 EEUEB1J470( ) 200 1000
8 11.5 80 0.12 5000 0.6 3.5 5. 0 EEUEB1J470S( ) 200 1000
100 8 15 180 0.12 10000 0.6 3.5 5. 0 EEUEB1J101( ) 200 1000
220 10 20 292 0.12 10000 0.6 5. 0 5. 0 EEUEB1J221( ) 200 500
330 12.5 20 381 0.12 10000 0.6 5. 0 5. 0 EEUEB1J331( ) 200 500
470 12.5 25 454 0.12 10000 0.6 5. 0 5. 0 EEUEB1J471( ) 200 500
tan δ
(120Hz)
(+20°C)
Endur-
ance
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
EE106
Aluminum Electrolytic Capacitor/EB
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or u se.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)
(mA)
(V)
160
200
350
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
Endurance : 105°C 5000 h
tan δ
(120Hz)
(+20°C)
Lead Space
■
Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
Lead Length
W.V.
Straight Leads
Ripple
current
(100kHz)
(+105ûC) Taping
❉B
Min. Packaging Q'ty
Straight
Standard Products
22 10 20 470 0.15 0.6 5.0 5.0 EEUEB2C220( ) 200 500
33 10 20 470 0.15 0.6 5.0 5.0 EEUEB2C330( ) 200 500
47 12.5 20 600 0.15 0.6 5.0 5.0 EEUEB2C470( ) 200 500
68 12.5 25 750 0.15 0.6 5.0 5.0 EEUEB2C680( ) 200 500
16 20 750 0.15 0.8 7.5 7.5 EEUEB2C680S( ) 100 250
100 16 25 1060 0.15 0.8 7.5 7.5 EEUEB2C101( ) 100 250
18 20 1060 0.15 0.8 7.5 7.5 EEUEB2C101S( ) 100 250
150 16 31.5 1280 0.15 0.8 7.5 EEUEB2C151 100
18 25 1280 0.15 0.8 7.5 7.5 EEUEB2C151S( ) 100 250
220 16 31.5 1280 0.15 0.8 7.5 EEUEB2C221 100
18 25 1280 0.15 0.8 7.5 7.5 EEUEB2C221S( ) 100 250
330 18 31.5 1690 0.15 0.8 7.5 EEUEB2C331 50
22 10 20 470 0.15 0.6 5.0 5.0 EEUEB2D220( ) 200 500
33 12.5 20 600 0.15 0.6 5.0 5.0 EEUEB2D330( ) 200 500
47 12.5 20 600 0.15 0.6 5.0 5.0 EEUEB2D470( ) 200 500
68 12.5 25 750 0.15 0.6 5.0 5.0 EEUEB2D680( ) 200 500
16 20 750 0.15 0.8 7.5 EEUEB2D680S 100
100 16 25 1060 0.15 0.8 7.5 7.5 EEUEB2D101( ) 100 250
18 20 1060 0.15 0.8 7.5 7.5 EEUEB2D101S( ) 100 250
150 16 31.5 1280 0.15 0.8 7.5 EEUEB2D151 100
18 25 1280 0.15 0.8 7.5 7.5 EEUEB2D151S( ) 100 250
220 18 31.5 1690 0.15 0.8 7.5 EEUEB2D221 100
22 12.5 20 560 0.15 0.6 5.0 5.0 EEUEB2E220( ) 20 0 500
33 12.5 20 560 0.15 0.6 5.0 5.0 EEUEB2E330( ) 200 500
47 12.5 25 710 0.15 0.6 5.0 5.0 EEUEB2E470( ) 200 500
16.0 20 710 0.15 0.8 7.5 7.5 EEUEB2E470S( ) 100 250
250 68 16 25 990 0.15 0.8 7.5 7.5 EEUEB2E680( ) 100 250
18 20 990 0.15 0.8 7.5 7.5 EEUEB2E680S( ) 100 250
100 16 31.5 1200 0.15 0.8 7.5 EEUEB2E101 100
18 25 1200 0.15 0.8 7.5 7.5 EEUEB2E101S( ) 100 250
150 18 31.5 1470 0.15 0.8 7.5 EEUEB2E151 50
10 10 20 270 0.20 0.6 5.0 5.0 EEUEB2V100( ) 200 500
22 12.5 20 350 0.20 0.6 5.0 5.0 EEUEB2V220( ) 200 500
33 16 20 480 0.20 0.8 7.5 7.5 EEUEB2V330S( ) 100 250
47 16 25 640 0.20 0.8 7.5 7.5 EEUEB2V470( ) 100 250
18 20 640 0.20 0.8 7.5 7.5 EEUEB2V470S( ) 100 250
68 16 31.5 780 0.20 0.8 7.5 EEUEB2V680 100
18 25 780 0.20 0.8 7.5 7.5 EEUEB2V680S( ) 100 250
100 18 31.5 970 0.20 0.8 7.5 EEUEB2V101 50
10 10 20 250 0.24 0.6 5.0 5.0 EEUEB2G100( ) 200 500
400 22 12.5 25 410 0.24 0.6 5.0 5.0 EEUEB2G220( ) 200 500
16 20 410 0.24 0.8 7.5 7.5 EEUEB2G220S( ) 100 250
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
EE107
Aluminum Electrolytic Capacitor/EB
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or u se.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
A
.
EB
■Standard Products
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
Endurance : 105°C 5000 h
450
400
(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)
(mA)
(V)
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
Lead Length
W.V.
Straight Leads
Ripple
current
(100kHz)
(+105ûC) Taping
❉B
Min. Packaging Q'ty
Straight
33 16 25 600 0.24 0.8 7.5 7.5 EEUEB2G330( ) 100 250
18 20 600 0.24 0.8 7.5 7.5 EEUEB2G330S( ) 1 0 0 250
47 16 31.5 730 0.24 0.8 7.5 EEUEB2G470 100
18 25 730 0.24 0.8 7.5 7.5 EEUEB2G470S( ) 1 0 0 250
10 12.5 20 310 0.24 0.6 5.0 5.0 EEUEB2W100( ) 2 00 500
22 16 25 560 0.24 0.8 7.5 7.5 EEUEB2W220( ) 100 250
18 20 560 0.24 0.8 7.5 7.5 EEUEB2W220S( ) 1 00 250
33 16 31.5 680 0.24 0.8 7.5 EEUEB2W330 100
18 25 680 0.24 0.8 7.5 7.5 EEUEB2W330S( ) 1 00 250
47 18 31.5 850 0.24 0.8 7.5 EEUEB2W470 50
tan δ
(120Hz)
(+20°C)
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
