POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 1 of 7
R
R
RO
O
OH
H
HS
S
S
c
c
co
o
om
m
mp
p
pl
l
li
i
ia
a
an
n
nc
c
ce
e
e
WF25H
±0.1%, ±0.5%
Power chip high precision resistors
Size 2512
Customer :
Approval No :
Issue Date :
Customer Approval :
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 2 of 7
FEATURE
1. High power rating and compact size
2. High reliability and stability
3. Reduced size of final equipment
4. High precision of resistance
APPLICATION
Power supply
PDA
Digital meter
Computer
Automotives
Battery charger
DC-DC power converter
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are
added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The
composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to
nominated value within tolerance which controlled by laser trimming of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For
ease of soldering the outer layer of these end terminations is a Lead-tin or Tin (lead free) alloy.
Fig 1. Consctruction of Chip-R
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 3 of 7
QUICK REFERENCE DATA
Item General Specification
Series No. WF25H
Size code 2512 ( 6432 )
Resistance Tolerance ±0.5% ; ±0.1% (E24+E96)
Resistance Range 1 ~ 10M,
TCR (ppm/°C) 1 Rn < 9.76
10 Rn < 1M
1M Rn < 10M
± 300 ppm/°C
± 200 ppm/°C
± 300 ppm/°C
Max. dissipation at Tamb=70°C 1 W
Max. Operation Voltage (DC or RMS) 250V
Max. Overload Voltage (DC or RMS) 500V
Climatic category (IEC 60068) 55/155/56
Note :
1. This is the maximum voltage that may be continuously supplied to the resistor element, see IEC publication
60115-8
2. Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by
ValueResistancePower RatedRCWV ×= or Max. RCWV listed above, whichever is lower.
MECHANICAL DATA
Symbol Dimensions (mm)
L 6.40±0.20
W 3.20±0.20
T 0.60±0.10
Tt 0.65±0.25
Tb 0.90±0.25
MASS ( per 100pcs ) : 4.25 gram
MARKING
Each resistor is marked with a four-digit code on the protective coating to designate the nominal resistance
value.
Example:
1R00 = 1
1001 = 1000
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 4 of 7
FUNCTIONAL DESCRIPTION
Product characterization
Standard values of nominal resistance are taken from the E96 & E24 series for resistors with a tolerance of
±0.5% & ±0.1%. The values of the E24/E96 series are in accordance with IEC publication 60063.
Derating curve
The power that the resistor can dissipate depends on the operating temperature; see Fig.2
MOUNTING
Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by
automatic placement systems.
Chip placement can be on ceramic substrates and printed-circuit boards (PCBs).
Electrical connection to the circuit is by individual soldering condition.
The end terminations guarantee a reliable contact.
SOLDERING CONDITION
The robust construction of chip resistors
allows them to be completely immersed in a
solder bath of 260°C for one minute.
Therefore, it is possible to mount Surface
Mount Resistors on one side of a PCB and
other discrete components on the reverse
(mixed PCBs).
Surface Mount Resistors are tested for
solderability at 230°C during 2 seconds. The
test condition for no leaching is 260°C for 60
seconds. Typical examples of soldering
processes that provide reliable joints without
any damage are given in Fig 3.
Fig 3. Infrared soldering profile for Chip Resistors
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 5 of 7
CATALOGUE NUMBERS
The resistors have a catalogue number starting with :
WF25 H 1000 B T _
Size code
WF25 : 2512
Type code
H : High
precision
TC100
Resistance code
E24+E96 : 3 significant digits followed
by no. of zeros
102 =1020
37.4K =3742
Tolerance
B : ±0.1%
D : ±0.5%
Packaging code
T : 7 Reel taping
Termination code
_ = SnPb base (_
means a blank)
L = Sn base (lead
free)
TEST AND REQUIREMENTS
Essentially all tests are carried out according to the schedule of IEC publication 115-8, category LCT/UCT/56 (rated
temperature range : Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days). The
testing also meets the requirements specified by EIA, EIAJ and JIS.
The tests are carried out in accordance with IEC publication 68, "Recommended basic climatic and mechanical robustness
testing procedure for electronic components" and under standard atmospheric conditions according to IEC 60068-1,
subclause 5.3. Unless otherwise specified, the following value supplied :
Temperature: 15°C to 35°C.
Relative humidity: 45% to 75%.
Air pressure: 86kPa to 106 kPa (860 mbar to 1060 mbar).
All soldering tests are performed with midly activated flux.
TEST PROCEDURE REQUIREMENT
DC resistance DC resistance values measured at the test voltages
specified below :
<10@0.1V, <100@0.3V, <1K@1.0V,
<10K@3V, <100K@10V, <1M@25V,
<10M@30V
Within the specified tolerance
Temperature
Coefficient of
Resistance
( TCR )
Natural resistance change per change in degree
centigrade.
( )
6
121
12 10×
ttR RR (ppm/°C)
R1 : Resistance at reference temperature
R2 : Resistance at test temperature
t1 : 25°C
Test temperature 55 ~ +155°C
1 Rn < 9.76, ± 300 ppm/°C
10 Rn < 1M, ± 200 ppm/°C
1M Rn < 10M, ± 300 ppm/°C
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 6 of 7
TEST PROCEDURE REQUIREMENT
Short time
overload ( STOL )
Permanent resistance change after a 5second application of a
voltage 2.5 times RCWV or the maximum overload voltage
specified in the above list, whichever is less.
R/R max. ±(1%+0.05)
Resistance to
soldering heat Unmounted chips 10±1 seconds, 260±5ºC no visible damage
R/R max. ±(1%+0.05)
Solderability Termination SnPb base : Unmounted chips completely
immersed for 2±0.5 sec. in a solder bath at 230±5ºC
Termination Sn base (lead free) : Unmounted chip completely
immersed in a lead free solder bath, 245°C±5°C, 3±1 sec
good tinning (>95% covered)
no visible damage
Temperature
cycling 1. 30 minutes at -55°C±3°C,
2. 2~3 minutes at room temperature,
3. 30 minutes at +155°±3°C,
4. 2~3 minutes at room temperature,
Total 5 continuous cycles
no visible damage
R/R max. ±(1%+0.05)
Load life
(endurance) 70±2ºC, 1000 hours, loaded with RCWV or Vmax,1.5 hours on
and 0.5 hours off R/R max. ±(3%+0.1)
Load life in
Humidity 1000 hours, at rated continuous working voltage in humidity
chamber controller at 40°C±2°C and 90~95% relative humidity,
1.5hours on and 0.5 hours off
R/R max. ±(3%+0.1)
Bending and
Termination
strength
Resistors mounted on a 90mm glass epoxy resin PCB(FR4);
bending : 2 mm, once for 10 seconds
Pulling test : 500grams
R/R max. ±(1%+0.05)
POE International Corp
M01-00-E-07
SPECIFICATION OF POWER CHIP HIGH PRECISION RESISTOR
Ver: 1
Page: 7 of 7
PACKAGING
Plastic tape specifications (unit :mm)
Symbol A B W F E
Dimensions 6.90±0.20 3.60±0.20 12.00±0.30 5.50±0.1 1.75±0.10
Symbol P1 P0 ΦD T
Dimensions 4.00±0.10 4.00±0.10 1.0 0.0
50.1 +
Φ Max. 1.2
Reel dimensions
Symbol A B C D
(unit : mm) Φ178.0±2.0 Φ60.0±1.0 13.0±0.2 14.0±0.2
Taping quantity
- Chip resistors 4,000 pcs per reel.