SB120~SB160 SCHOTTKY BARRIER RECTIFIERS VOLTAGE 20 to 60 Volts CURRENT DO-41 1.0 Amperes Unit: inch(mm) FEATURES * Plastic package has Underwriters Laboratory .034(.86) .028(.71) 1.0(25.4)MIN. Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. * Exceeds environmental standards of MIL-S-19500/228 * For use in low voltage,high frequency inverters ,free wheeling , and polarity protection applications . .205(5.2) .160(4.1) * Lead free in comply with EU RoHS 2002/95/EC directives MECHANICALDATA * Case: DO-41 Molded plastic 1.0(25.4)MIN. .107(2.7) * Terminals: Axial leads, solderable per MIL-STD-750,Method 2026 * Polarity: Color band denotes cathode * Mounting Position: Any .080(2.0) * Weight: 0.0118 ounces, 0.336grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. PARAMETER SYMBOL S B 120 S B 130 S B 140 S B 150 S B 160 UNITS Maximum Recurrent Peak Reverse Voltage VR R M 20 30 40 50 60 V Maximum RMS Voltage VR M S 14 21 28 35 42 V Maximum DC Blocking Voltage VD C 20 30 40 50 60 V Maximum Average Forward Rectified Current .375"(9.5mm) lead length (See Figure1) IF (A V ) 1.0 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load(JEDEC method) IF S M 30 A Maximum Forward Voltage at 1.0A VF 0.5 0.7 V Maximum DC Reverse Current TJ =25O C at Rated DC Blocking Voltage TJ =100O C IR 0.2 10 0.1 10 mA Typical Thermal Resistance Operating Junction and Storage Temperature Rang STAD-MAR.18.2009 1 RJ A TJ ,TS T G O 50 -55 to +125 -55 to +150 C/W O C PAGE . 1 SB120~SB160 1.0 =20-30V =40-60V .75 .50 SINGLEPHASEHALFWAVE60Hz RESISTIVEORINDUCTIVELOAD P.C.B MOUNTED ON 0.2 X 0.2"( 5.0 X 5. 0mm) COPPERPADAREAS .25 0 0 25 50 75 100 125 150 175 o PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES 30 25 20 15 10 5 0 1 10 LEAD TEMPERATURE, C NO. OF CYCLE AT 60Hz Fig.1-FORWARD CURRENT DERATING CURVE Fig.2- MAXIMUM NON-REPETITIVEPEAKFORWARD SURGE CURRENT 10 4 10 3 10 2 10 1 10 0 FORWARD CURRENT , AMPERES REVERSE CURRENT ,m A 10 5 10 O T J =125 C O T J =75 C 10 -1 10 -2 100 O T J =25 C 20-40V 0.1 O T A = 25 C 0.01 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE ,% Fig.3-TYPICAL REVERSE CHARACTERISTIC STAD-MAR.18.2009 1 50-60V 1.0 0 0.2 0.4 0.6 0.8 1.0 FORWARD VOLTAGE , VOLTS Fig.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PAGE . 2 SB120~SB160 Disclaimer z Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. z Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. z Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. z Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. z Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. z The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. STAD-MAR.18.2009 1 PAGE . 3