MBRS320 MBRS320 Features * Compact surface mount with J-bend leads (SMC) * 3.0 Watt Power Dissipation package * 3.0 Ampere, forward voltage less than 500 mV SMC (D0-214AB) Color Band Denotes Cathode Top Mark: B32 3.0 Schottky Power Rectifier Absolute Maximum Ratings* Symbol IF(AV) TA = 25C unless otherwise noted Parameter Value Units 3.0 4.0 80 A A A RJL Average Rectified Forward Current (TL = 100C) (TL = 90C) Surge Non Repetitive Forward Current (Half wave, single phase, 60 Hz) Junction to Case for Thermal Resistance 11 C/W Tstg Storage Temperature -65 to +150 C Tj max Maximum Junction Temperature -65 to +125 C IFSM *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics TA = 25C unless otherwise noted Symbol Parameter VRRM Repetitive Peak Reverse Voltage IRM Maximum Reverse Leakage Current @ VFM Maximum Forward Voltage, (Note 1) @ VR = 20 V, Tj = 25 C VR = 20 V, Tj = 100 C IF = 3.0A, Tj = 25 C Value Units 20 V 2.0 20 500 mA mA mV Note 1: Pulse Test: Pulse width <300s, Duty Cycle < 2% 2001 Fairchild Semiconductor Corporation MBRS320, Rev. A1 (continued) Typical Characteristics 2 1 100 C 25 C 0.5 0.2 0.1 0.05 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 V F - FORWARD VOLTAGE (V) 0.9 1 Reverse Leakage Current vs Temperature 10 5 125 C 1 100 C 75 C 0.1 0.01 25 C 0.001 0 2 I 5 4 6 8 10 12 14 16 V R - REVERSE VOLTAGE (V) 18 20 Capacitance vs. Reverse Bias Voltage 400 T A = +25 C CAPACITANCE (pF) I F - FORWARD CURRENT (A) 10 R- REVERSE LEAKAGE CURRENT (mA) Forward Voltage vs Temperature 350 300 250 200 150 100 0 5 10 15 V R - REVERSE BIAS VOLTAGE (V) 20 MBRS320, Rev. A1 MBRS320 Schottky Barrier Rectifier DO-214AB(SMC) Tape and Reel Data DO-214AB(SMC) Packaging Configuration: Figure 1.0 Packaging Description: DO-214AB(SMC) parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. Alternate carrier tape is made of antistatic plastic. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 7,500 units per 13" or 330cm diameter reel. The reel comes in plastic or carton which is made of polystyrene plastic (anti-static coated) and thick white paper respectively. Further information is described in the Packaging Information table. Antistatic Cover Tape These full reels are individually labeled and placed inside a bleach box (illustrated in figure 1.0) made of recyclable carton paper with a Fairchild logo printing. One box contains two reels maximum. Certain number of these boxes are placed inside shipping box which comes in different sizes depending on the number of parts shipped. Embossed Carrier Tape Human Readable/ Barcode Label Cathode F924 B34 F924 B34 F924 B34 F924 B34 F924 B34 DO-214AB(SMC) unit orientation DO-214AB(SMC) Packaging Information Packaging Option Packaging type Under package code P5 TNR Under package code MA TNR 3,000 3,000 13 13 Qty per Reel/Tube/Bag Reel Size (inch diameter) Box Dimension (mm) 336x336x38 336X336X38 Max qty per Box 6,000 6,000 Weight per unit (gm) 0.210 0.210 Weight per Reel (kg) 1.130 1.130 Human readable label Barcode label Note/Comments Human Readable/Barcode Label (on top) 336mm x 336mm x 38mm Intermediate container for 13" reel option Human Readable Label sample Human readable/barcode Label CAUTION: This container provides protection for static sensitive devices. Handle devices with caution upon removal. MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN, EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIWAN, THAILAND, SINGAPORE AND JAPAN. I.D. MBRS340 ANTI-STATIC D/C T0012 Lot F63TNR Label sample Qty 3000 CBVK741B019 LOT: CBVK741B019 QTY: 3000 FSID: MBRS340 SPEC: D/C1: T0012 QTY1: SPEC REV: D/C2: QTY2: CPN: FAIRCHILD SEMICONDUCTOR INTERNATIONAL DO-214AB(SMC) Tape Leader and Trailer Configuration: Figure 2.0 (F63TNR)3.2 Carrier Tape Cover Tape Trailer Tape 160mm minimum or (c)2000 Fairchild Semiconductor International Components Leader Tape 390mm minimum July 2000, Rev. A DO-214AB(SMC) Tape and Reel Data, continued DO-214AB(SMC) Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 DO-214AB(SMC) (12mm) 6.00 +/-0.15 8.25 +/-0.20 W 16.0 +/-0.3 D0 D1 1.55 +/-0.05 E1 1.125 +/-0.125 1.75 +/-0.10 E2 F P1 P0 10.25 min 7.5 +/-0.05 8.0 +/-0.1 4.0 +/-0.1 K0 T 2.4 +/-0.30 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 0.40 +/-0.10 Tc 13.0 +/-0.3 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Wc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) Component Rotation DO-214AB(SMC) Reel Configuration: Figure 4.0 W1 Measured at Hub B Min Dim C Dim A max Dim D min Dim N DETAIL AA See detail AA 13" Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Si ze 12mm Reel Option 13" Dia Dim A Dim B 13.0 330 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 1.97 50 min Dim W1 0.646 +0.078/-0.000 16.4 +2/-0 Dim W2 0.724 18.4 July 2000, Rev. A DO-214AB(SMC) Package Dimensions DO-214AB(SMC) (FS PKG Code P7) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.21 0.280 (7.112) 0.260 (6.604) 0.128 (3.25) 0.108 (2.743) 2 6.18 5.98 1 0.245 (6.223) 0.220 (5.588) 0.320 (8.128) 0.305 (7.747) 3.27 3.07 + 4.69 4.49 7.67 7.47 0.103 (2.616) 0.079 (2.007) Minimum Recommended Land Pattern 0.012 (0.305) 0.006 (0.152) 0.060 (1.524) 0.030 (0.762) 0.008 (0.203) 0.002 (0.51) (c)2000 Fairchild Semiconductor International August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H3