AP4509AGM-HF - Advanced Power Electronics Corp. USA

Advanced Power N AND P-CHANNEL ENHANCEMENT

Electronics Corp. MODE POWER MOSFET

▼ Simple Drive Requirement N-CH BVDSS 30V

▼ Low Gate Charge RDS(ON) 10mΩ

▼ Fast Switching Performance ID11.2A

▼ RoHS Compliant & Halogen-Free P-CH BVDSS -30V

RDS(ON) 21mΩ

Description ID-8A

Absolute Maximum Ratings

Symbol Parameter Rating Units

N-channel P-channel

VDS Drain-Source Voltage 30 -30 V

VGS Gate-Source Voltage +20 +20 V

ID@TA=25℃Continuous Drain Current3 11.2 -8.0 A

ID@TA=70℃Continuous Drain Current3 9.0 -6.4 A

IDM Pulsed Drain Current1 40 -30 A

PD@TA=25℃Total Power Dissipation W

TSTG Storage Temperature Range -55 to 150 ℃

TJOperating Junction Temperature Range -55 to 150 ℃

Symbol Value Unit

Rthj-a Maximum Thermal Resistance, Junction-ambient362.5 ℃/W

Data and specifications subject to change without notice

200912221

Parameter

Thermal Data

AP4509AGM-HF

Halogen-Free Product

S1G1S2G2

D1 D1 D2 D2

SO-8

Advanced Power MOSFETs from APEC provide the

designer with the best combination of fast switching,

ruggedized device design, low on-resistance and cost-

effectiveness.

The SO-8 package is widely preferred for commercial-industrial

surface mount applications and suited for low voltage applications

such as DC/DC converters.

N-CH Electrical Characteristics@Tj=25oC(unless otherwise specified)

Symbol Parameter Test Conditions Min. Typ. Max. Units

BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=250uA 30 - - V

RDS(ON) Static Drain-Source On-Resistance2VGS=10V, ID=10A - - 10 mΩ

VGS=4.5V, ID=7A - - 16 mΩ

VGS(th) Gate Threshold Voltage VDS=VGS, ID=250uA 1 - 3 V

gfs Forward Transconductance VDS=10V, ID=10A - 20 - S

IDSS Drain-Source Leakage Current VDS=24V, VGS=0V - - 10 uA

IGSS Gate-Source Leakage VGS=+20V, VDS=0V - - +100 nA

QgTotal Gate Charge2ID=10A - 12 19.2 nC

Qgs Gate-Source Charge VDS=15V - 2.5 - nC

Qgd Gate-Drain ("Miller") Charge VGS=4.5V - 7.5 - nC

td(on) Turn-on Delay Time2VDS=15V - 9 - ns

trRise Time ID=1A - 6.5 - ns

td(off) Turn-off Delay Time RG=3.3Ω,VGS=10V - 23 - ns

tfFall Time RD=15Ω- 9.5 - ns

Ciss Input Capacitance VGS=0V - 715 1140 pF

Coss Output Capacitance VDS=25V - 220 - pF

Crss Reverse Transfer Capacitance f=1.0MHz - 160 - pF

RgGate Resistance f=1.0MHz - 2.2 - Ω

Source-Drain Diode

Symbol Parameter Test Conditions Min. Typ. Max. Units

VSD Forward On Voltage2IS=1.7A, VGS=0V - - 1.2 V

trr Reverse Recovery Time2IS=10A, VGS=0V, - 27 - ns

Qrr Reverse Recovery Charge dI/dt=100A/µs - 18 - nC

AP4509AGM-HF

AP4509AGM-H

P-CH Electrical Characteristics@Tj=25oC(unless otherwise specified)

Symbol Parameter Test Conditions Min. Typ. Max. Units

BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=-250uA -30 - - V

RDS(ON) Static Drain-Source On-Resistance2VGS=-10V, ID=-7A - - 21 mΩ

VGS=-4.5V, ID=-5A - - 32 mΩ

VGS(th) Gate Threshold Voltage VDS=VGS, ID=-250uA -1 - -3 V

gfs Forward Transconductance VDS=-10V, ID=-7A - 15 - S

IDSS Drain-Source Leakage Current VDS=-24V, VGS=0V - - -10 uA

IGSS Gate-Source Leakage VGS=+20V, VDS=0V - - +100 nA

QgTotal Gate Charge2ID=-7A - 15 24 nC

Qgs Gate-Source Charge VDS=-15V - 3 - nC

Qgd Gate-Drain ("Miller") Charge VGS=-4.5V - 8 - nC

td(on) Turn-on Delay Time2VDS=-15V - 10.5 - ns

trRise Time ID=-1A - 6.5 - ns

td(off) Turn-off Delay Time RG=3.3Ω,VGS=-10V - 40 - ns

tfFall Time RD=15Ω-29-ns

Ciss Input Capacitance VGS=0V - 1260 2000 pF

Coss Output Capacitance VDS=-25V - 210 - pF

Crss Reverse Transfer Capacitance f=1.0MHz - 185 - pF

RgGate Resistance f=1.0MHz - 5.6 - Ω

Source-Drain Diode

Symbol Parameter Test Conditions Min. Typ. Max. Units

VSD Forward On Voltage2IS=-1.7A, VGS=0V - - -1.2 V

trr Reverse Recovery Time2IS=-7A, VGS=0V, - 22 - ns

Qrr Reverse Recovery Charge dI/dt=100A/µs - 12 - nC

Notes:

1.Pulse width limited by Max. junction temperature.

2.Pulse test

3.Surface mounted on 1 in2 copper pad of FR4 board ; 135 ℃/W when mounted on Min. copper pad.

THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.

USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.

APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED

HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN.

AP4509AGM-H

N-Channel

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics

30 -30

Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance

v.s. Junction Temperature

Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s.

Reverse Diode Junction Temperature

01234

VDS , Drain-to-Source Voltage (V)

ID , Drain Curre nt (A)

TA=25

℃

10V

7.0V

6.0V

5.0V

VG=4.0V

012345

VDS , Drain-to-Source Voltage (V)

ID , Drain Curre nt (A)

TA=150

℃

10V

7.0V

6.0V

5.0V

VG=4.0V

246810

VGS , Gate-to-Source Voltage (V)

RDS(ON0 (m

)

ID= 7A

TA= 25 oC

0.6

1.0

1.4

1.8

-50 0 50 100 150

Tj , Junction Temperature ( oC)

Normal ized RDS(ON)

ID=10A

VG=10V

0 0.2 0.4 0.6 0.8 1 1.2 1.4

VSD , Source-to-Drain Voltage (V)

IS(A)

Tj=25oC

Tj=150 oC

0.4

0.6

0.8

1.0

1.2

1.4

-50 0 50 100 150

Tj , Junction Temperature ( oC)

Normal ized V GS(th) (V)

P4509AGM-H

N-Channel

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics

30 -30

Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance

Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform

4.5V

QGS QGD

Charge

0 4 8 12 16 20 24

QG , Total Gate Charge (nC)

VGS , Gate to Source Voltage (V)

D=10A

VDS =15V

200

400

600

800

1000

1 5 9 13 17 21 25 29

VDS , Drain-to-Source Voltage (V)

C (pF)

=1.0MHz

Ciss

Coss

Crss

0.01

0.1

100

0.01 0.1 1 10 100

VDS , Drain-to-Source Voltage (V)

ID (A)

TA=25oC

Single Pulse

100us

1ms

10ms

100ms

0.001

0.01

0.1

0.0001 0.001 0.01 0.1 1 10 100 1000

t , Pulse Width (s)

Normalized Thermal Response (R thja)

PDM

Duty factor = t/T

Peak Tj = PDM x Rthja + Ta

Rthja=135oC/W

0.02

0.01

0.05

0.1

0.2

Duty factor=0.5

Single Pulse

td(on) trtd(off) tf

VDS

VGS

10%

90%

Operation in this

area limited by

RDS(ON)

AP4509AGM-H

P-Channel

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics

30 -30

Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance

v.s. Junction Temperature

Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s.

Reverse Diode Junction Temperature

01234

-VDS , Drain-to-Source Voltage (V)

-ID , Drain Current (A)

TA=25oC-10V

-7.0V

-6.0V

-5.0V

VG=- 4.0V

012345

-VDS , Drain-to-Source Voltage (V)

-ID , Drain Current (A)

TA= 150 oC-10V

-7.0V

-6.0V

-5.0V

VG=- 4.0V

246810

-VGS , Gate-to-Source Voltage (V)

RDS(ON) (m

)

ID= -5 A

TA=25oC

0.6

0.8

1.0

1.2

1.4

1.6

-50 0 50 100 150

Tj , Junction Temperature ( oC)

Normal ized RDS(ON)

ID= -7 A

VG= - 10V

0 0.2 0.4 0.6 0.8 1 1.2 1.4

-VSD , Source-to-Drain Voltage (V)

-IS(A)

Tj=25oC

Tj=150 oC

0.4

0.6

0.8

1.0

1.2

1.4

1.6

-50 0 50 100 150

Tj , Junction Temperature ( oC)

Normal ized -VGS(th) (V)

P4509AGM-H

P-Channel

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics

30 -30

Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance

Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform

-4.5V

QGS QGD

Charge

0.0 8.0 16.0 24.0 32.0

QG , Total Gate Charge (nC)

-VGS , Gate to Source Voltage (V)

D= -7A

VDS = -15V

400

800

1200

1600

2000

1 5 9 1317212529

-VDS , Drain-to-Source Voltage (V)

C (pF)

=1.0MHz

Ciss

Coss

Crss

0.01

0.1

100

0.01 0.1 1 10 100

-VDS , Drain-to-Source Voltage (V)

-ID (A)

TA=25oC

Single Pulse

100us

1ms

10ms

100ms

0.001

0.01

0.1

0.0001 0.001 0.01 0.1 1 10 100 1000

t , Pulse Width (s)

Normalized Thermal Response (R thja)

PDM

Duty factor = t/T

Peak Tj = PDM x Rthja + Ta

Rthja=135oC/W

0.02

0.01

0.05

0.1

0.2

Duty factor=0.5

Single Pulse

td(on) trtd(off)tf

VDS

VGS

10%

90%

Operation in this

area limited by

RDS(ON)