WIMA SMD 4036 WIMA SMD 8067 WIMA SMD 5045 BWIMASMD 11580 WIMA SMD 6560 WIMASMD 13595 Metallized polyester SMD capacitors for stringent requirements @ Capacitance values from 0.01 pF to 33 pF with rated voltages from 40 VDC through 2000 VDC. The entire range is spread over the size codes 4036, 5045, 6560, 8067, 11580 and 13595 allowing to realize SMD plastic film capacitors with higher capacitances and rated voltages. @ The entire surface of the end sides being used as soldering surface results in excellent soldering quality. @ The excellent electrical properties open up applications where quality and reliability are of importance. M@ Available taped and reeled up to and including size code 6560. Technical Data Temperature characteristics: See graph page 30. Dissipation factors at +20 C: tand Dielectric: Polyethylene terephthalate film. Capacitor electrodes: Vacuum deposited aluminium. at C < 0.1 pF]O.1 uF <C < 1.0 uF C >1.0 uF Encapsulation: Flame-retardent plastic case, UL 94 V-0, with epoxy resin seal. Colour: Black. Marking: Silver. 1 kHz < 8x10% < 8x103 < 10x103 Temperature range: -55 C to +100 C 10 kHz < 15x10% <15x10% Test specifications: In accordance with IEC 60384-19 100 kHz < 30x103 - and EN 132200 (u. prep.). Test category: 55/100/56 in accordance with IEC. Test voltage: 1.4 Ur, 2 sec. Insulation resistance at +20 C: Vibration: 6 hours at 10...2000 Hz and 0.75 mm displace- In accordance with IEC 60384-19 and EN 132 200 (u. prep.}. Measuring time: | min. Capacitance tolerances: +20 %, +10 %, (+5 % available subject to special enquiry). Maximum pulse rise time: ment amplitude or 10 g in accordance with IEC 60068-2-6. Ur Utest C < 0.33 uF 0.33 HF<C< 33 uF Low air density: | kPa=10 mbar in accordance with IEC 60068-2-13. 40VDC} IOV) 5 375,103 MO |>1250 sec (MQ x uF) Bump test: 4000 bumps at 390 m/sec? in accordance with 63 VDC} 50 V IEC 60068-2-29. M lue:1x104 MQ] M lue:3000 100 VDC 100 ven Ye ean valve sec Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85 C for DC voltages and from 250 VDCI100 V 2 1x104 MQ 2 3000 sec +75 C for AC voltages. Mean value:5x104 MQ|Mean value: 10000sec Resistance to soldering heat: Solder bath temperature max. 260 C. Soldering duration max. 5 sec. Change in capacitance AC/C<5 %. In accordance with DIN IEC 60068-2-20 (test Tb). Soldering process: Wave soldering and re-flow soldering (see temperature/time graphs page 29). Capacitance Pulse rise time V/tisec LF max. operation/test 40 VDC | 63 VDC | 100 VDC | 250 VDC | 400 VDC | 630 VDC {1000 VDC |1500 VDC | 2000 VDC 0.01 ...0.022 - - - - - 40/400 50/500 50/500 | 60/600 0.033 ...0.068 - - - - 21/210 | 25/250 32/320 35/350 | 40/400 0.1 ...0.22 - 10/100 | 12/120 14/140 | 17/170 20/200 35/350| 40/400 0.33 ...0.68 - - 8/80 9/90 10/100 | 13/130 20/200 - - 1.0 ...2.2 5/50 6/60 6/60 7/70 9/90 13/130 - - - 3.3 ...6.8 3/30 3/30 6/60 6/60 - - - - - 10 ...33 2/20 2/20 5/50 - - - - - - for pulses equal to the rated voltage. 17 General Data Capacitance] 40 VDC/25 VAC* | 63 VDC/40 VAC | 100 VD(/63 VAC" |250 VDC/160 VAC* 1400 VDC/200 VAC") 630 VDC/300 VAC* | 000 VDC/400 VAC* 11500 VDC/400 VAC*I2000 VDC/400 VAC} 0.01 pF 4036 5045 5045 6560 0.015" 4036 5045 6560 8067 0.022 " 5045 6560 6560 8067 0.033 " 5045 6560 8067 11580 0.047 " 4036 5045 6560 8067 11580 0.068 " 4036 6560 8067 11580 13595 0.1 yF 4036 5045 6560 8067 11580 13595 0.15 " 4036 5045 6560 11580 13595 0.22 " 4036 5045 6560 8067 11580 13595 0.33 " 4036 5045 6560 8067 13595 0.47 " 5045 6560 6560 11580 13595 0.68 " 5045 6560 8067 11580 1.0 uF 4036 5045 6560 11580 13595 15" 4036 6560 8067 13595 13595 2.2" 4036 5045 6560 11580 13595 3.3" 4036 5045 6560 11580 47 " 5045 6560 8067 13595 68 " 6560 8067 11580 13595 10 pF 8067 8067 11580 15 . 11580 11580 13595 22 . 11580 13595 13595 33 . 13595 13595 *AC voltage: f = 50 Hz; : L WwW H d a b c 1.4x Urms + UDC < Ur Size code +0.2/+ 0.3/+ 0.2 min. | min. | max. Dims in mm. 4036 | 10.2 9.1} 5.51 0.5 2.5 6 9 Solder pad 5045 |12.73 11.5} 6.5] 0.7 2.5 6 11.5 recommendation 6560 {16.54 15 7 0.7 2.5 6 15 8067 |20.7] 17 J11.2]} 0.9 4 9 18.5 : 11580 }29.2) 20 111.2] 09 4 12 27 Rights reserved to amend design data Bonding sit 13595 134.2124 |14.7109 4 12 32 without prior notification. Permissible AC voltages in relation to frequency at 10 C internal temperature rise (general guide):