https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page1/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC logic basic logic module, generation2, with16 I/Os, for plug-in connection to 8 digital or analog PLC-
INTERFACE terminal blocks, can be extended to 48I/Os, integrated realtime clock, micro USB socket,
accommodates memory block and Bluetooth adapter, push-in connection
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4055626218168
Weight per Piece (excluding packing) 140.000 g
Custom tariff number 85371098
Country of origin Germany
Technical data
Power supply
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 26.4 V DC
Typical input current at UN40 mA
Maximum input current at UN160 mA
Protective circuit Reverse polarity protection
Surge protection
Status display Green LED
Input data (digital)
Number of inputs 8 (2 configurable as analog)
Description of the input EN 61131-2, type 3
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page2/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Technical data
Input data (digital)
Input voltage 24 V DC
Signal level "0" signal < 5 V
Signal level "1" signal > 11 V
Input current "0" signal < 1 mA
Input current "1" signal typ. 2.5 mA
Status display Yellow LED
Input data (analog)
Number of inputs 2 (IN6 and IN7 are configurable as analog)
Input voltage range 0 V ... 10 V
Input resistance > 3.5 kΩ
Input data (PLC-INTERFACE)
Number of inputs ≤ 8
Description of the input technical data depends on the PLC-INTERFACE terminal block used
Input voltage 19 V DC
Typical current consumption 4 mA
Input resistance < 100 mΩ
Output data
Number of outputs ≤ 8
Nominal output voltage 24 V DC
Nominal current 9 mA
General
Realtime clock accuracy ±2 s/d
Realtime clock buffer time 96 h (Capacitor)
Color green
Mounting position any
Assembly instructions can be plugged onto 8 x PLC-INTERFACE terminal blocks
Operating mode 100% operating factor
Degree of protection IP20
Connection data (supply and digital inputs)
Connection method Push-in connection
Stripping length 9 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.25 mm² ... 0.5 mm² (Ferrule with plastic sleeve)
0.25 mm² ... 1.5 mm² (Ferrules without plastic sleeve)
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page3/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Technical data
Connection data (supply and digital inputs)
Conductor cross section AWG 26 ... 16
Number of connections 1
Number of positions 10
Note Device supply and 8 x inputs
Connection data (programming interface)
Connection method Micro USB type B
Number of connections 1
Connection data (INTERFACE system)
Connection method Spring-cage connection
Stripping length 6 mm
Conductor cross section solid 0.14 mm² ... 0.5 mm²
Conductor cross section flexible 0.2 mm² ... 0.5 mm²
Conductor cross section AWG 26 ... 20
Number of connections 1
Number of positions 3
Connection data (PLC V8C bus)
Connection method Insulation displacement connection
Number of connections 1
Number of positions 4
Connection data (memory)
Connection method S-PORT (socket)
Number of connections 1
Number of positions 12
Note For connecting the memory module
Ambient conditions
Ambient temperature (operation) -20 °C ... 50 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Max. permissible relative humidity (operation) 95 %
Dimensions
Width 50 mm
Height 111 mm
Depth 87 mm
Standards and Regulations
Designation Air clearances and creepage distances between the power circuits
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page4/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Technical data
Standards and Regulations
Standards/regulations DIN EN 50178
Rated insulation voltage 50 V
Rated surge voltage 0.8 kV
Insulation Basic insulation
Degree of pollution 2
Overvoltage category III
Conformance CE-compliant
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
106
111
40 66
87
PLC logic with relay
Dimensional drawing
106
111
40 66
79
PLC logic with analogue terminals
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page5/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Circuit diagram
BB A2A1
14 13
2966333 PLC-RSC-230UC/ 1AU/SEN
BB A2A1
14 13
2904690 PLC-OSC-24DC/48DC/100/V8C/SEN
24 V
0 V
230 V
N
PLC-V8C...
Basic circuit diagram: inputs via PLC-INTERFACE with the example of one
input terminal block with relay (230 V AC) and one input terminal block with
solid-state relay (24 V DC).
Circuit diagram
24 V
0 V
230 V
N
PLC-V8C...
14 1112
A1 A2 (-)
2966171 PLC-RSC- 24DC/21
BB 1314
A1 A2 (-)
2966676 PLC-OSC- 24DC/ 24DC/ 2/ACT
Basic circuit diagram: outputs via PLC-INTERFACE with the example of an
output terminal block with relay, 1 PDT, and an output terminal block with
solid-state relay.
Connection diagram
A1
A1
A1
A1
13
13
13
13
A2
A2
A2
A2
14
14
14
BB
BB
BB
BB
14
IO8
IO9
IO10
IO11
IO12
IO13
IO14
IO15
PLC-V8C/.../BM
24V
0V
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
24V
0V
24V
0V
Contactingfor
Extensionmodule
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page6/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Circuit diagram
13
BB
14
13
BB
14
13
BB
14
24V
0V
I/U
Us
GND
4-
wire
2
3
4
1
µC
2
3
4
1
µC
I/U
passive
GND
A2
BB
A1
A2
BB
A1
A2
BB
A1
Internal Logic
DI DI DI AI
IO8 IO9 IO10 IO14IO11 IO12 IO13 IO15
24V
0V
IN 7IN 6
IN 5IN 4
IN 3IN 2IN 1
IN 00 V24 V
DI
AI
DI
AI
DO DO DO AO
24V
1
2
3
4
1 Field connection via COMBICON connector
2 PLC –V8C/
3 PLC-INTERFACE terminal blocks
4 Field connection via PLC-INTERFACE terminal blocks
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page7/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Circuit diagram
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
Internal Logic
DI
AI
DI
AI
24 V 0 V IN 0 IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7
IO8 IO9 IO10 IO11 IO12 IO13 IO14 IO15
24V
PLC-INTERFACE
Memory
USB
PLC-V8C/.../EM
T-BUS
Classifications
eCl@ss
eCl@ss 4.0 27242216
eCl@ss 4.1 27242216
eCl@ss 5.0 27242216
eCl@ss 5.1 27242216
eCl@ss 6.0 27242216
eCl@ss 7.0 27242216
eCl@ss 8.0 27242216
eCl@ss 9.0 27242216
ETIM
ETIM 2.0 EC001417
ETIM 3.0 EC001417
ETIM 4.0 EC001417
ETIM 5.0 EC001417
ETIM 6.0 EC001417
UNSPSC
UNSPSC 13.2 39122329
Approvals
Approvals
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page8/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Approvals
Approvals
UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
Approval details
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140
EAC RU C-
DE.A*30.B.01082
cULus Listed
Accessories
Accessories
Adapter cable
Connecting cable-PLC-V8C/CAB/TBUS/0,3M-2905263
Round cable set; controller: PLC logic (connection to the DIN rail connector); connection 1: COMBICON connectors (1x
3-position); connection 2: COMBICON connectors (1x 5-position); cable length: 0.3 m
DIN rail connector
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page9/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
DIN rail bus connectors-ME 22,5 TBUS 1,5/ 5-ST-3,81 GN-2707437
DIN rail connector, nominal current: 8 A, nominal current (Ex): 8 A, nominal voltage (Ex): 125 V, number of positions: 5,
pitch: 3.81 mm, Articles with gold-plated contacts, bus connectors for connecting with electronic housings
Extension module
Extension module-PLC-V8C/PT-24DC/EM-2905137
PLC logic extension logic module with 16I/Os for plug-in connection to 8PLC-INTERFACE terminal blocks for extending
the basic module (a maximum of two extension modules can be connected to a basic module), push-in connection
Extension module-PLC-ASC-UI-IN-2906916
Analog input module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, screw connection
Extension module-PLC-APT-UI-IN-2906917
Analog input module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, Push-in connection
Extension module-PLC-ASC-PT100-IN-2906918
Pt 100/Pt1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt
100, Pt 1000) can be configured via DIP switch, screw connection
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page10/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Extension module-PLC-APT-PT100-IN-2906919
Pt 100/Pt1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt
100, Pt 1000) can be configured via DIP switch, Push-in connection
Extension module-PLC-ASC-UI-OUT-2906920
Analog output module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, screw connection
Extension module-PLC-APT-UI-OUT-2906921
Analog output module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, Push-in connection
Gateways/Proxies
Data interface-EM-PB-GATEWAY-IFS-2297620
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via PROFIBUS DP. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Data interface-EM-RS232-GATEWAY-IFS-2901526
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via Modbus/RS-232. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page11/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Data interface-EM-RS485-GATEWAY-IFS-2901527
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via Modbus/RS-485. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Data interface-EM-MODBUS-GATEWAY-IFS-2901528
Gateway for the connection of up to 32 INTERFACE system devices via Modbus/TCP to a higher-level controller. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Data interface-EM-DNET-GATEWAY-IFS-2901529
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via DeviceNet™. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Data interface-EM-CAN-GATEWAY-IFS-2901504
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via CANopen®. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Data interface-EM-PNET-GATEWAY-IFS-2904472
Gateway for the connection of up to 32 INTERFACE system devices via PROFINET to a higher-level controller. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page12/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Data interface-EM-ETH-GATEWAY-IFS-2901988
Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via EtherNet/IP™. The
INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.
Labeled terminal marker
Zack Marker strip, flat-ZBF 19,7 CUS-0825021
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 19.7 mm, lettering field size: 5.15 x 19.7 mm
Memory block
Memory block-IFS-CONFSTICK-2986122
Multi-functional memory block for the INTERFACE systemf for easy storage and backup of the configuration.
Programming adapter
Adapter-IFS-BT-PROG-ADAPTER-2905872
Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINIAnalog,
MINIAnalogPro, MACXAnalog, INTERFACE systemgateways, and PLC logic device series.
Programming cable
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page13/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Connecting cable-CAB-USB A/MICRO USB B/2,0M-2701626
Connecting cable, for connecting the controller to a PC for PC Worx and LOGIC+, USB A to micro USB B, 2 m in length.
Relay Module
Relay Module-PLC-RPT- 24DC/21-2900299
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay
with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 24 V DC
Relay Module-PLC-RPT- 24DC/21AU-2900306
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature relay
with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC
Relay Module-PLC-RPT- 24DC/ 1/ACT-2900312
PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with push-in connection and
plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
Switch-PLC-RPT- 24UC/ 1/S/H-2900328
PLC-INTERFACE with switch (operation by hand) and integrated power contact relay for the "Manual, Zero and
Automatic" functions, with push-in connection, for mounting on DIN rail NS 35/7.5, one N/O contact, input voltage 24 V
AC/DC
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page14/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Relay Module-PLC-RSC- 24DC/21-2966171
PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with
power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
Relay Module-PLC-RSC- 24DC/21AU-2966265
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay
with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC
Switch-PLC-RSC- 24UC/ 1/S/H-2982236
PLC-INTERFACE with switch (operation by hand) for the “Manual, Zero, and Automatic” functions, with screw connection
and integrated power contact relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V AC/DC
Relay Module-PLC-RPT- 24DC/ 1AU/SEN-2900313
PLC-INTERFACE for input functions, consisting of PLC-BPT.../SEN basic terminal block with push-in connection and
plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V
DC
Relay Module-PLC-RPT-120UC/ 1AU/SEN-2900314
PLC-INTERFACE for input functions, consisting of PLC-BPT.../SEN basic terminal block with push-in connection and
plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 120
V AC/110 V DC
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page15/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Relay Module-PLC-RPT-230UC/ 1AU/SEN-2900315
PLC-INTERFACE for input functions, consisting of PLC-BPT.../SEN basic terminal block with push-in connection and
plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 230
V AC/220 V DC
Relay Module-PLC-RSC- 24DC/ 1AU/SEN-2966317
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-
in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
Relay Module-PLC-RSC-120UC/ 1AU/SEN-2966320
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-
in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 120 V
AC/110 V DC
Relay Module-PLC-RSC-230UC/ 1AU/SEN-2966333
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-
in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 230 V
AC/220 V DC
Relay socket
Relay base-PLC-BSC- 5DC/ 1/SEN-2980267
6.2 mm PLC basic terminal block for output functions with screw connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 5 V DC
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page16/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Relay base-PLC-BPT- 24DC/21-2900445
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS
35/7,5, 1 PDT, input voltage 24 V DC
Relay base-PLC-BPT- 24DC/ 1/SEN-2900262
6.2 mm PLC basic terminal block for input functions with push-in connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage 24 V DC
Relay base-PLC-BSC- 24DC/21-2966016
6.2 mm PLC basic terminal block with screw connection, without relays or solid-state relay, for mounting on DIN rail NS
35/7,5, 1 PDT, input voltage 24 V DC
Relay base-PLC-BSC- 24DC/ 1/SEN-2966061
6.2 mm PLC basic terminal block for input functions with screw connection, without relay or solid-state relay, for mounting
on DIN rail NS 35/7,5, with sensor supply voltage distribution (BB), 1 N/O contact, input voltage 24 V DC
Screwdriver tools
Screwdriver-SZS 0,4X2,5 VDE-1205037
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page17/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Solid-state relay module
Solid-state relay module-PLC-OPT- 24DC/ 48DC/100-2900352
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OPT- 24DC/ 24DC/2-2900364
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/3 A
Solid-state relay module-PLC-OPT- 24DC/230AC/1-2900369
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/0.75 A
Solid-state relay module-PLC-OPT- 24DC/ 24DC/2/ACT-2900376
PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with push-in connection and
plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V
DC/3 A
Solid-state relay module-PLC-OPT- 24DC/300DC/1-2900383
PLC-INTERFACE, integrated solid-state relay, with push-in connection, for mounting on NS 35/7,5 DIN rails, input: 24 V
DC, output: 12 - 300 V DC/1 A
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page18/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Solid-state relay module-PLC-OPT- 24DC/ 24DC/10/R-2900398
PLC-INTERFACE with confirmation contact, consisting of basic terminal block with push-in connection and integrated
miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/10 A
Solid-state relay module-PLC-OPT- 24DC/ 48DC/500/W-2900378
PLC-INTERFACE with electronic PDT contact, consisting of PLC-BPT.../21 basic terminal block with push-in connection
and integrated miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input: 24 V DC, output: 3 - 48 V
DC/500 mA
Solid-state relay module-PLC-OPT- 24DC/TTL-2900363
PLC-INTERFACE for TTL signal, consisting of PLC-O.../TTL basic terminal block with push-in connection and integrated
solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: TTL (5 V DC)
Solid-state relay module-PLC-OSC- 24DC/ 48DC/100-2966728
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OSC- 24DC/ 24DC/ 2-2966634
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/3 A
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page19/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Solid-state relay module-PLC-OSC- 24DC/230AC/ 1-2967840
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature solid-
state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/0.75 A
Solid-state relay module-PLC-OSC- 24DC/ 24DC/ 2/ACT-2966676
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and
plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V
DC/3 A
Solid-state relay module-PLC-OSC- 24DC/230AC/ 1/ACT-2967947
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and
plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 24 ... 253 V
AC/0.75 A
Solid-state relay module-PLC-OSC- 24DC/300DC/ 1-2980678
PLC-INTERFACE, integrated solid-state relay, with screw connection, for mounting on NS 35/7,5 DIN rails, input: 24 V
DC, output: 12 - 300 V DC/1 A
Solid-state relay module-PLC-OSC- 24DC/ 24DC/ 10/R-2982702
PLC solid state relay with screw connection and short-circuit-proof DC voltage output, input: 24 V DC, output: 3-33 V
DC/10 A
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page20/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Solid-state relay module-PLC-OSC- 24DC/ 48DC/500/W-2980636
PLC electronic PDT, integrated optocoupler, with screw connection, for mounting on DIN rail NS 35/7.5, input: 24 V DC,
output: 3 - 48 V DC/500 mA
Solid-state relay module-PLC-OSC- 24DC/TTL-2982728
PLC solid-state relay with screw connection, for mounting on DIN rail NS 35/7.5, input: 24 V DC, output: TTL (5 V DC)
Solid-state relay module-PLC-OPT-24DC/48DC/100/V8C/SEN-2904693
PLC-INTERFACE for input functions with PLC logic, with push-in connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OPT-120UC/48DC/100/V8C/SEN-2904694
PLC-INTERFACE for input functions with PLC logic, with push-in connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 120 V AC/110 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OPT-230UC/48DC/100/V8C/SEN-2904695
PLC-INTERFACE for input functions with PLC logic, with push-in connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 230 V AC/220 V DC, output: 3 - 48 V DC/100 mA
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page21/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Solid-state relay module-PLC-OSC- 24DC/48DC/100/V8C/SEN-2904690
PLC-INTERFACE for input functions with PLC logic, with screw connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OSC-120UC/48DC/100/V8C/SEN-2904691
PLC-INTERFACE for input functions with PLC logic, with screw connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 120 V AC/110 V DC, output: 3 - 48 V DC/100 mA
Solid-state relay module-PLC-OSC-230UC/48DC/100/V8C/SEN-2904692
PLC-INTERFACE for input functions with PLC logic, with screw connection and plug-in miniature solid-state relay, for
mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 230 V AC/220 V DC, output: 3 - 48 V DC/100 mA
Terminal marking
Zack marker strips off the roll, flat-ZBF 19,7:UNBEDRUCKT-0810627
Zack marker strips off the roll, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK,
mounting type: snap into flat marker groove, for terminal block width: 19.7 mm, lettering field size: 19.7 x 5.2 mm
Necessary add-on products
Extension module-PLC-ASC-UI-IN-2906916
Analog input module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, screw connection
https://www.phoenixcontact.com/us/products/2907446
07/03/2018Page22/23
Controller-PLC-V8C/PT-24DC/BM2-2907446
Accessories
Extension module-PLC-APT-UI-IN-2906917
Analog input module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, Push-in connection
Extension module-PLC-ASC-PT100-IN-2906918
Pt 100/Pt1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt
100, Pt 1000) can be configured via DIP switch, screw connection
Extension module-PLC-APT-PT100-IN-2906919
Pt 100/Pt1000 temperature transducer for PLC logic logic modules (Generation 2 only), single-channel, signal type (Pt
100, Pt 1000) can be configured via DIP switch, Push-in connection
Extension module-PLC-ASC-UI-OUT-2906920
Analog output module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, screw connection
Extension module-PLC-APT-UI-OUT-2906921
Analog output module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4...20mA,
0...20mA, 0...10V, 2...10V) can be configured via DIP switch, Push-in connection
