Power Dividers Three Way Isolated True Three Way Power Division Full 2.0 - 18.0 GHz bandwidth units Low VSWR - High Isolation Rugged Stripline Construction Meets Mil-E-5400 and Mil-E16400 Environment Midwest Microwave's series of high performance isolatedThree Way Power Dividers are true three way dividers. They are small, lightweight, ruggedly constructed stripline units that possess inherently low insertion loss and VSWR with high isolation and excellent phase and amplitude tracking. Units are available in ultra-wideband frequency bandwidths covering the entire range of 2.0 - 18.0 GHz. The units meet the environmental specifications of MIL-E-5400 and MIL-E-16400. CASE STYLE 1 CASE STYLE 2 ELECTRICAL SPECIFICATIONS FREQUENCY RANGE CASE (GHz ) STYLE MODEL NUMBER AMPLITUDE BALANCE (dB) PHASE BALANCE (degrees) INSERTION LOSS (dB) max ISOLATION (dB) min VSWR max INPUT POWER max(W) 0.5-2.0 1 PWD-5520-03-SMA-79 0.5 5 1.0 15 1.50 5 2.0-18.0 2 PWD-5532-03-SMA-79 0.5 5 1.0 20 1.50 10 2.0-18.0 1 PWD-5533-03-SMA-79 0.5 10 1.2 15 1.80 10 MECHANICAL SPECIFICATIONS - Note: 104 INCHES (mm) C ASE STYLE A B C D E WEIGH T Oz Gr 1 3.00 (76.2) 0.63 (16.0) 0.250 (6.35) 1.50 (38.1) 0.080 (2.0) 3.15 89 2 2.50 (63.5) 1.25 (31.8) 0.375 (9.5) 0.75 (19.0) 0.080 (2.0) 1.80 51 1. Specifications assume that all of the outputs are terminated with a load that has a VSWR not greater than 2.0:1. 2. TNC or NType output connectors are available by substituting "TNC" or "NNN" for "SMA" in the Model Number.