39
0.406
(10.31
0.015
0.38)
+
-
+
-
0.250
(6.35)
0.250
(6.35)
0.125
(3.16)
0.020 (0.51) Thk x 0.187 (4.75) Wide
Q.C. Terminal
0.797
(20.24
0.010
0.25)
+
-
+
-
0.625
(15.88
0.015
0.38)
+
-
+
-
0.406
(10.31)
1.093
(27.76
0.015
0.38)
+
-
+
-
0.875 (22.23)
0.343
(8.71
0.015
0.38)
+
-
+
-
0.550
(13.97
0.015
0.38)
+
-
+
-
0.113 (2.87)
0.116 (2.95) Dia.
0.234
(5.94)
0.087
(2.21)
0.109
(2.77)
0.106 (2.69) Reference Line
0.397
(10.08
0.015
0.38)
+
-
+
-
0.112 (2.85)
0.116 (2.95) x 0.126 (3.20)
0.109 (2.77)
0.291 (7.39)
COM
N.C.
N.O.
0.050
(1.27)
Dia.
0.207
(5.27
0.015
0.38)
+
-
+
-
0.109
(2.77)
0.750
(19.05)
Max.
Rest
1.382
(35.10
0.031
0.79)
+
-
+
-
0.600
(15.24
0.045
1.14)
+
-
+
-
Operating Position
Actuation
Line
0.960
(24.38)
Max.
Rest
1.289
(32.74
0.031
0.79)
+
-
+
-
0.786
(19.96
0.045
1.14)
+
-
+
-
Operating Position
Actuation
Line
COM
COM
N.C.
N.O.
N.C.
N.O.
Specifications subject to change without notice.
Dimensions — Light Force inches (mm)
Part Number Suffix –50NX
Part Number Suffix –90NX
Mounting — Light Force
Recommended mounting screw size:
#4-40 round head. Recommended torque
on screw: 3 inch lbs. max.
Ordering Information
Select the current rating you need.
Combine the corresponding Series/Prefix
number with the appropriate suffix number
for the switch type, circuitry and terminals
you require.
Circuitry — Light Force
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
N.C.
N.O.
N.C.
N.O.
N.C.
N.O.
N.C.
N.O.
0.234 (5.94)
0.234 (5.94)
0.234 (5.94)
0.234 (5.94)
0.187 (4.75)
0.250 (6.35)
0.099 (2.51)
Dia. Hole
Screw
Terminals
Q.C.
Solder
Short Solder
0.240 (6.10)
Terminals — Light Force
Choice of screw, solder or two quick
connect terminals.
Note: 0.187″Quick Connect terminals are
standard. Normally, to order screw terminals
add 10 to suffix number. To order solder
terminals add 20 to suffix number and to
order 0.250″Q.C. terminals add 40 to
suffix number.
Exception: When ordering –55HX, –75HX,
–75KX or –85HX switches with screw, solder
or 0.250
″
terminals, consult factory.
Terminal SPDT SPST NO SPST NC
QC 0.187″–00AX –01AX –02AX
Screw –10AX –11AX –12AX
Solder –20AX –21AX –22AX
Short Solder –30AX –31AX –32AX
QC 0.250″–40AX –41AX –42AX
*E35 and E36 only available with 0.250″(6.35) terminals.
Switch
Mounting
Hole
Actuation Length
0.177 (4.50)
0.355 (9.02)
Standard
Ratio
High
Ratio
Actuators — Light Force
Many special forms and lengths of actuators
are available. Standard type integral hinged
lever and roller actuators are available in
choice of 2 mounting positions. Actuation
lengths are dimensioned from centerline of
switch mounting hole as shown.
Actuator Specifications — Light Force Maximum
Max. Operating Force (gms.) Maximum Operating Minimum Movement Actuation
Pre-Travel Point*Over-Travel Differential Length**
Actuator Switch E21, E23, inches inches inches inches inches
Type Type E22 E31 E33 E34 E35 E36 (mm) (mm) (mm) (mm) (mm)
–00AX 15 45 75 100 ——0.047 0.578±0.020 0.050 0.010 —
(1.19) (14.68±0.51) (1.27) (0.25) —
–00HX 15 45 75 100 ——0.062 0.600±0.020 0.050 0.016 0.865
(1.57) (15.24±0.51) (1.27) (0.41) (21.97)
–50HX 8 22 37 50 ——0.125 0.600±0.045 0.085 0.030 1.400
(3.18) (15.24±1.14) (2.16) (0.76) (35.56)
–75HX 5 14 22 30 ——0.220 0.600±0.075 0.130 0.040 1.580
(5.59) (15.24±1.91) (3.30) (1.02) (40.13)
–50KX 8 22 37 50 ——0.125 0.806±0.045 0.085 0.030 1.340
(3.18) (20.47±1.14) (2.16) (0.76) (34.04)
–75KX 5 14 22 30 ——0.200 0.806±0.075 0.120 0.040 1.516
(5.08) (20.47±1.91) (3.05) (1.02) (38.51)
–55HX 4 10 17 22 ——0.300 0.600±0.100 0.187 0.065 2.757
(7.62) (15.24±2.54) (4.75) (1.65) (70.03)
–85HX 2610 13 ——0.500 0.600±0.175 0.312 0.100 2.932
(12.70) (15.24±4.45) (7.92) (2.54) (74.47)
–50NX†8 22 37 50 65 112 0.175 0.600±0.045 0.065 0.030 1.382
(4.45) (15.24±1.14) (1.65) (0.76) (35.10)
–90NX†8 22 37 50 65 112 0.125 0.793±0.058 0.085 0.030 1.289
(3.18) (20.14±1.47) (2.16) (0.76) (32.74)
–40AX ——— —120 220 0.070 0.557±0.020 0.035 0.010 —
(1.78) (14.15±0.51) (0.89) (0.25) —
*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).
†Only available with 85°C temperature rating.
Note: Suffix numbers shown represent switch with 0.187″(4.75mm) terminals.