Ordering information DC-DC Converters PCB Mount Type SUTW3 SUT W 3 12 12 -O 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Optional G :Capacitor between Input and Output is removed. R SU.SUC/SUT MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUTW30512 3.12 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.13 SUTW30515 3 t15 or +30 0.1 SUTW31212 3.12 t12 or +24 0.13 SUTW31215 3 t15 or +30 0.1 SUTW32412 3.12 t12 or +24 0.13 SUTW32415 3 t15 or +30 0.1 SUTW34812 3.12 t12 or +24 0.13 SUTW34815 3 t15 or +30 0.1 SUTW31215 SUTW32412 DC18 - 36 0.329typ 0.172typ 76typ 76typ t15(+30) t12(+24) SUTW32415 SUTW34812 DC36 - 76 0.165typ 0.086typ 76typ 76typ t15(+30) t12(+24) SUTW34815 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC/SUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 * MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) OVERCURRENT PROTECTION REMOTE ON/OFF INPUT-OUTPUT INPUT-CASE OUTPUT-CASE OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SUTW30512 DC4.5 - 9 0.844typ 74typ t12(+24) SUTW30515 SUTW31212 DC9 - 18 0.811typ 0.343typ 74typ 76typ t15(+30) t12(+24) 0.13 0.1 0.13 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.13 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.13 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.083typ 76typ t15(+30) by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL, EN60950-1 30.0X23.4 X9.15mm [1.18X0.92X0.36 inches] (WXHXD) / 8g max Convection/Forced air Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. SU.SUC/SUT-40 SUC/SUT-40 SU_E.indd 40 15.6.24 4:22:40 PM SUTW3 External view Model 6.85 17.78 0.2 [0.7] +Vout +Vin 5.08 0.2 [0.2] 1 6.85 [0.24] [0.27] [0.06] COM TRM Unit : 0.1inch Dimensions in mm, [ SU.SUC/SUT ]= inches Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal thickness : 0.30.1 [0.012] Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 8g max -Vout 6.01 2.54 0.2 6.01 [0.24] 4-f1.6 Outline [0.04] 6.01 8.35 RC [0.04] [0.27] 23.4 [0.04] 3.5 0.25 [0.02] 7-f0.9 Part B [0.14] 1 [0.33] 0.5 6.01 [0.24] [0.02] Part A 0.6 0.1 -Vin [0.92] Recommended Pad and Hole dia. (TOP VIEW) [0.24] [0.1] 30 [1.18] SU.SUC/SUT Back View Closeup of part A Closeup of part B 6.01 6.85 [0.24] [0.27] : Conduction Area .SUC/SUT-41 SU.SUC/SUT-41 SU SU_E.indd 41 15.6.24 4:22:40 PM Ordering information DC-DC Converters PCB Mount Type SUTW6 SUT W 6 12 12 -O 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Optional G :Capacitor between Input and Output is removed. R SU.SUC/SUT MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUTW60512 6 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.25 SUTW60515 6 t15 or +30 0.2 SUTW61212 6 t12 or +24 0.25 SUTW61215 6 t15 or +30 0.2 SUTW62412 6 t12 or +24 0.25 SUTW62415 6 t15 or +30 0.2 SUTW64812 6 t12 or +24 0.25 SUTW64815 6 t15 or +30 0.2 SUTW61215 SUTW62412 DC18 - 36 0.588typ 0.291typ 85typ 86typ t15(+30) t12(+24) SUTW62415 SUTW64812 DC36 - 76 0.291typ 0.145typ 86typ 86typ t15(+30) t12(+24) SUTW64815 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC/SUT OUTPUT MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) SUTW60512 DC4.5 - 9 1.538typ 78typ t12(+24) SUTW60515 SUTW61212 DC9 - 18 1.538typ 0.588typ 78typ 85typ t15(+30) t12(+24) 0.25 0.2 0.25 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.25 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.25 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.145typ 86typ t15(+30) by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND REMOTE ON/OFF Provided (Negative logic L : ON, H : OFF) OTHERS INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) ISOLATION INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 37.6X26.4X9.15mm [1.84X1.04X0.36 inches] (WXHXD) / 11g max OTHERS Convection/Forced air COOLING METHOD *1 *2 *3 *4 * Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. SU.SUC/SUT-42 SUC/SUT-42 SU_E.indd 42 15.6.24 4:22:41 PM SUTW6 External view Model Recommended Pad and Hole dia. (TOP VIEW) [0.04] 17.78 0.2 [0.7] +Vout 6.85 1.9 [0.39] [0.27] [0.07] COM TRM 8.35 +Vin 5.08 -Vout [0.36] 9.81 0.2 [0.2] 2.54 0.2 [0.06] Unit : 0.1inch Dimensions in mm, [ ]= inches SU.SUC/SUT [0.04] 9.81 [0.33] RC 9.81 [0.39] 4-f1.6 1 9.15 -Vin [0.04] [0.27] [1.04] 6.85 [0.02] 1 3.5 0.6 0.1 7-f0.9 Outline Part B [0.14] Part A 0.25 [0.02] 0.5 26.4 9.81 [0.39] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal thickness : 0.30.1 [0.012] Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 11g max [0.39] [0.1] 37.6 [1.48] SU.SUC/SUT Back View Closeup of part A 9.81 [0.39] Closeup of part B 6.85 [0.27] : Conduction Area .SUC/SUT-43 SU.SUC/SUT-43 SU SU_E.indd 43 15.6.24 4:22:42 PM Ordering information DC-DC Converters PCB Mount Type SUTW10 SUT W 10 12 12 -O 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Optional G :Capacitor between Input and Output is removed. R SU.SUC/SUT MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUTW100512 10.8 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.45 SUTW100515 10.5 t15 or +30 0.35 SUTW101212 10.8 t12 or +24 0.45 SUTW101215 10.5 t15 or +30 0.35 SUTW102412 10.8 t12 or +24 0.45 SUTW102415 10.5 t15 or +30 0.35 SUTW104812 10.8 t12 or +24 0.45 SUTW104815 10.5 t15 or +30 0.35 SUTW101215 SUTW102412 DC18 - 36 1.02typ 0.523typ 86typ 86typ t15(+30) t12(+24) SUTW102415 SUTW104812 DC36 - 76 0.509typ 0.262typ 86typ 86typ t15(+30) t12(+24) SUTW104815 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC/SUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 * MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) OVERCURRENT PROTECTION REMOTE ON/OFF INPUT-OUTPUT INPUT-CASE OUTPUT-CASE OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SUTW100512 DC4.5 - 9 2.51typ 86typ t12(+24) SUTW100515 SUTW101212 DC9 - 18 2.44typ 1.05typ 86typ 86typ t15(+30) t12(+24) 0.45 0.35 0.45 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.45 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.45 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.254typ 86typ t15(+30) by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL, EN60950-1 45.2X29.3 X9.15mm [1.78X1.15X0.36 inches] (WXHXD) / 14g max Convection/Forced air Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. SU.SUC/SUT-44 SUC/SUT-44 SU_E.indd 44 15.6.24 4:22:42 PM SUTW10 External view Model Recommended Pad and Hole dia. (TOP VIEW) 13.61 17.78 0.25 3.5 0.2 [0.7] [0.14] 1 [0.04] 0.6 0.1 [0.02] 6.85 Part B 1 [0.04] 13.61 6.85 1.9 [0.54] [0.27] [0.07] 9.15 +Vout +Vin COM TRM -Vout 5.08 [0.2] 0.2 [0.36] [0.33] RC 8.35 -Vin [0.04] 13.61 [0.54] 4-f1.6 [0.06] Outline Part A 7-f0.9 [0.27] 29.3 [0.02] 0.5 [1.15] [0.54] Unit : 0.1inch Dimensions in mm, [ ]= inches SU.SUC/SUT Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal thickness : 0.30.1 [0.012] Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 14g max 13.61 2.54 0.2 [0.54] [0.1] 45.2 [1.78] Back View Closeup of part A Closeup of part B SU.SUC/SUT 13.61 [0.54] 6.85 [0.27] : Conduction Area .SUC/SUT-45 SU.SUC/SUT-45 SU SU_E.indd 45 15.6.24 4:22:43 PM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: SUTW31215 SUTW61215 SUTW62415 SUTW101215 SUTW102415 SUTW104815 SUTW34815 SUTW60512 SUTW102415-G SUTW104812 SUTW102412 SUTW32412-G SUTW30515 SUTW34812 SUTW62412 SUTW31212 SUTW61212 SUTW64812 SUTW64815 SUTW62415-G SUTW100512 SUTW30512 SUTW60515 SUTW100515 SUTW102412-G SUTW62412-G SUTW32415 SUTW32415-G SUTW32412 SUTW101212