Data Sheet No. PD 60068-I IRSF3021 (NOTE: For new designs, we recommend IR's new products IPS021 and IPS021L) FULLY PROTECTED POWER MOSFET SWITCH Features * * * * * * * * Product Summary Controlled slew rate reduces EMI Over temperature protection with auto-restart Linear current-limit protection Active drain-to-source clamp ESD protection Lead compatible with standard Power MOSFET Low operating input current Monolithic construction Vds(clamp) Rds(on) Ilim Description The IRSF3021 Lamp and DC motor driver is a fully protected three terminal monolithic Smart Power MOSFET that features current limiting, over-temperature protection, ESD protection and over-voltage protection. The on-chip protection circuit limits the drain current at 5.5A (typical) in the on-state, when the load is short circuited. The over-temperature circuitry turns off the Power MOSFET when the junction temperature exceeds 165C (typical). The device restarts automatically once it has cooled down below the reset temperature. The IRSF3021 is specifically designed for driving loads that require overload protection and in-rush current control while operating in automotive and industrial environments. Targeted applications include resistive loads such as lamps or capacitive loads such as airbag squibs and DC motor drives. 50V 200m 5.5A Tj(sd) 165 oC EAS 200mJ Applications * * * * Cabin Lighting Airbag System Programmable Logic Controller DC Motor Drive Packages 3 Lead TO220AB 3 Lead SOT223 Block Diagram DRAIN Drain Input INPUT Source SOURCE www.irf.com 1 IRSF3021 Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. (TC = 25oC unless otherwise specified.) Symbol Parameter Min. Max. Units -- 50 V -0.3 10 Continuous drain current -- self limited A Power dissipation -- 30 W Tc -- 3 W Tc Vds, max Continuous drain to source voltage Vin, max Continuous input voltage Ids Pd EAS Unclamped single pulse inductive energyA -- 200 mJ Vesd1 Vesd2 Electrostatic discharge voltage (Human Body Model) -- 4000 V Electrostatic discharge voltage (Machine Model) -- 1000 T Jop Operating junction temperature range -55 150 TStg Storage temperature range -55 150 TL Lead temperature (soldering, 10 seconds) -- 300 Test Conditions 25oC, TO220 25oC, SOT223 100pF, 1.5k 200pF, 0 o C Static Electrical Characteristics (TC = 25oC unless otherwise specified.) Symbol Parameter V ds,clamp Drain to source clamp voltage R ds(on) Drain to source on resistance Idss Drain to source leakage current Vth Input threshold voltage I i,on Input supply current (Normal Operation) I i,off Input supply current (Protection Mode) Vin, clamp Input clamp voltage Body-drain diode forward drop Vsd Min. Typ. 50 -- -- 1.0 -- -- 9 -- 56 155 -- 2.0 100 250 10 1.5 Min. Typ. -- -- -- -- -- -- -- -- Max. Units Test Conditions 65 200 250 3.0 300 500 -- -- V m A V A A V Ids = 6A, tp = 700 S Vin = 5V, Ids = 2A Vds = 40V, Vin = 0V Vds= Vin, Ids+ Iin = 10mA Vin = 5V Vin = 5V Iin = 1mA Ids = -2A, Rin = 1k Thermal Characteristics Symbol Parameter R thjc R thja R thjc R thja Junction to case Junction to ambient Junction to case Junction to PCB Max. Units Test Conditions 4 60 40 60 o o C/W TO-220AB C/W SOT-223 NOTES: When mounted on a 1" square PCB (FR-4 or G10 material). For recommended footprint and soldering techniques, refer to International Rectifier Application Note AN-994. EAS is tested with a constant current source of 6A applied for 700S with Vin = 0V and starting Tj = 25oC. Input current must be limited to less than 5mA with a 1k resistor in series with the input when the Body-Drain Diode is forward biased. 2 www.irf.com IRSF3021 Switching ElectricalCharacteristics (VCC = 14V, resistive load (RL ) = 10, Rin= 100. Specifications measured at TC= 25o C unless otherwise specified.) Symbol Parameter t don tr t doff tf SR SR Turn-on delay time Rise Time Turn-off delay time Fall time Output positive slew rate Output negative slew rate Min. Typ. -- -- -- -- -4 -4 10 30 20 15 -- -- Max. Units Test Conditions 50 80 60 50 4 4 s V/s Vin = 0V to 5V, 50% to 90% Vin = 0V to 5V, 90% to 10% Vin = 5V to 0V, 50% to 10% Vin = 5V to 0V, 10% to 90% Vin = 0V to 5V, +dVds/dt Vin = 5V to 0V, -dVds/dt Protection Characteristics (TC= 25oC unless otherwise specified. Symbol Parameter Min. Typ. Ids(lim) T j(sd) V protect t Iresp I peak t Tresp 3.0 155 -- -- -- -- Current limit Over temperature shutdown threshold Min. input voltage for over-temp function Current limit response time Peak short circuit current Over-temperature response time 5.5 165 3 TBD 10 TBD Max. Units Test Conditions 8.0 -- -- -- -- -- A C V s A s o Vin = 5V, Vds = 14V Vin = 5V, Ids = 2A Lead Assignments 2 (D) (2) D 1 In 2 D 3 S 1 2 3 In D S 3 Lead - SOT223 3 Lead - TO220 IRSF3021L IRSF3021 Part Number www.irf.com 3 IRSF3021 Case Outline - SOT-223 (TO-261AA) 01-0022 05 4 www.irf.com IRSF3021 Case Outline 3 Lead - TO220 2 NOTES: 2X IRGB 01-3026 01 Tape & Reel - SOT223 01-0028 05 / 01-0008 02 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 IR EUROPEAN REGIONAL CENTRE: 439/445 Godstone Rd, Whyteleafe, Surrey CR3 0BL, United Kingdom Tel: ++44 (0) 20 8645 8000 IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171-0021 Tel: 81 (0) 33 983 0086 IR HONG KONG: Unit 308, #F, New East Ocean Centre, No. 9 Science Museum Road, Tsimshatsui East, Kowloon, Hong Kong Tel: (852) 2803-7380 Data and specifications subject to change without notice. 4/11/2000 www.irf.com 5 Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/