Precision Tools
for Motorsports
Precision Tools
for Motorsports
starrett.com
starrett.com
WHAT’S THE TRUE MEASURE OF PERFORMANCE RACING?
WHAT’S THE TRUE MEASURE OF PERFORMANCE TOOLS?
WANT TO WIN, RACE AFTER RACE?
COUNT ON STARRETT PRECISION,
MEASUREMENT AFTER MEASUREMENT.
Precision Tools for Motorsports
Precision Tools for Motorsports 1
1
Specications subject to change
Starrett helps Joe Gibbs Racing improve
chassis twisting measurement.
Joe Gibbs Racing supercharged their chassis twist
rig with a DataSure® Wireless System and Wireless
indicators. Now data collection is automated, with
eight critical measurements digitally transmitted to a
PC spreadsheet. Accuracy and reliability increase,
while time and labor decrease.
Starrett provides ride height measurement
for Porsche Motorsport Racing.
Controlling the height of a car is one of the most
strict rules in racing. Starrett developed a custom-
engineered Ride Height Gage that provides easier,
more precise measurement before and after the
race. Porsche Motorsports now has better accuracy,
repeatability and traceability of this key parameter.
Table of Contents
Micrometers 2
Slide Calipers 4
Tool Sets 5
Height & Depth Gages 6
Testers 7
Gage Blocks 7
Indicators & Gages 8
Bore Gages 11
Squares 12
Rules, Straight Edges & Parallels 12
Protractors & Angle Measurement 13
Levels 13
Hole Gages 14
Fixed Gage Standards 15
Shop Tools 16
Vision & Optical 19
DataSure 19
Saws 20
Workshop 21
starrett.com
starrett.com
2
2
Electronic Outside Micrometers
• 796 Series has IP67 level of protection
against coolant, water, dirt and dust
• Balanced, tapered frame and hard,
stable one piece spindle
• Zero tool at any position – retain and return to true zero
• Large, easy-to-read LCD readout
• Micro-lapped carbide measuring faces
• All models without output
796XFL-1 67828 0-1"
(0-25mm)
.00005"
(.001mm)
796XRL-1 69089 0-1"
(0-25mm)
.00005"
(.001mm)
796MXFL-25 69084 0-25mm
Metric Model
.001mm
(.00005")
3732XFL-1 12268 0-1"
(0-25mm)
.00005"
(.001mm)
3732XFL-2 12269 1-2"
(25-50mm)
.00005"
(.001mm)
3732XFL-3 12270 2-3"
(50-75mm)
.00005"
(.001mm)
3732XFL-4 12271 3-4"
(75-100mm)
.00005"
(.001mm)
3732XFL-5 12272 4-5"
(100-125mm)
.0001"
(.001mm)
3732XFL-6 12273 5-6"
(125-150mm)
.0001"
(.001mm)
Outside Micrometer Stand
• Converts outside micrometer
to a bench gage
3206 68917 Outside Micrometer Stand
Outside Micrometers
• Advanced sleeve design with
staggered lines and distinct
gures for precise readability
• Micro-lapped carbide measuring faces
• Starrett satin chrome nish – no glare – resists rust
• Set includes six micrometers with standards
in a wood case
436 OUTSIDE MICROMETERS
436.1XRL-1 67994 0-1" .001"
436.1XRL-2 68003 1-2" .001"
436.1XRL-3 68011 2-3" .001"
OUTSIDE MICROMETER SET
S436.1CXRLZ 68044 0-6" .001"
Depth Micrometers
• Range: .001" (0.01mm)
• 3" (75mm) base
• Combination ratchet and speeder
445AZ-3RL 52208 0-3" .001"
445AZ-6RL 52212 0-6" .001"
445AZ-9RL 52216 0-9" .001"
445AZ-12RL 67117 0-12" .001"
Solid-Rod Inside Micrometers
• .001" Graduation
• Rods are insulated
• Each rod marked
with length
124AZ 50542 2-8" 1/2" 6 One 1/2"
124BZ 50546 2-12" 1/2" 10 One 1/2"
Precision Tools for Motorsports
Precision Tools for Motorsports 3
3
Specications subject to change
V-Anvil Micrometers
• Used to check out-of-roundness
from centerless grinding and other
machining operations
• Starrett satin chrome nish – no glare – resists rust
• Advanced sleeve design with staggered lines and
distinct gures for precise and easy readability
T483XRL-1 52491 .093-1" .0001"
T483XRL-2 52494 1-2" .0001"
Crankshaft & Automotive
Disk Brake Micrometers
Crankshaft Micrometer
• Designed for automotive work and
crankshaft measuring
• Measures the diameter of the journal
bearing and main bearing of most crankshafts
• Starrett satin chrome nish - no glare - resists rust
• 2-5/8" (66mm) throat depth
Automotive Disk Brake Micrometer
• Measures wear grooves in the
disc of brake systems
• Flat carbide spindle and a carbide
anvil with a 60° point
• Advanced sleeve design with staggered lines and
distinct gures for precise readability
• Starrett satin chrome nish – no glare – resists rust
T436RLS-3 1/2 65493 1-1/2" (38mm) -
3-1/2" (88mm) .0001"
458AXR 67534 .300-1.300" .001"
458AXRS 67535 .300-1.300" .001"
458BXR 67536 1-2" .001"
458BXRS 67537 1-2" .001"
Inside Micrometer Calipers
• Caliper-type jaws permit quick
inside measurements
• Jaws are hardened and ground
on a radius for accurate feel
without cramping
• Satin chrome reading surface is
glare free and resists rust
700A 52909 0.200-1.200" .0002"
Blade Micrometers with Non-Rotating Spindle
• Designed for measurements of circular
form tools, diameter and depth of
narrow grooves, slots, keyways and
recesses and ns
• Non-rotating spindle
• .030" (0.8mm) thick blade
• Blades will measure to 5/16" (8mm) depths
• With speeder
486P-1 52499 0-1"
.001"
486P-2 52501 1-2"
486P-3 52503 2-3"
486P-4 52505 3-4"
486P-5 52507 4-5"
486P-6 52509 5-6"
starrett.com
starrett.com
4
4
Electronic Calipers
• 798 Series has IP67* level of protection
against coolant, water, dirt and dust
• Hardened stainless steel body for long life
• Fine adjustment thumb wheel
• Large easy-to-read display
• Integrated depth rod
• Resolution: .0005" (0.01mm)
• Accuracy: DIN862
799A-6/150 67410 0-6" (0-150mm)
799A-8/200 67412 0-8" (0-200mm)
799A-12/300 67621 0-12" (0-300mm)
799AZ-24/600 11978 0-24" (0-600mm)
799AZ-40/1000 11979 0-40" (0-1000mm)
798A-6/150 20798 0-6" (0-150mm)
798A-8/200 20799 0-8" (0-200mm)
798B-12/300 12525 0-12" (0-300mm)
Dial Calipers
• Quick, accurate
measurement of O.D., I.D.
and depth
• Hardened stainless steel bar, measuring
surfaces, rack, gears and depth rod
• Sharp, clear dial graduations of .001" with .100"
per revolution
• Sharp, black graduations on the satin nished bar,
every .100"
• 1/64" - .01" on fractional calipers
1202-4 68814 0-4" .001"
1202-6 66964 0-6" .001"
1202-8 66979 0-8" .001"
1202-12 66980 0-12" .001"
1202F-6 68931 0-6" 1/64th - .01"
1202F-8 69757 0-8" 1/64th - .01"
1202F-12 69758 0-12" 1/64th - .01"
120A-6 64514 0-6" .001"
Carbon Fiber Calipers
• Carbon ber construction signicantly
reduces weight, improving maneuverability
• Titanium coated stainless steel outside
measurement jaws for long life and
superior atness
• Large easy-to-read display
• Double sliding jaws with clamping screws
• Includes disk contacts as shown for groove
distance measurements
• Conical and step contacts also available
5002BZ-24/600 14577 0-24"
(0-600mm)
.0005"
(0.01mm)
Vernier Calipers - Metric/Inch with Thumb Roll
• High quality, basic vernier caliper that offers inch and
metric measurement
• Sharp, black graduations on the satin nished bar
• Plastic case included
125MEA-6/150 61660 0-6" (0-150mm)
125MEA-8/200 61882 0-8" (0-200mm)
125MEA-12/300 61886 0-12" (0-300mm)
Precision Tools for Motorsports
Precision Tools for Motorsports 5
5
Specications subject to change
Stainless Steel Pocket Slide Caliper
• Accurate readings for inside and outside measurements
• Inch scale on back of stock
• Knurled thumb pieces
1025-6 53124 6" 0 - 4-3/4" 1/4 - 5" 1-3/8" 1/4" 32nds & 64ths 32nds
Electronic Tool Sets
• Basic starter sets for electronic measuring
• Includes slide calipers and 1" (25mm) micrometer
• Sets include an attractive, protective case
S766AZ 12206 799A-6/150 Caliper /
3732XFL-1 Micrometer
S766MAZ 12207 799A-6/150 Caliper /
3732MXFL-25 Micrometer
Automotive Tool Sets
• Automotive maintenance measuring set,
ideal for everyday use
• Inch measurement
• Furnished in attractive, protective case
S917Z 53102 See below for contents
224ARL 2 – 6" Outside Micrometer with
Interchangeable Anvils and Standards
452B 2-1/2 – 6" Cylinder Gage
124A 2 – 8" Inside Micrometer
172AT 9 Tapered-Leaf Thickness Gage
starrett.com
starrett.com
6
6
Electronic Height Gage
Electronic Height Gage with output
• Resolution: .0005" (0.01mm)
• "Hold" control feature retains a reading at any position
• Fine adjustment for precise positioning accuracy
• Lock screw to hold slide in position
Electronic Height Gage
• Hardened, stainless steel bar for long life
• Fine adjustment thumb roll for precision measurements
• Lock to hold the slide in position
• Hardened, ground, and lapped base with nger grooves
3752-12/300 68815 0-12" (300mm)
3751AZ-6/150 12221 0-6" (150mm)
Electronic & Dial Depth Gages
Electronic Depth Gages
• Exclusive Starrett designed
microprocessor chip
• Hardened stainless steel body and slide for long life
• Removable hook has the screw permanently attached
to prevent loss
Dial Depth Gages
• Sharp, easy-to-read dial graduations of .001-.100"
(0.02-2mm) in one revolution
• Sharp, black graduations on the satin chrome nished
bar, every .100" (1mm)
• Removable hook attachment permits readings from the
edge of a workpiece
3753A-6/150 12258 Electronic Depth Gages
0-6" (0-150mm) Range
3753A-8/200 12259 Electronic Depth Gages
0-8" (0-200mm) Range
3753A-12/300 12260 Electronic Depth Gages
0-12" (0-300mm) Range
450-6 56766 0-6"
450-12 56768 0-12"
Dial Depth Gage
• Knife-edge base and a needle point contact
• Point is 1/2" (12.7mm) long with a
60º included angle
• Padded Case
643JZ 52714 0-.125" .0005" 0-25-0
Steel Rule Depth Gages
• Nicely nished hardened steel head
and accurate, machine divided,
tempered steel rule
• Base is cut out on one side, adjacent to the rule, permitting
easier readings and more accurate measurements
237 51080 0-6" 32nds, 64ths 2-5/8" x 1/8"
237M 51081 0-150mm mm, 1/2mm 66 x 3mm
Precision Tools for Motorsports
Precision Tools for Motorsports 7
7
Specications subject to change
MicroAccurate® B-Grade Rectangular Steel
• Etched, unique serial numbers are included on each block
• Very affordable price makes them ideal for general
shop oor use
• Inch System sets have a tolerance of ±50 μin.
• Sturdy case
RS81B
.100-12.000 in
steps of .001
.200-12.000 in
steps of .0001
81
9 blocks .1001" through
.1009" (steps of .0001)
49 blocks .101" through
.149" (steps of .001")
19 blocks .050" through
.950" (steps of .050")
4 blocks 1.000" through
4.000" (steps of 1 inch)
Hardness Tester
• Provides reliable Rockwell Hardness
values on all types of metal and alloys,
hard or soft, and in many shapes
• Conforms to ASTM E-18 standard
• Furnished with a diamond indentor, a
1/16" (1.6mm) ball indentor, three certied
test blocks, four test tables – 5.87"
(149mm) and 2.5" anvils, 5/8" (15.9mm)
spot anvil and a (63.5mm) at standard
vee anvil – and an accessory case
3814 67754
Ultrasonic Thickness Gage
• Menu driven, multifunctional tester
with basic measurement capabilities
• Designed to measure the thickness
of metallic and non-metallic
materials such as aluminum,
titanium, plastics, ceramics,
glass and any other good
ultrasonic wave conductor,
as long as it has parallel top
and bottom surfaces
3812 67668
starrett.com
starrett.com
8
8
Electronic Indicators
• Simple, powerful, easy-to-use functions
• Large, easy-to-read LCD
3600-5 68813 0.500" range
3600M-5 68918 12.5mm range
Magnetic Base Indicator Holder
• Horizontal and vertical mounting positions
• Has three adjustable pivots controlled by a single knob
for fast, easy indicator positioning
• Positive On/Off switch
660 68621 4.750"
(120mm) Rotary On/Off 70 lbs.
Mini Magnetic Indicator Holder
• Simple, economical tool for a variety of indicator
holding tasks
• No levers or switches – simply place the holder
on the measuring surface, attach the indicator
and position
661 68620
1.180" x 1"
(30mm x
25.4mm)
3/8"
(9.5mm) 1/4" (6.3mm) 4.173"
(106mm)
Flex-O-Post Indicator Holder
• Adjust and lock to any position
657T 52760 Magnetic Base with Flex-O-Post
Assembly
Inspection Kits
• Used for tasks such as setting proper distance or
alignment
• Secure a measuring xture to a stable, reliable surface
at various odd angles in tightly conned spaces
• Invaluable to auto mechanics
S898Z-1 12438 Gripping Plier Insection Kit, Flex Arm
With Indicator and Case
S898Z-2 12437 Gripping Plier Insection Kit, Flex Arm
With Indicator, Mag Base and Case
Magnetic Base Universal Indicator Holder with
Triple-Jointed Arm and Fine-Adjustment
• Indicator holder has three pivots available for positioning
• All pivots are controlled by one tightening knob
657-1 64436
1-15/16"
x 1-5/8"
x 1-7/8"
3/8"
(9.5mm)
Magnetic Base Universal
Indicator Holder
Magnetic Base Indicator Holder
• Base has three precision ground, magnetic contact
surfaces
• V-step holds base to round surfaces
657D 52749 1-15/16" x
1-5/8" x 1-7/8" 3/8" 3/8" 7-7/16"
Precision Tools for Motorsports
Precision Tools for Motorsports 9
9
Specications subject to change
Dial Test Indicators with Dovetail Mounts
• Three dovetail positioning mounts
• Contact points reverse automatically, always maintaining
clockwise hand rotation
• Narrow body for inreach versatility
• Satin chrome nish
• Contacts are frictionally adjustable and replaceable
• Easy-to-read angled head with white dial
• Replaceable contacts are frictionally adjustable
708ACZ 64217 .0001" .010" 0-5-0 13/16" (20mm) .078" (2mm) With Attachments*
709ACZ 64219 .0005" .030" 0-15-0 13/16" (20mm) .078" (2mm) With Attachments*
*Attachments include dovetail body clamp, tool post holder, swivel post snug with dovetail indicator clamp, snug and rod unit
Dial Test Indicators with Swivel Head
• Swivel head feature allows positioning to suit your line of sight from horizontal to vertical and at any angle in between 90°
• Smooth, jeweled movement
811-1CZ 57081 .001" .060" 0-30-0 1-5/16" (33mm) .078" (2mm) In Case with Attachments*
*Attachments include dovetail body clamp (PT22429/EDP No. 72441), tool post holder (PT 11770A/EDP No. 71361), swivel post snug with dovetail
indicator clamp (PT22428/EDP No. 72440), and snug and rod unit (Inch: PT22430/EDP No. 72442 or Millimeter: PT27171/EDP No. 66457)
Last Word Dial Test Indicator
• Steel contact points length: 5/32" (4mm)
• Steel contact points ball diameters: .035" (0.9mm),
.062" (1.6mm), .120" (3mm)
• Ideal for precise measurements in machining, layout,
and inspection work
• Hard chrome-plated ratchet contact point
711GCSZ 52943 .001" .030" 0-15-0 Indicator with ALL
attachments*
*Attachments include 3 contact points – body clamp – universal friction
holder with shank – universal shank complete with long and short arm
– double-jointed attachment – height gage attachment – surface gage
attachment – coupling with 3/16" (4.8mm) hole
Shaft Alignment Clamp Sets
• Designed for fast, precise alignment of motors, pumps,
and compressors
• Lightweight clamp design - black anodized aluminum
• Sets are available with either two Starrett 196B5 or
81-141J indicators or clamps alone
S668CZ 67152 Shaft Alignment Set,196B5 Indicators, Case
S668DZ 67153 Shaft Alignment Set, 81-141J Indicators, Case
S668BZ 67151 Shaft Alignment Set, Clamp, Plate and Posts, Case
S668A 67150 Shaft Alignment Clamp, Plate and Posts
668 67155 Shaft Alignment Clamp Only
starrett.com
starrett.com
10
10
Dial Indicator Groove Gage
• Used for in-process or bench
inspection of oil grooves, snap ring
retainer grooves and “O” ring seat
retainer grooves
• Supplied with two sets of jaws
• Includes three sets of contacts
• Contacts have ush ends so that grooves at the bottom
of blind holes can be gaged
• Contacts are hardened steel with a hard chrome nish
for long life
1175Z 53173 .0005" .375-6" .060" +/- 30
Universal Back Plunger
Dial Indicators
• Accurate and reliable, simple to
operate, rugged with few moving
parts, smooth in operation
• Includes three hardened
contact points, adapter, and four attachments
(clamp, tool post holder, snug and hole attachment)
in case
196A1Z 50697 .001" .200" .100" 0-100
Dial Indicators
• Shockless, hardened steel gear train and
jewel bearings
• Lug-on-center back
• 2-1/4" bezel diameter
25-441J 53295 Dial Indicator 1.00"
25-2041J 53309 Dial Indicators
w/long range 2.00"
25-3041J 53310 Dial Indicators
w/long range 3.00"
25-4041J 53311 Dial Indicators
w/long range 4.00"
Cylinder & Crankshaft Distortion Dial/Strain Gages
Cylinder Gage
• Used to determine taper and out-of-roundness of bores,
offering a quick and accurate way to show your customer
whether new rings or reconditioning is necessary
• Ranges are achieved by the use of two measuring contact
rods; one in the tool and one stored in the hollow handle
• Sled is hardened and ground for long, accurate life and
has two long-line contacts in constant alignment with the
cylinder wall
Crankshaft Distortion Dial/Strain Gage
• Ideal for checking bearing alignment or shaft deection
without dismantling the engine
• Inside measuring gage checks the distortion of
crankshaft
452B 52339 2-1/2 - 6" .001"
696Z 52901 2-3/8 - 18" .001"
Carbon Fiber & Electronic Snap Gages
Carbon Fiber Snap Gages
• Carbon ber insulated handle
• Precise aluminum body
• Adjustable support ensures accuracy
Electronic Snap Gage
• Balanced and compact for comfortable handling
• Simple, logical control buttons for ease-of-use
• Lightweight aluminum frame
5003Z-431-2J 12984 0-2" (0-50mm) .0005"
5003Z-431-4J 12985 2-4" (50-100mm) .0005"
5003Z-431-6J 12986 4-6" (100-150mm) .0005"
5003Z-431-8J 12987 6-8" (150-200mm) .0005"
765A 67659 0-1/2" (0-12.7mm) .0005"
Precision Tools for Motorsports
Precision Tools for Motorsports 11
11
Specications subject to change
Dial Bore Gages
84 Series
• Easily held to inspect bores and hole sizes without
removing the workpiece
• All contacts and centralized plungers are hardened tool
steel for wear and spring-loaded
• Aluminum housing and knurled handle for light weight
and good balance
3089 Series
• Ergonomic design with non-slip insulating grip
• Carbide contacts for extended wear
• 2-point contact
• Resolution: .0005"
82 Series
• Measurements are taken by comparison - master should
be used as a reference standard
• Split-ball contact is self-centering and the two-point
contact makes the gage useful for detecting hole
geometry problems
• Useful for controlling approach to tolerance without
removing the workpiece from a machine
• Interchangeable probes are hard chrome plated and
polished
84Z-134-4J 56270 1-1/2 - 3" .0005"
84Z-134-5J 50392 3 - 5-3/16" .0005"
3089Z-131-715J 12456 .7 - 1.5" .0005"
3089Z-131-1424J 12457 1.4 - 2.4" .0005"
3089Z-131-26J 12458 2 - 6" .0005"
82AZ 55791 .107 - .266" .0001"
82BZ 55792 .217 - .594" .0001"
82CZ 55793 .560 - 1.565" .0001"
Bore Micrometer
• Ground contact points seat the internal
micrometer faster and more accurately
than the spherical contacts found in
other gages
• Resolution: .00025"
• Tungsten carbide measuring faces
on all with 3-point carbide contact
• Setting rings included
78XTZ-500 68131 3/8 - 1/2" Range
78XTZ-625 68132 1/2 - 5/8" Range
78XTZ-750 68133 5/8 - 3/4" Range
78XTZ-1 68134 3/4 - 1" Range
78XTZ-138 67674 1 - 1-3/8" Range
78XTZ-2 67675 1-3/8 - 2" Range
Electronic Internal Micrometers
• IP65 level of protection against coolant, water, dirt and dust
• Resolution to .00005" (0.001mm)
• Carbide measuring faces
780XTZ-1 12027 .750 - 1" (20-25mm)
780XTZ-138 12028 1 - 1.375" (25-35mm)
780XTZ-2 12029 1.375 - 2" (35-50mm)
AccuBore®
• High-quality, trigger-activated, three-point bore gages
• Convenient, single-hand operation provides speed and
control
• Resolution: .00005" (0.001mm)
781XTZ-1 68651 .750 -1" (20-25mm)
781XTZ-138 67685 1 - 1.375" (25-35mm)
781XTZ-2 67686 1.375 - 2" (35-50mm)
starrett.com
starrett.com
12
12
Toolmakers’ Grade Stainless Steel Squares
• Hardened steel squares are used when extreme
accuracy is required
• Beams and blades are hardened, ground,
and lapped to ensure parallelism and straightness
• Beam is grooved at the inner corner for clearance
of burr or dirt
3020-3 12225 2-31/32" (75mm) 1-31/32" (50mm)
3020-4 12226 3-31/32" (100mm) 2-31/32" (75mm)
3020-6 12227 5-29/32" (150mm) 3-29/32" (100mm)
3020-12 12228 12-1/32" (300mm) 6-7/8" (175mm)
Steel Rules
• 5R Grads – Quick-Reading 10ths,
Aircraft Quick-Reading 100ths, 32nds and 64ths
• Made of ne quality steel with easy-to-read
satin chrome nish
• Inspected to Starrett Master Standards
C305R-6 51347 6" 1/2" x 1/64" Full-exible
C305R-12 51348 12" 1/2" x 1/64" Full-exible
C305R-18 51349 18" 3/4" x 1/50" Full-exible
C305R-24 51350 24" 3/4" x 1/50" Full-exible
6" Steel Rule with Decimal Equivalents
• Fraction and decimal equivalent table
C622R-6 56660 Spring-Tempered
Combination Squares
• Hardened steel blade
• 4R Grads – 8ths,
16ths, Quick Reading 32nds, 64ths
• Reversible lock bolts, scriber, spirit level
C11H-4-4R 56360 4" Satin Chrome Cast Iron
C11H-6-4R 56362 6" Satin Chrome Cast Iron
C11H-12-4R 56366 12" Satin Chrome Cast Iron
12" Combination Square Set
• Direct reading double 180° protractor scale
• Set includes square and blade, center head and
protractor head
• 4R Grads
C434-12-4R 51548 Satin Chrome Forged Steel
Precision Rules
• 4R Grads – 8ths, 16ths, Quick-Reading 32nds, 64ths
C604R-6 52678 6" Spring-Tempered
C604RE-6 52660 6" Spring-Tempered
CH604R-6 52673 6" Reversible
Hook Spring-Tempered
C604R-12 52679 12" Spring-Tempered
CH604R-12 52674 12" Reversible
Hook Spring-Tempered
C604R-18 52680 18" Spring-Tempered
CH604R-18 52675 18" Hook Spring-Tempered
C604R-24 52681 24" Spring-Tempered
CH604R-24 52676 24" Hook Spring-Tempered
Steel Folding Rule with
Circumference Measurement
• Measures diameters up to 24" as well as the equivalent
circumference measurement in direct reading
circumference inches, up to 75"
• 8ths and Circumference 8ths on One Side - 16ths on
Reverse Side
471 52483 3/4" x 1/32"
Precision Tools for Motorsports
Precision Tools for Motorsports 13
13
Specications subject to change
AM-2 Angle Meter
• 0-90º
• Fast, easy and inexpensive
angle measurement
• Magnetic base frees hands when
used on ferrous surfaces
• Handy rise, run, angle, and pitch
information on back of tool
AM-2 36080
Miter and Combination Protractors
CP505A-12 12256 Combination Protractor, Miter
Gage, With Compound Cut
Conversion Table and Quick
Roof Pitch Reference
Machinists’ Levels with Ground and Graduated Vials
• Ground and graduated main vials
• Adjustable to a positive setting
• Satin nished brass tube with friction-t closing cover
• Involute groove running the length of the base
98-6 50441 6" (150mm) With Cross Test Vial
98-8 50442 8" (200mm) With Cross Test Vial
98-12 50443 12" (300mm) With Single Plumb Vial and
Cross Test Vial
Cross Test Level and Plumb
• Cast iron with satin nickel nish
• Plumb level at the top for checking squareness
134 50569 2 x 3"
(50 x 75mm)
With Cross Test Vials and
Plumb Vial
Master Precision Level
• Precision-machined on the reference surface
• Groove and bearing ats are machined together
• Auxiliary level vial shows lateral position and assists
in horizontal setting
• Reference surface is scraped
199Z 50719 15" (380mm) 1-5/8" (40mm) 3" (75mm)
Steel Protractors
• Rectangular head on C183 provides
four convenient working edges
• Useful for setting bevels, transferring
angles, small squaring tasks,
checking cutter clearances within
certain limits
• Double graduations from 0-180°
in opposite directions permitting
the direct reading of angles and
supplementary angles
C183 50672 6" 0-180°
C19 50127 6" 0-180°
starrett.com
starrett.com
14
14
Engineers’ Combination Taper,
Wire and Thickness Gage
• Compact steel case
• Locking device keeps leaves in position
• Reverse side has decimal equivalents in thousandths
245 51170
Inch Reading, with Taper Gage, English
Standard Wire Gage and 9 Inch Reading
Thickness Gage Leaves
245M 51171
Millimeter Reading, with Taper Gage, English
Standard Wire Gage and 11mm Reading
Thickness Gage Leaves
Taper Gage
• A very useful tool, especially for bearing work and for
gaging slots
• Accurately tapered throughout its entire length
270 51292 .010-.150"
(0.3-4mm)
Telescoping Gage Sets
• 229 Series range:
1/2-6" (13-150mm)
• Each gage has a handle,
one rigid contact arm and
one spring-tensioned
telescoping contact arm
• 579 gages have two telescoping contacts
• Handles are rigidly attached to contact plungers and
are automatically self-centering
S229GZ 50929 Set of 5, range of 1/2" – 6" in case
S579GZ 52616 Set of 4, 5/16" – 2-1/8" (8mm – 54mm)
in case
S579HZ 52617 Set of 6, 5/16" – 6" (8mm – 150mm)
in case
Small Hole Gages
• Range: .125"-.500"
• All gages are approximately 2" long
• Smooth, sensitive adjustment
S830FZ 53081 Set of 5 (830A, 830B, 830C, 830D, 830E)
in case
Small Hole Gages
• Well balanced
• 829 gages for general work; full-ball gages
• 831 gages ideal for accurately measuring small holes,
slots, grooves, and recesses
829A 53070 Full ball .125-.200"
(3.2-5.1mm) 2-7/8" (75mm)
829B 53071 Full ball .200-.300"
(5.1-7.6mm) 3" (80mm)
829C 53072 Full ball .300-.400"
(7.6-10.2mm) 3-3/8" (85mm)
829D 53073 Full ball .400-.500"
(10.2-12.7mm) 3-1/2" (90mm)
S829EZ 53074 Full ball-Set of
4 in Case
.125-.500"
(3.2-12.7mm)
2-7/8 - 3-1/2"
(75-90mm)
831A 53083 Half Ball .125-.200"
(3.2-5.1mm)
2-13/16"
(70mm)
831B 53084 Half Ball .200-.300"
(5.1-7.6mm) 3-1/8" (80mm)
831C 53085 Half Ball .300-.400"
(7.6-10.2mm) 3-3/8" (85mm)
831D 53086 Half Ball .400-.500"
(10.2-12.7mm) 3-1/2" (90mm)
S831EZ 53087 Half Ball-Set of
4 in Case
.125-.500"
(3.2-12.7mm)
2-13/16 -
3-1/2"
(70-90mm)
Precision Tools for Motorsports
Precision Tools for Motorsports 15
15
Specications subject to change
Time Saver® Tap – hardened,
Jobbers’ – hardened &
Standard Letter Size Drill Gages
Time Saver® Tap and Drill Gage – hardened
• Nos. 1 - 60 (.228-.040") range
• Approximate size, 5/64" thick by 2-5/16"
wide by 6-1/4" long
• Shows correct tap drill for any common
size machine screw tap in National Fine
(NF) or National Coarse (NC) Thread Series
• Gage shows the correct body size drill to use
Jobbers’ Drill Gage – hardened
• Determine size of any twist drill from 1/16-1/2" by 64ths
• 29 holes marked with the drill size in inches and
decimal equivalents
Standard Letter Size Drill Gage
• Quick, convenient checking of letter size drills
• 26 holes for “A” through “Z” drill sizes and decimal
equivalents .234" through .413"
• Satin nish
185 50675 2-56 to
1/4-28 50 to 3 44 to 1/4
187 50677 Jobbers’ Drill Gage
198 50718 Standardized Letter Size Drill Gage
Drill and Steel Wire Gage-hardened
• Used for selecting correct size of twist drills
and steel drill rod
• Each hole is marked with the size number
and the corresponding decimal equivalent
• 186 gages have 60 holes for gaging drills
from No. 1 to 60 (.228-.040") range
• 286 gages have 20 holes for gaging drills
from 61-80 (0.039 - 0.0135") range
186 50676 Drill and Steel Wire Gage
286 51320 Drill and Steel Wire Gage-hardened
Screw Pitch Gages
• Whitworth Standard
• 55º Threads
• 3-1/2-60 TPI (Inch)
• With positive stop
476 52488 30
3-1/2, 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11,
12, 13,14, 16, 18, 19, 20, 22, 24, 25,
26, 28, 30, 32, 36, 40, 44, 48, 50, 60
• V, Unied, American National 60º threads
• International Metric Standard 60º threads
• Consists of a substantial steel case with folding leaves
• Each leaf has teeth corresponding to a denite pitch
marked on the leaf
• Various sizes available
6 50035 Screw Pitch Gage V Unied,
TPI 4 to 42 30
472 52484 Screw Pitch Gage V Unied,
TPI 4 to 84 51
474 52486 Screw Pitch Gage V Unied, 4 to 80 28
156M 50589 Screw Pitch Gage Metric, .25 to 2.5 28
159M 50591 Screw Pitch Gage Metric, 1 to 11.5 28
Thickness Gages
• Leaves made of tempered-steel
and marked with thickness
• Locking device permits locking leaves in position
• Leaves easily removed or replaced
• Rugged steel case protects leaves
• Carefully nished to correct thickness
• Various leaf sizes available
66 50314
Thickness Gage,
26 Straight
Leaves
0.0015-
0.25"
1/2 x
3-1/32" 26 Straight
66T 50315
Thickness Gage,
26 Tapered
Leaves
0.0015-
0.25"
1/2-1/4 x
3-1/32" 26 Tapered
467 52464
Thickness Gage,
13 Straight
Leaves
0.0015-
0.200"
1/2 x
4-1/2" 13 Straight
572A 57098
Thickness Gage,
22 Leaves Plus
SP Wires
0.0015-
0.035"
1/2 x
3-1/32" 22 Straight
starrett.com
starrett.com
16
16
Center Punches
• Made of specially selected steel, hardened
and tempered
• Points are ground at the proper angle to give
maximum service
• Well proportioned with a knurled nger grip
• Tips are accurately centered and ground at the proper
angle to give maximum service
117AA 50482 3" (75mm) 1/16" (1.5mm)
117A 50483 4" (100mm) 5/64" (2mm)
117B 50484 4" (100mm) 3/32" (2.5mm)
117C 50485 4" (100mm) 1/8" (3mm)
117D 50486 4" (100mm) 5/32" (4mm)
117E 50487 5" (125mm) 1/4" (6.5mm)
S117PC 50488 Set of 5, 117AA, A, B, C, D in plastic case
264A 51278 3" (75mm) 1/16" (1.5mm) 3/8" (9.5mm)
264B 51279 3-1/2"
(88mm) 5/64" (2mm) 3/8" (9.5mm)
264C 51280 3-3/4"
(95mm) 3/32" (2.5mm) 3/8" (9.5mm)
264D 51281 4" (100mm) 1/8" (3mm) 3/8" (9.5mm)
264E 51282 4-1/4"
(108mm) 5/32" (4mm) 3/8" (9.5mm)
264F 51283 4-1/2"
(114mm) 3/16" (5mm) 7/16" (11mm)
264G 51284 5" (125mm) 1/4" (6mm) 7/16" (11mm)
S264WB 51285 Set of 7, 264A, B, C, D, E, F, G in round box
Edge Finders
• Locate work surfaces easily, quickly and accurately
• Body and contacts made of tool steel, hardened,
ground and lapped to close tolerances
827A 53062 Single End .375" .200"
827B 53063 Double End .500" .200" and
pointed contact
Drive Pin Punches for Machine Shop and
Motor Service Work
• Drive pin sections are 3-1/2" (90mm) long
• Well-proportioned, hardened, properly tempered
• Designed to withstand hard use
• Each punch has the size stamped on the head
• Knurled grip
248A 51181 8" (200mm) 1/8" (3mm)
248B 51182 8" (200mm) 3/16" (5mm)
248C 51183 8" (200mm) 1/4" (6mm)
248D 51184 8" (200mm) 5/16" (8mm)
248E 51185 8" (200mm) 3/8" (9.5mm)
S248PC 51186 Set of 5 punches (1 of each size)
in protective vinyl case
565A 52578 4" (100mm) 1/16" (1.5mm)
565B 52579 4" (100mm) 3/32" (2.5mm)
565C 52580 4" (100mm) 1/8" (3mm)
565D 52581 4" (100mm) 5/32" (4mm)
565E 52582 4" (100mm) 3/16" (5mm)
565F 52583 4" (100mm) 7/32" (5.5mm)
565G 52584 4" (100mm) 1/4" (6mm)
565H 52585 4" (100mm) 5/16" (8mm)
S565WB 52586 Set of 8 punches (1 of each size)
in round box
S565PC 52587 Set of 8 punches (1 of each size)
in protective vinyl case
Square-Head Nail Sets
• Round knurled grip
• Large, square head provides a large striking surface
• Punch surface is cupped to follow the nail without
sliding off
• Punch diameter clearly marked on the head
800A 53029 4" (100mm) 1/32" (0.8mm)
800B 53030 4" (100mm) 1/16" (1.5mm)
800C 53031 4" (100mm) 3/32" (2.5mm)
800D 53032 4" (100mm) 1/8" (3mm)
800E 53033 4" (100mm) 5/32" (4mm)
S800PC 64131
Precision Tools for Motorsports
Precision Tools for Motorsports 17
17
Specications subject to change
Prick Punches
• Use when precise positioning of a point or an
intersection is required
• Points ground to the correct taper – sharper than the
normal center punch
• Allows exact placement of point to provide sharp
impressions
816A 53043 4" (100mm) 5/64" (2mm)
816B 53044 4" (100mm) 1/8" (3mm)
816D 53046 4" (100mm) 5/32" (4mm)
S816PC 57078
One each 816A, B, D
and two center punches
117AA, B – in plastic case
Brass Drive Pin Punches
• Drive pin sections are 3-1/2" (90mm) long
• Non-marking brass
• Knurled grip
• Well proportioned, hardened, properly tempered
• Each punch has the size stamped on the head
B248B 12460 Brass Drive Pin Punch, 8", 3/16" Dia
B248C 12461 Brass Drive Pin Punch, 8", 1/4" Dia
B248D 12462 Brass Drive Pin Punch, 8", 5/16" Dia
B248E 12463 Brass Drive Pin Punch, 8", 3/8" Dia
SB248Z 12464 Brass Drive Pin Punch, Set, B248B/C/D/E, case
B565A 12465 Brass Drive Pin Punch, 4", 1/16" Dia
B565B 12466 Brass Drive Pin Punch, 4", 3/32" Dia
B565C 12467 Brass Drive Pin Punch, 4", 1/8" Dia
B565D 12468 Brass Drive Pin Punch, 4", 5/32" Dia
B565E 12469 Brass Drive Pin Punch, 4", 3/16" Dia
B565F 12470 Brass Drive Pin Punch, 4", 7/32" Dia
B565G 12471 Brass Drive Pin Punch, 4", 1/4" Dia
B565H 12472 Brass Drive Pin Punch, 4", 5/16" Dia
SB565Z 12473 Brass Drive Pin Punch Set, 8 piece, case
Automatic Center Punch with Adjustable Stroke
• Lightweight, knurled aluminum handle for a
positive grip and easy handling
• No hammer required. Just hold the punch in
an upright position and press the handle down
to strike a perfect center mark every time
• Force of the blow can be adjusted by turning
the knurled cap
• Hardened tool steel point is easily removed
for resharpening or replacement
818 53048 5" (125mm) 5/8" (16mm)
Non-Slip Tool Pad
• Large, embossed surface Tough Grip™
• Size: 24" x 36"
TG-36 68853
Tap Wrenches
Tap Wrenches
• Strong and well-proportioned
• Tempered gripping surfaces rmly hold
square or round shanks
• Plunger operated by knurled sleeve
T-Handle Tap Wrenches
• For holding taps, drills, reamers and small tools to be
turned by hand
• Body is centered for use on lathe centers or upright
drilling machines to start tap straight
91A 50419 1/16 - 1/4"
(1.6 - 6.35mm)
3/32 - 5/32"
(2.4 - 4mm) 6" (150mm)
91B 50420 3/16 - 1/2"
(4.7 - 12.7mm) 5/32 - 9/32" 9" (225mm)
91C 50421 1/4 - 5/8"
(6.35 - 16mm)
5/32 - 3/8"
(4 - 9.5mm) 12" (300mm)
91D 50422 5/16 - 3/4" 13/64 - 7/16"
(5.2 - 11mm) 16" (400mm)
93A 50427 1/16 - 3/16"
(1.6 - 4.7mm)
1/16 - 5/32"
(1.6 - 4mm) 2" (50mm)
93B 50428 7/32 - 7/16"
(5.5 - 11mm)
5/32 - 1/4"
(4 - 6.4mm) 2-1/2" (65mm)
93C 50429 1/4 - 1/2"
(6.4 - 12.7mm)
3/16 - 5/16"
(4.7 - 8mm) 3-1/2" (90mm)
Pin Vises with Insulated, Octagonal Handles
• Useful for holding small stock, taps, drills, reamers,
scribers, wire, small les, and other tools
• A hole extends through the full length of the
handle so that wires can be held
166A 50609 0 - .040" (0-1mm)
166B 50610 .030 - .062" (0.8 - 1.6mm)
166C 50611 .050 - .125" (1.3 - 3.2mm
166D 50612 .115 - .187" (2.9 - 4.8mm)
S166Z 50614 Set of all 4 sizes in protective vinyl case
starrett.com
starrett.com
18
18
V-Blocks and Clamps for Round
or Square Work
• Clamps have screw holes at 45° and
90° to hold either round or square work
• 3/8-16 tapped holes for mounting
blocks on faceplates or angle irons
• Hardened steel, precision ground, parallel, and square
568A 52590 1 V-Block and Clamp
2" (50mm) round, 1-7/16"
(36mm) square (1-9/16"
(40mm) with Screw at Top)
568C 52592
Complete set with
2 V-Blocks and
2 Clamps
(matched pair)
2" (50mm) round, 1-7/16"
(36mm) square (1-9/16"
(40mm) with Screw at Top)
Dual-Vee Magnetic V-Block
• All working surfaces are precision ground
• Two precision vees will hold round stock sizes from
1/4 - 1-3/4" (6.4 - 44mm) diameters
• Powerful, permanent magnet controlled by a rotary
switch provides sufcient holding power for positive
location
• All working surfaces are heat treated for long wear and
stability
566 63323 Dual-Vee Magnetic Block 1-3/4" (44mm)
V-Blocks and Clamp
• The blocks are made of cast iron, each 1-1/2" (38mm)
square and 2" (50mm) long
• The clamp is ribbed for extra strength and will hold work
up to 1-1/8" (28mm) in diameter
268C 51289 2 V-Blocks (One Pair) Clamp 1-1/8"
Electronic Inspection Scope
• Three light intensity settings
• Water resistant shaft with high quality metal tip
• LEDs provide imaging and illumination
• 2.5" full color LCD screen displays live video from the
digital camera
679-3 60360 Video Inspection Scope with 3" Shaft
679-6 60361 Video Inspection Scope with 6" Shaft
Lubricants
M1® All-Purpose Lubricant
• Dries as it protects, avoiding dirt and grime
that other lubricants attract
• Prevents rust and corrosion damage with
a molecular shield that bonds to the metal
• Cleans and polishes for lasting protection
• Non-soluble in water with a lm that protects and
lubricates
Tool and Instrument Oil
• Provides thorough lubrication of close-tting parts
• Leaves a strong lasting lm
M1 95173 95173 12 oz. (0.3 Liter) Aerosol Can
M-1.01 93221 1 Gal. (3.75 Liters) Container
M-1.05 93227 5 Gal. (19 Liters) Pail
1620 53216 4 . oz. (0.1 liter) Plastic Bottle
Precision Screwdrivers
• Precision-machined tips
• Vapor-chromed non-slip tips
• Hardened for maximum durability
• Tapered handles allow rapid rotation
• Spin-free nger control cap for precise turning and control
S551Z-7 67203 Set of 7 Screwdrivers with Case
Toolmakers Hammer
• Allows faster, easier and more accurate spotting
and punching of centerlines and intersections
• A magnifying lens built into the head of the
hammer eliminates the need for a separate glass
• High-power magnication makes it easier to spot
the punch and strike
• Chromium plated nish
815 53041
Adjustable-Jaw Cut Nippers
• Ideal for all applications involving wire cutting
• Special design provides powerful leverage for efcient
and clean cutting
• All jaws can be detached and replaced, or resharpened
• Jaws can be adjusted on the frames
• Each jaw has an allowance of about 1/4" (6.4mm)
1-7 50001
Precision Tools for Motorsports
Precision Tools for Motorsports 19
19
Specications subject to change
Starrett HB400 Optical Comparator
• 16" (400mm) screen diameter
• Vertically correct image v
• 12" x 6" (300 x 150mm) measuring
range (extended 16" X-axis
measuring range available)
• 21.25" x 5.125" (540 x 130mm)
staging area
• Dual xturing slots
• Screen-mounted overlay chart clips
• Twin-bundle, adjustable on-axis, ber optic surface
illumination
• Operator glare shields for surface illumination
• Helix angle stage adjustable +/- 15º
• Quick-change, bayonet style lens mount
• Heidenhain .00005" (0.001mm) resolution scales
• Centrally mounted vertical (Y-axis) scale (in-line with
lens/workpiece)
• Threadless X-axis quick release for “zero” backlash
• Protective guideway covers for both X and Y axes
• 10x, 20x, 25x, 31.25x, 50x, and 100x magnications
available
HB400 Optical Comparator
KineScope Digital Video
Camera
• Precision optics and LED
lighting
• Fits in the palm of your hand
• 40-140x magnication to zoom
in on the ne details
• Capture images or video and easily add labels,
make measurements, and draw on the live image
• Connects to your computer’s USB port
• Includes VLink imaging software
• Resolution: 4 microns
KineScope Digital Video Camera
KineMic™ Video Microscope
• Modular-video based inspection system
• Ideal for quality assurance, receiving inspection, training,
manufacturing, assembly, research and documentation
• Includes a microscope stand with coarse-ne focus
control and zoom lens with a 6:1 ratio magnication
range, LED illumination, hi-resolution color video
camera and 15" LCD monitor
• Features, Specications & Options:
– Monitor: 34x to 215x
– Field of view: .360" low to .056" high
– Camera: Color CCD/S-Video output
– Lighting: LED Ring
KineMic™ Video Microscope
DataSure®
• 100% Data Collection – Error-Free and Fast
• Lets you perform real-time, 100% error-free data collection
• Much faster than manual inspection and data entry
• For more details visit Starrett.com
starrett.com
starrett.com
20
20
Reciprocating Blades
• Bi-metal unique® saw blades for pneumatic
(or air) reciprocating saws
• Line includes three blades for metal and
a variable pitch multipurpose blade for
composites, steel sheets and wood
• Dimensions (Length x Width x Thickness):
3-5/8" x 1/2" x .024" (92mm x 13mm x 0.60mm)
14 B414-2 16970 B414-5 15319 B414-20 20104
18 B418-2 16971 B418-5 15320 B418-20 20105
24 B424-2 16972 B424-5 15321 B424-20 20106
Pneumatic Reciprocating Blades
• Industrial quality, high speed steel edge bi-metal blades
• High speed steel cutting edge is welded to a tough,
exible back
• Provides long life and makes them virtually unbreakable
• Dimensions (Length x Width x Thickness): 4" x 3/4" x
.035" (100mm x 19mm x 0.90mm)
32 Metal
Cutting BS226-5 13001 BS226-20 13005
24 Metal
Cutting BS227-5 13002 BS227-20 13006
18 Metal
Cutting BS228-5 13003 BS228-20 13007
14-18 Multi-
Cutting BS229-5 13004 BS229-20 13008
Unified Shank® Jig Saw Blades
• Starrett’s exclusive, patented design
has changed the shape of one of the
most commonly used tools in the industry
• The rst and only blades that t both
Universal and Bosch tools
• Perfect for contractors with multiple saws
BU3 68750 5 Blade/Pitch Metal Cutting Assortment Pack
Hole Saw Kits
• Starrett variable pitch hole saws have
been the industry standard for decades
• Exceptionally strong and shatter resistant
KAV1096 65606
7/8" (22mm), 1" (25mm),
1-1/8" (29mm), 1-1/4" (32mm),
1-1/2" (38mm)
5 Saws, Arbors
& Accessories
KS1090 60703
3/4" (19mm), 7/8" (22mm),
1" (25mm), 1-1/8" (29mm),
1-1/4" (32mm)
5 Saws, Arbors
& Accessories,
A1, A12
Heavy Duty Hacksaw Frame with Blade
• Professional quality closed grip
• High-tension, heavy duty with easy to use adjustment
lever and sure ergonomic grip
bi-metal unique® HSS Safe-Flex® Hacksaw Blades
• Reduces blade fracture and breakage for faster cuts and
longer life
K145 67818 Closed Grip High-Tension Heavy-Duty Hand
Hacksaw Frame
KBS1024-2 40334 10" x 1/2" x 025" 2/Card
KBS1218-2 40336 10" x 1/2" x 025" 2/Card
KBS1224-2 40337 10" x 1/2" x 025" 2/Card
KBS1232-2 40338 10" x 1/2" x 025" 2/Card
KBS1218-10 40342 10" x 1/2" x 025" 10/Pack
KBS1224-10 40343 10" x 1/2" x 025" 10/Pack
KBS1232-10 40344 10" x 1/2" x 025" 10/Pack
Precision Tools for Motorsports
Precision Tools for Motorsports 21
21
Specications subject to change
Locking Thin Tape
• Yellow case is thin, durable and compact
• Easy-to-read black markings on the tape line
• Push-button lock at the side of the base
Y14-10L 12159 1/4" Wide, 10" Length, 16ths Consecutive In.
Engineers’ Tape
• Industrial Quality Tape Measure
• Top edge graduated in 16ths and numbered in
consecutive inches
• Bottom edge graduated in 100ths of a foot and
numbered in 10ths of a foot and repeat
Y12-10T 12156 1/2" Wide, 10" Length
Decimal/English/Metric Tape
• Top edge of the tape line is graduated in millimeters
• Bottom edge the rst foot is graduated in 50ths (.020")
of an inch
• The balance of the tape is graduated in 10ths of an inch
• Popular in the heavy equipment manufacturing industry
CH12-100ME 65792 Decimal/English/Metric Tape
Wooden Tool Box
• Starrett classic style chest constructed entirely in solid wood
• Red oak and veenered plywood construction with tongue and
groove joinery insures strength and durability
• Hardwood design provides protection from moisture
• Green felt-lined interior provides cushioning
• Hand rubbed stain with lacquer nish
• Polished chrome plated hardware
• Front lid stows under drawers in the open position, and covers
drawers in locked position
300W 20819
AM-9 Aluminum Torpedo Level
• Cast aluminum frame with lapped working surfaces
• V-grooved top working surface
• 3 Vials (1 Plumb, 1 Level, 1 45º), side and top Reading
AM-9 36071 Aluminum Torpedo Level
Oil-Gaging Measuring Tapes
• The satin chrome steel tape lines
are easy to read and corrosion resistant
• Includes swivel snap at the end of the
line for hooking the plumb bob on
C507CB-50 55454 1/2" Wide 8ths Grads, 50" Length Without
Plumb Bob
CONTACT:
The L. S. Starrett Company
121 Crescent Street
Athol, MA 01331 U.S.A.
(978) 249-3551
Starrett Metrology Divison
26052 Merit Circle, Suite 103
Laguna Hills, CA 92653
(949) 348-1213
©The L.S. Starrett Company
Specications subject to change
Bulletin 1400 5M/S 11/10
