TELEPHONE: 814-362-5536 FAX: 814-362-8883
52
SPEER ELECTRONICS, INC.
DIMENSIONS L W H a b
mm 10.4±0.2 8.0±0.2 7.5 max. 10.2 max 2.5±0.2
in .409 .315 .295 max. .393 max .098
CHIP COIL
LPC 10065
WIRE WOUND SMT CHOKE COIL
LPC 10065 TE 331 K
Type Size Code Packaging Nominal Inductance Tolerance
Wound Core Diameter: 10 mm TE: Embossed Taping Example K: ±10%
Wire Form Product Height: 10.4 mm No Designation: Bulk 331: 330
µ
H M: ± 20%
ORDERING & SPECIFYING INFORMATION*
*Please Note: KSE’s Part Numbers Do Not Contain any Spaces or Hyphens.
CHIP COIL
- Small size allows for High Mounting Density
- Suitable for Reflow Solder
- Large DC Current capability with Low DC resistance
- Embossed Carrier Tape available
- Polarity Identification available
- E - 6 Series of Values (customs available)
DIMENSIONS
Wb
a
Ceramic board Polyurethane copper wire
L
b
L
Solder terminal
WH
Ferrite
core
b
CHIP
INDUCTORS
TELEPHONE: 814-362-5536 FAX: 814-362-8883
53
SPEER ELECTRONICS, INC.
INDUCTANCE
QUALITY FACTOR
SELF DC ALLOWABLE
TYPE TOLERANCE MEASURING MEASURING FREQ. RESISTANCE DC CURRENT
(µH) (%) FREQUENCY (MIN) FREQUENCY MIN. (MHz) MAX. (mΩ) MAX. (A
)
LPC10065TER68 0.68 75 6.0 9.50
LPC10065TE1R0 1.0 65 7.0 9.00
LPC10065TE1R5 1.5 M(±20%) 50 8.0 8.50
LPC10065TE2R2 2.2 40 9.0 7.50
LPC10065TE3R3 3.3 30 11.5 6.80
LPC10065TE4R7 4.7 25 16.5 5.70
LPC10065TE6R8 6.8 20 23.5 4.70
LPC10065TE100 10 15 36.0 3.90
LPC10065TE150 15 12 54.0 3.15
LPC10065TE220 22 9 80.0 2.60
LPC10065TE330 33 8 120 2.30
LPC10065TE470 47 6 175 1.79
LPC10065TE680 68 5 255 1.48
LPC10065TE101 100 4 380 1.22
LPC10065TE151 150 3 580 1.00
LPC10065TE221 220 2.5 850 0.82
LPC10065TE331 330 2.0 1300 0.67
LPC10065TE471 470 1.5 1850 0.57
LPC10065TE681 680 1.0 2700 0.47
LPC10065TE102 1000 0.95 4000 0.38
LPC10065TE152 1500 0.85 6100 0.31
LPC10065TE222 2200 0.70 9000 0.26
LPC10065TE322 3300 0.55 13500 0.21
STANDARD APPLICATIONS
CHIP COIL
LPC 10065
WIRE WOUND SMT CHOKE COIL
K(±10%)
RESONANT
1 MHz
100 MHz
40
30
20
15
30
2.52 MHz
100 MHz
CHIP
INDUCTORS
