09/2008
55
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
J S N
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage
e = 100V; G = 160V; I = 250V
Digit 5 Size code (see table 1):
Digit 6 to 9 Digits 7-8-9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
optain the rated Capacitance in pF.
Digit 10 Capacitance Tolerance:
K=±10%; M=±20%;
Digit 11 Dielectric: B=PeT H.T.
Digit 12 Version (see table1):
6 and 8 = see drawing
A to P = special
Digit 13 Packaging
M=bulk; L=taped (tray)
Digit 14 Internal use
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
Terminals
Code digit 12
Size code (Digit 5)
60.80 (K) 60.115 (J) 60.160 (L)
Wterminal = 20,0 mm 6 6 *
Wterminal = 30,0 mm *
Wterminal = 40,0 mm 8
*also available upon special request.
Table 1
MOUNTING & SOLDERING
• JSN series is to be mounted with reow process (see
thermal prole) or gluing.
CAUTION
Hand assembly
In case of hand assembly with soldering iron the following
reccomandation must be taken :
• Maximum temperature on the soldering iron:
250°C for (max time 5s)
Avoid contact between the soldering iron and the body of the
capacitor
If PC Boards are assembled by hand, care must be taken to
avoid mechanical damage. We recommend:
- using tweeezers, the components should be gripped across
the two terminals
- the usage of a pen under vacuum on the capacitor is
recommended
Market Applications
JSN series (Jumbo Stacked Naked) lm capacitor has been designed especially for Automotive Power Electronics
applications that require high reliability long life and severe working conditions (high operating temperature and very
stressable mechanical and vibration requirements).
Some of the applications for both the 14V and 42V Powernet are the following:
Integrated Starter Alternator, Camless, Common rail, electric Power steering, climate control, DC/DC and AC/ DC
converters.
JSN series could be used for the power electronics in electric/hybrid and fuel cell cars.
Moreover JSN series is suitable to be used for low power DC/DC and AC/DC converters for Telecom and Industrial
applications like radio link, telecom central ofce, small welding machines ecc.
d (±1.0) 2.0mm
a (±1.0) 2.0mm
t (±0.1) 0.2mm
09/2008 56
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
All dimensions are in mm
Rated
Cap. Size
code
100Vdc / 63Vac Part number
W
Max H
Max L
Max
Max
dv/dt
(V/µs)
Max K0
(V2/µs)
10 µF 60.80 21.5 7.0 17.0 27.0 5.4 e3 JSNeK5100-B6--
15 µF 60.115 30.0 8.0 17.0 27.0 5.4 e3 JSNeJ5150-B6--
22 µF 60.80 21.5 14.0 17.0 27.0 5.4 e3 JSNeK5220-B6--
33 µF 60.115 30.0 15.0 17.0 27.0 5.4 e3 JSNeJ5330-B6--
47 µF 60.160 42.9 15.0 17.0 27.0 5.4 e3 JSNeL5470-B8--
68 µF 60.160 42.9 21.0 17.0 27.0 5.4 e3 JSNeL5680-B8--
Tolerance: K (±10%); M (±20%)
Packaging
Internal use
Rated
Cap. Size
code
250Vdc / 160Vac Part number
W
Max H
Max L
Max
Max
dv/dt
(V/µs)
Max K0
(V2/µs)
10 µF 60.115 30.0 20.0 17.0 40.0 20.0 e3 JSNIJ5100-B6--
15 µF 60.160 42.9 20.0 17.0 40.0 20.0 e3 JSNIL5150-B8--
Tolerance: K (±10%); M (±20%)
Packaging
Internal use
Rated
Cap. Size
code
160Vdc / 90Vac Part number
W
Max H
Max L
Max
Max
dv/dt
(V/µs)
Max K0
(V2/µs)
10 µF 60.80 21.5 15.0 17.0 35.0 11.2 e3 JSNGK5100-B6--
15 µF 60.115 30.0 15.0 17.0 35.0 11.2 e3 JSNGJ5150-B6--
22 µF 60.115 30.0 23.0 17.0 35.0 11.2 e3 JSNGJ5220-B6--
33 µF 60.160 42.9 23.0 17.0 35.0 11.2 e3 JSNGL5330-B8--
Tolerance: K (±10%); M (±20%)
Packaging
Internal use
Customized versions (voltage,size,capacitance) available on request
09/2008
57
GENERAL TECHNICAL DATA
Dielectric: Metallized polyester lm (PET H.T.).
Construction: Stacked Naked capacitor with special
terminals.
Terminals: Copper tinned lead frame.
Customized terminals aravailable
upon request.
Marking: Manufacturer’s logo,
capacitance, D.C. rated voltage.
Operating temperature range -55°C up to 125°C
Climatic category: 55/125/56 IeC 60068-1
Storage conditions: Temperature range: 0°C up to +40°C
Humidity: 60% R.H. max.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 100Vdc, 160Vdc, 250Vdc,
Category Voltage (Vc): VC=VR up to 105°C.
For temperatures between +105 and
+125°C a decreasing factor of 1.25%
per degree °C has to be applied.
Rated temperature(TR): +105°C.
Capacitance range: 10µF to 68µF.
Capacitance values: e6 series (IeC 60063 Norm).
Capacitance tolerance (measured at 1kHz):
±10% (K); ±20% (M)
(other tolerances are available
upon request)
Dissipation Factor (tgδ): ≤ 0.01 at 1kHz – T=25°C±5°C
Insulation Resistance:
Test conditions
Temperature +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥ 250s for VR = 100Vdc
≥ 400s for VR = 160Vdc
≥ 800s for VR = 250Vdc
Test voltage between terminations:
1.4x VR applied for 2s at +25°C±5
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤ 7%
DF change (∆tgδ): ≥ 50x10-4 at 1kHz
Insulation resistance: ≥ 50% of limit value
Endurance:
Test conditions
Temperature: 125°C ±2°C
Test duration: 2000 h
Voltage applied: 1.25xVC
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 50x10-4 at 1kHz
Insulation resistance: ≥ 50% of limit value
Rapid change of temperature:
Test conditions
Temperature: 1h at -55°C; 1h at +125°C
Number of cycles: 1000
Performance
Capacitance change |∆C/C|: ≤ 3%
DF change (∆tgδ): ≤ 50x10-4 at 1kHz
Insulation resistance: ≥ limit value
No mechanical damage.
Long term stability (after two years):
Storage: standard environmental
conditions.
Performance
Capacitance change |∆C/C|: ≤ 3%
Reliability ( reference MIL HDB 217):
Failure rate: ≤ 1 FIT (40°C – 0.5x VR)
Failure criteria: Typical open circuit
Capacitance change: |∆C/C|>10%
DF change: (∆tgδ.>2xinitial limit)
Insulation resistance: > 0.005 x initial value
09/2008 58
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
Size code
60.80
60.115
60.160
A
21.9
30.4
43.3
B
5.0
5.0
5.0
C
10.2
10.2
10.2
D
20.4
20.4
20.4
Typical Thermal prole for reow process:
09/2008
59
MAX. VoLTAGe (Vr.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C)
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
Note: *Th= max. ambient temperature surrounding the capacitor or hottest contact point (i.e. tracks ), whichever is higher, in
the worst operation conditions in °C
10 µF
09/2008 60
MAX. CURReNT (Ir.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C)
JSN
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
PRoDUCT CoDe: JSN
Note: *Th= max. ambient temperature surrounding the capacitor or hottest contact point (i.e. tracks ), whichever is higher, in
the worst operation conditions in °C
Polypropylene Capacitors
Series Style Typical
application
Rated voltage Capacitance
range Page
All Typical graphs 62 to 63
160Vdc 0.022μF…4.7μF
250Vdc 0.010μF…3.3μF
400Vdc 6800pF…1.5μF
A70 MKP Axial Multipurpose
applications 630Vdc 1000pF…0.68μF
64 to 68
100Vdc 4700pF…0.010μF
250Vdc 2200pF…0.015μF
400Vdc 47pF…0.010μF
630Vdc 0.015μF…0.33μF
1000Vdc 3300pF…0.10μF
1500Vdc 2200pF…0.068μF
A72 KP Axial High
current
applications
2000Vdc 1000pF…0.047μF
69 to 73
420Vdc 0.010μF…22μF
520Vdc 0.010μF…22μF
630Vdc 0.010μF…15μF
R71
MKP
Box
Pitch:
10mm…37.5mm
P.F.C.
applications 1000Vdc 0.22μF…10μF
74 to 78
100Vdc 0.047μF…0.15μF
160Vdc 0.033μF…0.10μF
250Vdc 0.015μF…0.047μF
400Vdc 0.010μF…0.047μF
630Vdc 0.010μF…2.2μF
1000Vdc 3300pF…1.5μF
1250Vdc 2200pF…0.82μF
1600Vdc 1000pF…0.56μF
R73
KP
Box
Pitch:
15mm…37.5mm
High
current
applications
2000Vdc 100pF…0.22μF
79 to 88
250Vac 0.010μF…0.15μF
400Vac 2200pF…3.3μF
500Vac 1000pF…2.2μF
700Vac 470pF…1.0μF
900Vac 1000pF…0.47μF
600Vac
MINI version 470pF…0.018μF
500Vac
(125°C) 1000pF…0.1μF
R74
MKP
Box
Pitch:
10mm…37.5mm
A.C.
applications
700Vac
(125°C) 680pF…0.068μF
89 to 104
250Vdc 0.027μF…33.0μF
400Vdc 0.010μF…15.0μF
630Vdc 1000pF…8.2μF
1000Vdc 220 pF…3.9μF
1250Vdc 8200pF…2.2μF
1600Vdc 3900pF…1.5μF
R75
H.P.
MKP
Box
Pitch:
7.5mm…37.5mm
D.C.
and
Pulse
applications
2000Vdc 1000pF…1.0μF
105 to 115
250Vdc 6800pF…15.0μF
400Vdc 2700pF…8.2μF
630Vdc 680pF…5.6μF
1000Vdc 220pF…2.2μF
1600Vdc 3300pF…1.2μF
R76
MMKP
Box
Pitch:
7.5mm…37.5mm
D.C.
and
Pulse
applications
2000Vdc 100pF…0.68μF
116 to 127
250Vac 0.0270μF…0.10μF
300Vac 0.010μF…0.10μF
400Vac 5600pF…0.10μF
500Vac 1000pF…0.10μF
700Vac 1000pF…0.027μF
R77
MMKP
Box
Pitch:
10mm…27.5mm
A.C.
applications
900Vac 1000pF…0.018μF
128 to 133
160Vdc 0.039μF…0.22μF
250Vdc 0.012μF…0.15μF
400Vdc 3900pF…0.047μF
R79 MKP
Box
Pitch: 5mm
Multipurpose
applications 630Vdc 1000pF…0.018μF
134 to 138
250Vdc 2.2μF…56μF
400Vdc 1.5μF…33μF
JSP
MKP
Box
pitch:
22.5mm…37.5mm
D.C.
multipurpose
applications 630Vdc 1.0μF…22μF 139 to 144
61
09/2008 62
POLYPROPYLENE FILM - TYPICAL GRAPHS
Capacitance change vs. temperature at 1kHz
Dissipation factor vs. temperature at 1kHz
Time constant vs. temperature
Capacitance change vs. frequency (Room temperature)
Dissipation factor vs. frequency (Room temperature)
09/2008
63
POLYPROPYLENE FILM - TYPICAL GRAPHS
Impedance vs.frequency (lead length 2mm).
Typical values.