FPC/FFC Connector FP-10 Series 1.0mm Spacing (DIP) Straight Type CFP01 -01 3.2 No. of Pins 1 (Spacing) A s Features Yes No B Right-Angle Type CFP03 -01 A No. of Pins 1 (Spacing) Pin No.1 0.3 Yes No n s l 1. FP-101.0mmFPC/FFC 2. ZIF 3. 2 1. 2. 3. 4. 5. ACDC 50V 0.5A 30m DC500V 1000M AC500V 1 -2585 B No. of Pins A B C 5 6 7 8 9 10 11 12 13 04.0 05.0 06.0 07.0 08.0 09.0 10.0 11.0 12.0 09.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 10.2 11.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 05 06 07 08 09 10 11 12 13 PC Board Dimension 2 0.05 No. of Pins A B C 14 15 16 18 19 20 22 26 29 13.0 14.0 15.0 17.0 18.0 19.0 21.0 25.0 28.0 18.0 19.0 20.0 22.0 23.0 24.0 26.0 30.0 33.0 19.2 20.2 21.2 23.2 24.2 25.2 27.2 31.2 34.2 Applicable FPC Dimension FPC t = 0.3 0.05 A 2.0 0.1 A +0.05 Pin No.1 +0.1 0 0.6 Copper foil 4 2 0.05 14 15 16 18 19 20 22 26 29 1.0 +0.15 03 1 0.05 0. 94V-0 94V-0 8 0. 0.5 2 With Kink 01 02 5.2 xx 4.45 C (When contact) 0.5 2 Material and Plating Housing : Polyphenylene Sulfide (Natural Color)94V-0 Cover : Polyphenylene Sulfide (Natural Color)94V-0 Contact : Phosphor Bronze Tin-lead Plating Pin No.1 3.2 1. Rating : 0.5A 50V AC/DC 2. Contact Resistance : 30m max. 3. Insulation Resistance : 1000M min. at 500V DC 4. Withstanding Voltage : 500V AC for one minute 5. Operating Temperature Range : -25C to +85C With Kink 01 02 3.1 Specifications xx 1.8 1. The FPC/FFC connector in this series apply to the 1.0 mm spacing. 2. Of the ZIF structure. 3. These connectors are available in two contact types: straight and right-angle type. 3.1 n 5.2 1.8 (When contact) C Insertion Surface