The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields FX12 Series Dual Shields (when mated) Patent Pending Header-side shield Receptacle-side shield Metal fittings 1. Dual shields Built-in shield plates and metal fittings in the plugs and receptacles prevent electromagnetic emission and external interference on the entire 360 periphery of mated connectors. 2. Low-Profile Board-to-Board distance of 1.5 mm and reduced PCB mounting pattern allows use in applications where space is limited. High Shielding Effectiveness Emitted Noise Level (dBm) Features Without shield plates With shield plates 3. Self alignment Frequency (GHz) Built-in self-alignment feature in the plug and receptacle allows mating / un-mating in limited spaces. 4. Consistent mated retention force Indents in the shield plates and contact configuration assure consistency of the mated retention forces irrespective of the contact numbers. Positive "click" sensation confirms fully mated condition. Low-Profile, Space-Saving with Reduced Connector Footprint (Shown 24-Position - fully mated) 5. Solder wicking prevention Nickel plating barrier on the contacts prevents solder compound intrusion (wicking) into the contact engagement areas. 6. Board placement with automatic equipment Packaged on tape-and-reel, the connectors have flat areas (0.8mm) to allow use of vacuum nozzles. 7. RoHS Compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. Self Alignment of 0.3 mm Receptacle Plug A263 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.5 be discontinued soon. Please checkConnectors the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX12 Series0.4 mm Pitch, mm Board-to-Board with Dual Shields Specifications Current rating 0.3A Voltage rating 30V AC Rating Item 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance 4.Vibration 5.Shock 6.Humidity 7.Temperature cycle 8.Durability (mating / un-mating) 9.Resistance to soldering heat Storage temperature range -10c to +60c (Note 2) Storage humidity range Relative humidity 95% max. (No condensation) Operating temperature range -55c to +85c (Note 1) Specification 50 Mo min. No flashover or insulation breakdown. 100 mo max. No electrical discontinuity of 1s or more. No damage, cracks or parts dislocation. No electrical discontinuity of 1s or more. No damage, cracks or parts dislocation. Contact resistance: 120 mo max. Insulation resistance: 25 Mo min. No damage, cracks or parts dislocation. Contact resistance: 120 mo max. Insulation resistance: 50 Mo min. No damage, cracks or parts dislocation. Contact resistance: 120 mo max. No damage, cracks or parts dislocation. Conditions 100V DC 100V AC/one minute 100 mA Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 3 axis, 10 cycles Acceleration of 490 m/s2, 11 ms duration, sine halfwave waveform, 3 cycles / each of 3 axis 96 hours at 40c, 90% to 95% R.H. Temperature: -55c +15c to 35c +85c +15c to +35c Time: 30 2 to 3 30 2 to 3 (Minutes) 5 cycles 30 cycles Reflow: At the recommended temperature profile Manual soldering: 360c for 5 seconds No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Material Finish Insulator Polyamide Color: Black Plug Contacts Receptacle Phosphor bronze Ground plates Metal fittings Selective gold plated ------- Gold plated ------- Tin plated ------- Ordering information FX12 1 1 Series name: FX12 2 Configuration B: Without guide post 3 Number of positions: 24, 40, 60 B - 24 P - 0.4 SV 2 3 4 5 6 4 Connector type P: Plug S: Receptacle 5 Contact pitch: 0.4 mm 6 Termination configuration SV: SMT A264 Remarks UL94V-0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products on the Hirose website RoHS1.5 search at Board-to-Board www.hirose-connectors.com, or contact your Hirose salesShields representative. FX12 status Series0.4 mm Pitch, mm Connectors with Dual Plugs 4.90.2 A0.12 B0.1 P=0.40.06 (0.15) (0.3) (0.1) 1.340.3 C0.3 BRecommended PCB Mounting Pattern and Metal Mask Dimensions Recommended metal mask thickness: 0.12 mm G 0.230.02 (Land pattern ) 0.20.02 (Metal mask) 0.4 0.40.02 (Land pattern) 0.350.02 (Metal mask) 1 1+0.1 0 (Land pattern) 0.90.02 (Metal mask) 5.2 +0.05 0 0 3.8 -0.05 0 3.4 -0.05 G0.04 A0.12 B 0 D -0.1 0 E+0.1 Notes: 1 2 Positions marked indicate a ground circuit connections. The co-planarity of SMT terminations is 0.1 maximum. 4 No polarity orientation for board mounting. Dimensions in parentheses ( ) are reference dimensions. 5 All dimensions in mm. 3 Part number CL No. Number of positions A B C D E FX12B-24P-0.4SV 573-1005-0 24 5.4 4.4 10.6 09.1 11.0 FX12B-40P-0.4SV 573-1001-0 40 8.6 7.6 13.8 12.3 14.2 FX12B-60P-0.4SV 573-1007-6 60 12.6 11.6 17.79 16.3 18.2 RoHS YES Packaging : 3,000 pieces per reel A265 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.5 be discontinued soon. Please checkConnectors the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX12 Series0.4 mm Pitch, mm Board-to-Board with Dual Shields Receptacles 4.20.2 A0.12 B0.1 P=0.40.06 (0.15) (0.3) 1.20.3 (0.1) C0.3 BRecommended PCB Mounting Pattern and Metal Mask Dimensions Recommended metal mask thickness: 0.12 mm G 0.4 0.40.02 (Land pattern) 0.350.02 (Metal mask) 0 2 -0.1 4 5.3 MIN. 0.230.02 (Land pattern) 0.20.02 (Metal mask) 1+0.1 0 (Land pattern) 0.90.02 (Metal mask) 5 4.6 +0.05 0 0 3.04 -0.05 0 2.76 -0.05 G0.04 A0.12 B 0 D -0.1 E +0.1 0 4 F MIN. 1 Notes: 1 2 3 4 Positions marked indicate a ground circuit connections. The co-planarity of SMT terminations is 0.1 maximum. No polarity orientation for board mounting. Do NOT place any components within area indicated by the broken line 6 Do NOT place conductive traces in areas indicated by Dimensions in parentheses ( ) are reference dimensions. 7 All dimensions in mm. 5 . Part number CL No. Number of positions A B C D E F FX12B-24S-0.4SV 573-1006-3 24 5.4 4.4 08.14 6.6 08.5 11.1 FX12B-40S-0.4SV 573-1002-2 40 8.6 7.6 11.34 9.8 11.7 14.3 FX12B-60S-0.4SV 573-1008-9 60 12.6 11.6 15.34 13.8 15.7 18.3 Packaging : 3,000 pieces per reel A266 . RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products on the Hirose website RoHS1.5 search at Board-to-Board www.hirose-connectors.com, or contact your Hirose salesShields representative. FX12 status Series0.4 mm Pitch, mm Connectors with Dual Packaging Specifications 120.1 40.1 .1 +0 0 .5 O1 (1.7) (0.5) (0.3) B0.3 A0.1 20.1 1.750.1 Plug Unreeling direction Reel dimensions (C) Part number A B C FX12B-24P-0.4SV 11.5 24.0 24.4 FX12B-40P-0.4SV 11.5 24.0 24.4 FX12B-60P-0.4SV 14.2 32.0 32.4 (O80) (O380) O1 3 0. 5 (2) All dimensions in mm A267 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.5 be discontinued soon. Please checkConnectors the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX12 Series0.4 mm Pitch, mm Board-to-Board with Dual Shields Packaging Specifications 120.1 40.1 .1 +0 0 .5 O1 (1.7) (0.3) B0.3 A0.1 20.1 1.750.1 Receptacle Unreeling direction Reel dimensions Part number A B C FX12B-24S-0.4SV 11.5 24.0 24.4 FX12B-40S-0.4SV 11.5 24.0 24.4 FX12B-60S-0.4SV 11.5 24.0 24.4 All dimensions in mm A268 (O80) (O380) O1 3 0. 5 (2) (C) (0.5) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products on the Hirose website RoHS1.5 search at Board-to-Board www.hirose-connectors.com, or contact your Hirose salesShields representative. FX12 status Series0.4 mm Pitch, mm Connectors with Dual BRecommended solder temperature profile. MAX 250c 260 240 220c Temperature (c) 220 200c 200 180 160 140 < HRS test conditions > Solder method :Reflow Environment :Room air Solder paste Test board :96.5%Sn/3.0%Ag/0.5%Cu :Glass epoxy 40mm30mm1mm Metal mask thick :0.12mm thick Reflow cycles :2cycles 150c The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may very, 0 (90~120sec.) (MAX 60sec.) Time (Seconds) depending on solder paste type, volume / thickness and board size/ thickness. Cosult your solder paste and equipment manufacture for specific recommendations. Note: The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. BCleaning recommendations Organic solvent cleaning Room temperature cleaning Heated cleaning IPA (Isoporopyl alcohol) Solvent type YES YES HCFC (Hydrochlorofluorocarbon) YES YES Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes it's affects on metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. A269 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.5 be discontinued soon. Please checkConnectors the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX12 Series0.4 mm Pitch, mm Board-to-Board with Dual Shields BHandling Precautions when mating mounted connectors. MAX 0.3 FX12*-**S-0.4SV FX12*-**P-0.4SV Fig.1 MAX 0.3 Start the engagement of the connectors within the specified self-alignment range of 0.3 mm, while keeping the boards parallel to each other. (0.5mm) (0.5mm) Do NOT start mating of the mounted connectors under an angle. Correctly position the connectors over each other and assure that both boards are parallel to each other. Caution A270 When the connectors are correctly aligned (and both boards are parallel to each other) apply even force until full mating is confirmed by the "click" sensation. When the connectors are mounted on the FPC, special care should be excercised NOT to have the forces of the FPC's bend or twist affecting the fully mated connectors. Device case or cushioning material should be used to keep connectors fully mated. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products on the Hirose website RoHS1.5 search at Board-to-Board www.hirose-connectors.com, or contact your Hirose salesShields representative. FX12 status Series0.4 mm Pitch, mm Connectors with Dual BHandling Precautions when un-mating Keep the boards (with mounted connectors) parallel to each other. If parallel disconnection is impossible, start un-mating at one end exercising extreme caution to apply force at the center of the connector itself, away from the solder joint rows (Ref. Fig A and Fig. B) Fig. A Fig. B Do NOT start disconnection at the sides as the connector can be damaged, voiding the warranty and making the reengagement impossible. A271 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.5 be discontinued soon. Please checkConnectors the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX12 Series0.4 mm Pitch, mm Board-to-Board with Dual Shields BTechnical Documentation Eye Pattern Output Waveform Shielding Characteristics (1) (Measurement Results Using a 2-Chamber Shielded Room) 60 Sample 1 50 Shielding Effect (dB) Sample 2 40 Sample 3 30 20 10 0 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 3 Frequency (GHz) Explanatory Note Measurement values of the unshielded connectors were set as the zero level of the vertical axis of the graph. The graph uses unshielded connectors as the reference and indicates the noise leakage suppression (shielding) effect of the shielded connectors as a relative comparison value. In comparison to the unshielded connectors there was a noise suppression effect of 10 dB to 30 dB over the frequency range of 100 MHz to 3 GHz. Shielding Characteristics (2) (Board-to-Board Shielding Comparison Using a Magnetic Field Probe Method: IEC 61967-6 Compliance) [dBA /m] 125.00 122.50 120.00 117.50 115.00 112.50 110.00 107.50 105.00 102.50 100.00 Without shields With shields Explanatory Note A signal of the 266 MHz operating frequency was transmitted through all contacts, over a frequency range of 10 MHz to 3 GHz. The magnetic field leaking to the surroundings from the gap between the boards was measured with a magnetic probe to provide the (mapping data) results. A272