77 Type 095 is modular to Type 093 Type 095 Type 083 Screw type terminal block, solderable, centerline 5.08 mm / 0.200 inches, horizontal wire entry, lift system, modular Screw type terminal block, solderable, centerline 5.08 mm / 0.197 inches, horizontal wire entry, wire protector, modular Technical Data Technical Data V / A / AWG 300 / 10 / 26 - 16 0.12 - 1 mm 250 V / 4 kV / 10 A V / A / AWG 300 / 20 / 22 - 14 V / A / AWG 300 / 20 / 22 - 14 Insulation co-ordination according to EN 60664-1 Clearance and creepage distances min. 3.2 mm Insulating material class CTI 600 Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 250 630 630 Rated test voltage 2.5 6 4 Protection category according to IEC 529 IP20 Tightening torque UL 4.4 lb-in max. Min. insul. strip length 6 mm Solder pin dimension 0.5 x 1.0 mm Recommended pc board hole dia. O 1.3 mm Solder pin length 3.2 mm Pole size 2-3 Color black Insulation co-ordination according to EN 60664-1 Clearance and creepage distances min. 3.9 mm Insulating material class CTI 600 Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 250 630 630 Rated test voltage 2.5 6 4 Protection category according to IEC 529 IP20 Tightening torque UL 4.4 lb-in max. Min. insul. strip length 8 mm Solder pin dimension 0.9 mm Recommended pc board hole dia. O 1.3 mm Solder pin length 4 mm Pole size 2-3 Color black Dimensions in mm Dimensions in mm 1 mm = 0.0394 in. 1 mm = 0.0394 in. L = (pole size - 1) x centerline + 5.08 mm / 0.200 inches L = (pole size - 1) x centerline + 5.08 mm / 0.200 inches Part numbers (P/N) Part numbers (P/N) (information: page 56) Complete the part number by adding the pole size. Type 095 centerline 5.08 mm / 0.200 inches (information: page 56) Complete the part number by adding the pole size. Type 083 02 03 P/N 310951 centerline 5.08 mm / 0.200 inches 02 03 P/N 310831 Standard pole sizes Standard pole sizes Available on demand. Minimum order quantity 5000 pieces per item. Available on demand. Minimum order quantity 5000 pieces per item. A