Model CHS
Surface Mount Slide Switch
.050(Lead Pitch
Features
zTape Sealed to Allow for Automatic Processing
zGull Wing and J Lead
zHighly Automated Assembly
zBulk or Tape and Reel Packaging
Part Number CHS 06 T A
Model
Number = Positions
02:2
04:4
06:6
08:8
10:10
Packaging
Blank = Bulk
T = Tape and Reel/500 Units
Terminal Type
A = J Hook
B = Gull Wing
Marking
Units Marked With Two Digit Date Code, Switch Position
Marks
SPECIFICATIONS
General
Operating Temp. Range : -40°C TO +85°C
Storage Temp. Range : -40°C TO +85°C
Sealing Method : Top Tape
Electrical
Contact Rating
Non-Switching : 100 mA @ 50 VDC max.
Switching : 25 mA @ 24 VDC max.
100 mA @ 6 VDC max.
Contact Resistance : 50 mVmax. @ 1KHz,
1.5 mA, 20 mV max.
Insulation Resistance : 1,000 MVmin.
@ 100 VDC
Dielectric Strength : 0.5 mA max. 500 VAC
@ 50 Hz for 60 Sec.
Mechanical
Operating Force : 0.05 ;0.5 kgƒ
Stop Strength : 1.0 kgƒ max.
Mechanical Life : 2,000 Cycles
Environmental (MIL-STD-202)
Thermal Shock:
(-40°C to +85°C, 30 min Dwell,
5 Cycles) See Criteria Note Below
Temp./Humidity:
(-10°C to +65°C, 0 ˜96% RH,
24 Hrs., 10 Cycles) See Criteria Note Below
Low Temp. Storage:
(-40°C, 96 Hrs.) See Criteria Note Below
High Temp. Storage:
(85°C, 96 Hrs.) See Criteria Note Below
Mechanical Life:
(2000 Cycles @ 0 Load or 100 mA, 6
VDC) See Criteria Note Below
Soldering Heat:
(240°C, 30 Sec.) See Criteria Note Below
Mechanical Shock:
(50 g, 11 mS, Semi-Sine Wave,
6 Axes, 3 Cycles) Contact Bounce 10 µS max.
Vibration:
(10 g, .060 DA, 10 to 500 Hz.,
2 Hrs, 3 Axes) Contact Bounce 10 µS max.
Criteria Note:
Contact Resistance Not Greater Than 50 mV
Insulation Resistance Not Less Than 1,000 MV
Operating Force Not Greater Than 1.0 kgƒ
44
CHS
Surface Mount Slide Switch
J-Hook
Lead Style (A)
PCB Land Pattern
(Reference)
Gull-Wing
Lead Style (B)
PCB Land Pattern
(Reference)
Schematic Table A
2————————— 4.1 mm (.161)
4————————— 6.60 mm (.260)
6————————— 9.20 mm (.362)
8————————— 11.7 mm (.461)
10 ————————— 14.3 mm (.563)
45
