Model CHS Surface Mount Slide Switch .050( Lead Pitch SPECIFICATIONS General Operating Temp. Range Storage Temp. Range Sealing Method Electrical Contact Rating Non-Switching Switching Contact Resistance Insulation Resistance Features z z z z Dielectric Strength Tape Sealed to Allow for Automatic Processing Gull Wing and J Lead Highly Automated Assembly Bulk or Tape and Reel Packaging Part Number CHS 06 T A Model Number = Positions 02 : 2 04 : 4 06 : 6 08 : 8 10 : 10 Packaging Blank = Bulk T = Tape and Reel/500 Units Terminal Type A = J Hook B = Gull Wing Marking Units Marked With Two Digit Date Code, Switch Position Marks Mechanical Operating Force Stop Strength Mechanical Life Environmental (MIL-STD-202) Thermal Shock: (-40C to +85C, 30 min Dwell, 5 Cycles) Temp./Humidity: (-10C to +65C, 0 96% RH, 24 Hrs., 10 Cycles) Low Temp. Storage: (-40C, 96 Hrs.) High Temp. Storage: (85C, 96 Hrs.) Mechanical Life: (2000 Cycles @ 0 Load or 100 mA, 6 VDC) Soldering Heat: (240C, 30 Sec.) Mechanical Shock: (50 g, 11 mS, Semi-Sine Wave, 6 Axes, 3 Cycles) Vibration: (10 g, .060 DA, 10 to 500 Hz., 2 Hrs, 3 Axes) : -40C TO +85C : -40C TO +85C : Top Tape : 100 mA @ 50 VDC max. : 25 mA @ 24 VDC max. 100 mA @ 6 VDC max. : 50 mV max. @ 1KHz, 1.5 mA, 20 mV max. : 1,000 MV min. @ 100 VDC : 0.5 mA max. 500 VAC @ 50 Hz for 60 Sec. : 0.05 ; 0.5 kg : 1.0 kg max. : 2,000 Cycles See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below Contact Bounce 10 S max. Contact Bounce 10 S max. Criteria Note: Contact Resistance Not Greater Than 50 mV Insulation Resistance Not Less Than 1,000 MV Operating Force Not Greater Than 1.0 kg 44 CHS Surface Mount Slide Switch J-Hook Lead Style (A) PCB Land Pattern (Reference) Gull-Wing Lead Style (B) PCB Land Pattern (Reference) Table A Schematic 2 -- -- -- -- -- -- -- -- -- 4.1 mm (.161) 4 -- -- -- -- -- -- -- -- -- 6.60 mm (.260) 6 -- -- -- -- -- -- -- -- -- 9.20 mm (.362) 8 -- -- -- -- -- -- -- -- -- 11.7 mm (.461) 10 -- -- -- -- -- -- -- -- -- 14.3 mm (.563) 45