CUSTOMER DRAWING Product Revisions Product Name D-142-50 J NAS Equiv. 1745-14 D-142-51 J 1745-15 D-142-52 J 1745-16 L1.52 (L0.06) 15.75 (0.620) 15.75 (0.620) 19.05 (0.750) Product Dimensions B min 2.80 (0.110) 4.45 (0.175) 7.11 (0.280) C min 3.175 (0.125) 5.08 (0.200) 7.62 (0.300) Cable Dimensions D E max min 3.175 1.40 (0.125) (0.055) 5.08 2.54 (0.100) (0.200) 7.62 4.06 (0.300) (0.160) MATERIALS 1. INSULATION SLEEVE: Heat shrinkable, radiation cross-linked polyvinylidene fluoride. Color: natural. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic, one grey, and one blue. APPLICATION 1. These parts are designed for shield terminations on cables having tin or silver plated shields and insulations rated for at least 105C and falling within size range listed. 2. These parts are designed to meet the requirements of Raychem Specification RT-1404. They also comply with National Aerospace Standard Part Drawing NAS-1745. See table above for equivalent size. 3. For installation techniques, see Raychem Assembly Procedure RCPS 100-70. 4. For other sizes available in this configuration, see Raychem Devices Specification Control Drawings D-142-56, -65 & -66. For best results, prepare the cable as shown: TITLE: Raychem Devices UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate 0.00 N/A 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. (105C) SOLDERSLEEVE LOW TEMPERATURE DOCUMENT NO.: D-142-50/-51/-52 ECO Number: Revision Date: 23JUN2017 ECO-17-009190 DRAWN BY: Drawn Date: PROD. Revision: DOC Revision: M. FORONDA 17-Jul-2000 SEE TABLE B1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None SIZE: A SHEET: 1 of 1