CUSTOMER DRAWING
(105°C) SOLDERSLEEVE
LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: D-142-50/-51/-52
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat shrinkable, radiation cross-linked polyvinylidene fluoride.
Color: natural.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic, one grey, and one blue.
APPLICATION
1. These parts are designed for shield terminations on cables having tin or silver plated shields and
insulations rated for at least 105C and falling within size range listed.
2. These parts are designed to meet the requirements of Raychem Specification RT-1404. They also
comply with National Aerospace Standard Part Drawing NAS-1745.
See table above for equivalent size.
3. For installation techniques, see Raychem Assembly Procedure RCPS 100-70.
4. For other sizes available in this configuration, see Raychem Devices Specification Control Drawings
D-142-56, -65 & -66.
For best results, prepare
the cable as shown: