66099 RADIATION TOLERANT TO-5 OPTOCOUPLER MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 09/09/03 Features: Applications: * * * * * * * * * Meets or exceeds MIL-PRF-19500 radiation requirements Current Transfer Ratio-150% typical 1kVdc electrical input to output isolation Base lead provided for conventional transistor biasing Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66099 Optocoupler consists of a 660 nm GaAIAs LED optically coupled to a photodiode detector driving a radiation tolerant transistor. This configuration has proven to be highly tolerant to both proton and total dose radiation. Available as standard and high voltage and commercial or screened levels. ABSOLUTE MAXIMUM RATINGS Input Diode Forward DC Current........................................................................................................................................40 mA Input Power Dissipation (Note 1) .....................................................................................................................................80 mW Input-Output Isolation Voltage ................................................................................................................1000 V Reverse Input Voltage ............................................................................................................................................................3 V Collector-Base Voltage -00X, -10X.......................................................................................................................................40 V Collector-Base Voltage -40X ..............................................................................................................................................150 V Collector-Emitter Voltage -00X, -10X ...................................................................................................................................40 V Collector-Emitter Voltage -40X ...........................................................................................................................................150 V Emitter-Base Voltage -00X, -10X.............................................................................................................................................4 V Emitter-Base Voltage -40X ......................................................................................................................................................6 V Continuous Collector Current .............................................................................................................................................50 mA Continuous Transistor Power Dissipation (Note 2) ........................................................................................................300 mW Storage Temperature..........................................................................................................................................-65C to +150C Operating Free-Air Temperature Range.............................................................................................................-55C to +100C Lead Solder Temperature (10 seconds, 1/16" from case) ................................................................................................ 240C Notes: 1. Derate linearly 1.0 mW/C above 25C. 2. Derate linearly 4.0 mW/C above 25C. Package Dimensions Schematic Diagram 0.172 [4.37] 0.162 [4.11] 0.040 [1.02] MAX 0.039 [0.99] 0.029 [0.74] 45 3 C 0.036 [0.91] 0.026 [0.66] 1 0.328 [8.33] 0.318 [8.08] A 5 0.365 [9.27] 0.355 [9.02] O0.200 [5.08] 2 7 3 6 5 6 LEADS O0.019 [0.48] O0.016 [0.41] 1 E K 7 0.500 [12.70] MIN ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 2 B 66099 RADIATION TOLERANT TO-5 OPTOCOUPLER 09/09/03 INPUT DIODE CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN TYP Input Diode Static Reverse Current IR Input Diode Static Forward Voltage VF MAX UNITS TEST CONDITIONS 100 A VR = 2V 2 V IF = 10mA UNITS TEST CONDITIONS V IC = 100A, IE = 0, IF = 0 V IC = 1mA, IB = 0, IF = 0 V IC = 0mA, IE = 100A, IF = 0 100 nA VCE = 20V MAX UNITS TEST CONDITIONS % VCE = 1V, IF = 10mA 0.8 OUTPUT TRANSISTOR CHARACTERISTICS TA = 25C unless otherwise noted PARAMETER SYMBOL MIN TYP MAX Collector-Base Breakdown Voltage -00X 40 -10X V(BR)CBO -40X Collector-Emitter Breakdown Voltage 40 -00X -10X V(BR)CEO 40 150 -40X Emitter-Base Breakdown Voltage 40 150 4 -00X -10X V(BR)EBO 4 6 -40X Collector-Emitter Cutoff Current ICEO COUPLED CHARACTERISTICS TA = 25C unless otherwise noted PARAMETER SYMBOL MIN TYP Current Transfer Ratio CTR Collector-Emitter Saturation Voltage 100 0.3 VCE(SAT) Input-Output Isolation Voltage 1000 V I-O V IF = 20 mA, IC = 10mA V II-O = 100 nA Rise Time tr 20 s VCC = 10V, IF = 10mA, Fall Time tf 20 s VCC = 10V, IF = 10mA, RL = 100 RL = 100 RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level IFL 0 10 A Input Current, High Level IFH 1 20 mA Operating Temperature TA -55 100 C SELECTION GUIDE PART NUMBER 66099-003 66099-101 66099-103 66099-105 66099-401 66099-415 PART DESCRIPTION Commercial Screened TX screening plus Group A TXV screening plus Group A High Voltage, Commercial High voltage, Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM