MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EMSL12 PLASTIC 2.5V OS7P 10/11
EMSL12 Series
OSCILLATOR
EMSL12
ELECTRICAL SPECIFICATIONS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
• MEMS Clock Oscillator
• HCSL Output
• +2.5V Supply Voltage
• Complementary Output
• Output Enable and Standby Options
• 6 Pad Plastic SMD Package
• 30,000 G Shock Resistance
• RoHS Compliant (Pb-free)
H 0.85
L 7.0
W 5.0
1.000MHz to 220.000MHz
0°C to +70°C, -20°C to +70°C, or -40°C to +85°C
-55°C to +125°C
+2.5VDC ±0.125VDC
65mA Maximum
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
750mVDC Typical, 600mVDC Minimum
25mVDC Typical, 50mVDC Maximum
300pSec Typical, 350pSec Maximum
50 ±5(%)
50 Ohms to ground
Output Enable and Complementary Output,
or Stanby and Complementary Output
Enables Outputs
Enables Outputs
Disables Outputs: High Impedance
60mA Maximum (OE)
30µA Maximum (ST)
±1ppm Maximum
10mSeconds Maximum
0.2pSec Typical
2.0pSec Typical
1.5pSec Typical, 3.0pSec Maximum
20pSec Typical, 25pSec Maximum
10pSec Typical
1.7pSec Typical
1.6pSec Typical
1.6pSec Typical
0.8pSec Typical
0.6pSec Typical
0.4pSec Typical
0.7pSec Typical
0.5pSec Typical
0.4pSec Typical
Nominal Frequency (MHz)
Some frequencies within this range may
not be available
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Frequency Tolerance / Stability
Some tolerance stability options
may not be available
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Logic Control / Additional Output
Output Control Input Voltage
Output Enable Current
Standby Current
Aging
Start Up Time
Period Jitter
RMS Phase Jitter (Random)
Fj=637kHz to 10MHz
RMS Phase Jitter (Random)
Fj=1.5MHz to 22MHz
RMS Phase Jitter (Random)
Fj=1.875MHz to 20MHz
Excluding Load Termination Current
Inclusive of All Conditions: Calibration Tolerance at 25°C, Fre-
quency Stability over the Operating Temperature Range, Supply
Voltage Change, Output Load Change, 1st Year Aging at 25°C,
Reflow, Shock, and Vibration
20% to 80% of waveform
at 50% of waveform
Output and Complementary Output
VIH of 70% of VCC Minimum
No Connection
VIL of 30% of VCC Maximum
Without Load
Without Load
First Year at 25°C
Deterministic
Random
RMS
pk-pk
Cycle to Cycle
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EMSL12 PLASTIC 2.5V OS7P 10/11
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
EMSL12 C 2 H - 100.000M TR
PART NUMBERING GUIDE
AVAILABLE OPTIONS
Blank=Bulk
TR=Tape & Reel
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
H=Output Enable (OE) and Complementary Output
J=Standby (ST) and Complementary Output
DUTY CYCLE
2=50 ±5(%)
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
J=±25ppm Maximum over -40°C to +85°C
L=±100ppm Maximum over -20°C to +70°C
M=±50ppm Maximum over -20°C to +70°C
N=±25ppm Maximum over -20°C to +70°C
A B C D E F
16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1
F G H J K L
8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0*
TAPE
M N O P Q
1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN
R S T U V
QTY/REEL
2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 1,000
REEL
*Compliant to EIA 481A
Tolerances= +0.1
Pin 1: Output Enable (OE) or
Standby (ST)
Pin 2: No Connect
Pin 3: Case Ground
Pad 4: Output
Pad 5: Complementary
Output
Pad 6: Supply Volttage
3
2
1
A
4
5
6
7.00
±0.15 2.30
1.47
1.20 ±0.10 (x6)
5.00
±0.15
0.85
±0.15
0.08
MAX
1.40
±0.10 (x6)
Note A: Center paddle is connected
internally to oscillator ground (Pad 3).
5.08
±0.10
2.60
±0.15
2.54 TYP
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
2.39
Characteristic Specification
ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM: 2000V
Flammability UL94-V0
Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity Level J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003 (Six I/O Pads on
bottom of package only)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A, 20G
Line 1: XXXX or XXXXX
Ecliptek Manufacturing Lot Code
